Skip to content
Permalink
master
Switch branches/tags

Name already in use

A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?
Go to file
 
 
Cannot retrieve contributors at this time
/***************************************************************************//**
* \file system_cyw20829.c
* \version 1.3
*
* The device system-source file.
*
********************************************************************************
* \copyright
* Copyright (c) (2020-2022), Cypress Semiconductor Corporation (an Infineon company) or
* an affiliate of Cypress Semiconductor Corporation.
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*******************************************************************************/
#include "cy_device.h"
#if defined (CY_DEVICE_CYW20829)
#include <stdbool.h>
#include "system_cat1b.h"
#include "cy_syslib.h"
#include "cy_wdt.h"
#include "cy_sysclk.h"
#include "cy_syspm.h"
CY_MISRA_DEVIATE_BLOCK_START('ARRAY_VS_SINGLETON', 1, \
'Checked manually. Using pointer as an array will not corrupt or misinterpret adjacent memory locations.')
CY_MISRA_DEVIATE_BLOCK_START('MISRA C-2012 Rule 18.1', 1, \
'Checked manually. Dereferencing a pointer to one beyond the end of an array will not result in undefined behaviour.')
CY_MISRA_DEVIATE_BLOCK_START('MISRA C-2012 Rule 18.3', 1, \
'Checked manually. Attempting to make comparisons between pointers will not result in undefined behaviour.')
CY_MISRA_FP_BLOCK_START('MISRA C-2012 Rule 8.6', 2, \
'Checked manually. The definition is a part of linker script or application.')
/*******************************************************************************
* SystemCoreClockUpdate()
*******************************************************************************/
/** Default HFClk frequency in Hz */
#define CY_CLK_HFCLK0_FREQ_HZ_DEFAULT (48000000UL)
/** Default PeriClk frequency in Hz */
#define CY_CLK_PERICLK_FREQ_HZ_DEFAULT (48000000UL)
/** Default system core frequency in Hz */
#define CY_CLK_SYSTEM_FREQ_HZ_DEFAULT (48000000UL)
/** Holds the CLK_HF0 system core clock. */
uint32_t SystemCoreClock = CY_CLK_SYSTEM_FREQ_HZ_DEFAULT;
/** Holds the HFClk0 clock frequency. Updated by \ref SystemCoreClockUpdate(). */
uint32_t cy_Hfclk0FreqHz = CY_CLK_HFCLK0_FREQ_HZ_DEFAULT;
/** Holds the PeriClk clock frequency. Updated by \ref SystemCoreClockUpdate(). */
uint32_t cy_PeriClkFreqHz = CY_CLK_PERICLK_FREQ_HZ_DEFAULT;
/** Holds the AHB frequency. Updated by \ref SystemCoreClockUpdate(). */
uint32_t cy_AhbFreqHz = CY_CLK_SYSTEM_FREQ_HZ_DEFAULT;
/*******************************************************************************
* SystemCoreClockUpdate (void)
*******************************************************************************/
/* Do not use these definitions directly in your application */
#define CY_DELAY_MS_OVERFLOW_THRESHOLD (0x8000u)
#define CY_DELAY_1K_THRESHOLD (1000u)
#define CY_DELAY_1K_MINUS_1_THRESHOLD (CY_DELAY_1K_THRESHOLD - 1u)
#define CY_DELAY_1M_THRESHOLD (1000000u)
#define CY_DELAY_1M_MINUS_1_THRESHOLD (CY_DELAY_1M_THRESHOLD - 1u)
uint32_t cy_delayFreqHz = CY_CLK_SYSTEM_FREQ_HZ_DEFAULT;
uint32_t cy_delayFreqKhz = (CY_CLK_SYSTEM_FREQ_HZ_DEFAULT + CY_DELAY_1K_MINUS_1_THRESHOLD) /
CY_DELAY_1K_THRESHOLD;
uint8_t cy_delayFreqMhz = (uint8_t)((CY_CLK_SYSTEM_FREQ_HZ_DEFAULT + CY_DELAY_1M_MINUS_1_THRESHOLD) /
CY_DELAY_1M_THRESHOLD);
#if defined (CY_PDL_FLASH_BOOT)
#if !defined (__ARMCC_VERSION)
void bootstrapInit(void)
{
typedef struct
{
uint32_t* dest;
uint32_t wlen;
} __bootstrap_zero_table_t;
extern const __bootstrap_zero_table_t __bootstrapzero_table_start__;
