Skip to content
Permalink
master
Switch branches/tags

Name already in use

A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?

TARGET_CYW943012BTEVK-01/README.md

Go to file
 
 
Cannot retrieve contributors at this time
CYW943012BTEVK-01 Overview Kit Features Kit Contents Additional Information
27 lines (19 sloc) 1.39 KB
Raw Blame
Open in GitHub Desktop

CYW943012BTEVK-01

Overview

The Infineon CYW943012BTEVK-01 Evaluation kit enables you to evaluate and develop Bluetooth® applications using the CYW43012 (802.11n/802.11ac-Friendly Dual-Band Wi-Fi and Bluetooth® Combo) The CYW43012 is a 28-nm, ultra-low power single-chip device with an integrated Bluetooth® subsystem supporting LE/BR/EDR. This kit helps evaluate device functionality and develop embedded Bluetooth® applications quickly for faster time-to-market.

Kit Features

  • CYW43012 single chip, Wi-Fi + Bluetooth® Combo system on chip that includes a baseband processor, an Arm® Cortex®-M4 processor, and integrated transceiver.
  • Audio Arduino shield with on-board analog microphones, audio codec chip, headphone and speaker output
  • On-board sensors: an ambient light sensor, thermistor, and Infineon IM69D127 digital microphone
  • User switches and LEDs
  • USB connector for power, programming, and USB-UART bridge

Kit Contents

  • CYW9BTM2BASE1 Baseboard
  • CYW943012M2BT1LV radio card (pre-assembled on baseboard M.2 connector)
  • CYW9BT Audio 3 Arduino shield
  • USB Standard-A to Micro-B cable
  • Power Adapter

Additional Information

  • Max UART baud rate is 3M.
  • Pins P5, P6, and P7 cannot be multiplexed with peripherals. They may be used as simple GPIO only, per the CYW43012 data sheet.
  • Pin P8 may be used as an output only, per the CYW43012 data sheet.