extern const __bootstrap_zero_table_t __bootstrapzero_table_end__;
/* Initialize .cy_l1bss section to zero */
for (__bootstrap_zero_table_t const* pTable = &__bootstrapzero_table_start__; pTable < &__bootstrapzero_table_end__; ++pTable)
{
for(uint32_t i=0u; i<pTable->wlen; ++i)
{
pTable->dest[i] = 0u;
}
}
}
#endif
#endif /* CY_PDL_FLASH_BOOT */
void SystemInit_CAT1B_CM33(void)
{
/* Release reset for all groups IP except group 0 and group 3 */
(void)Cy_SysClk_PeriGroupSetSlaveCtl(1, CY_SYSCLK_PERI_GROUP_SL_CTL2, 0x0U); /* typecast void to suppress a compiler warning about unused return value */
(void)Cy_SysClk_PeriGroupSetSlaveCtl(2, CY_SYSCLK_PERI_GROUP_SL_CTL2, 0x0U); /* typecast void to suppress a compiler warning about unused return value */
(void)Cy_SysClk_PeriGroupSetSlaveCtl(3, CY_SYSCLK_PERI_GROUP_SL_CTL2, 0x1U); /* typecast void to suppress a compiler warning about unused return value */
(void)Cy_SysClk_PeriGroupSetSlaveCtl(1, CY_SYSCLK_PERI_GROUP_SL_CTL, 0xFFFFFFFFU); /* typecast void to suppress a compiler warning about unused return value */
(void)Cy_SysClk_PeriGroupSetSlaveCtl(2, CY_SYSCLK_PERI_GROUP_SL_CTL, 0xFFFFFFFFU); /* typecast void to suppress a compiler warning about unused return value */
(void)Cy_SysClk_PeriGroupSetSlaveCtl(3, CY_SYSCLK_PERI_GROUP_SL_CTL, 0xFFFFFFFFU); /* typecast void to suppress a compiler warning about unused return value */
Cy_PDL_Init(CY_DEVICE_CFG);
(void)Cy_SystemInit(); /* typecast void to suppress a compiler warning about unused return value */
/* Unlock and disable WDT */
Cy_WDT_Unlock();
Cy_WDT_Disable();
SystemCoreClockUpdate();
}
CY_SECTION_RAMFUNC_BEGIN
/*******************************************************************************
* Function Name: SystemInit_Warmboot_CAT1B_CM33
****************************************************************************//**
*
* Prepares the system to work after warmboot:
* - Intializes Vector Table
* - Enables all the IP's through Slave Control Registers
* - Unfreezes the IO's
*
*******************************************************************************/
void SystemInit_Warmboot_CAT1B_CM33()
{
SCB->VTOR = (uint32_t)__ns_vector_table_rw;
(void)Cy_SysClk_PeriGroupSetSlaveCtl(1, CY_SYSCLK_PERI_GROUP_SL_CTL2, 0x0U);
(void)Cy_SysClk_PeriGroupSetSlaveCtl(2, CY_SYSCLK_PERI_GROUP_SL_CTL2, 0x0U);
(void)Cy_SysClk_PeriGroupSetSlaveCtl(1, CY_SYSCLK_PERI_GROUP_SL_CTL, 0xFFFFFFFFU);
(void)Cy_SysClk_PeriGroupSetSlaveCtl(2, CY_SYSCLK_PERI_GROUP_SL_CTL, 0xFFFFFFFFU);
(void)Cy_SysClk_PeriGroupSetSlaveCtl(3, CY_SYSCLK_PERI_GROUP_SL_CTL, 0xFFFFFFFFU);
if (Cy_SysPm_DeepSleepIoIsFrozen())
{
Cy_SysPm_DeepSleepIoUnfreeze();
}
cy_WakeupFromWarmBootStatus = true;
}
CY_SECTION_RAMFUNC_END
#define CY_NVIC_REG_COUNT 3U
#define CY_NVIC_IPR_REG_COUNT 69U
uint32_t nvicStoreRestore[CY_NVIC_REG_COUNT];
uint32_t nvicIPRStoreRestore[CY_NVIC_IPR_REG_COUNT];
uint32_t scbSHPR3StoreRestore;
#define SCB_SHPR3_REG ( *( ( volatile uint32_t * ) 0xe000ed20 ) )
/*******************************************************************************
* Function Name: System_Store_NVIC_Reg
****************************************************************************//**
*
* Stores the NVIC register before Deepsleep RAM:
*
*******************************************************************************/
CY_SECTION_RAMFUNC_BEGIN
void System_Store_NVIC_Reg(void)
{
for (uint8_t idx = 0; idx < CY_NVIC_REG_COUNT; idx++)
{
nvicStoreRestore[idx] = NVIC->ISER[idx];
}
for (uint8_t idx = 0; idx < CY_NVIC_IPR_REG_COUNT; idx++)
{
nvicIPRStoreRestore[idx] = NVIC->IPR[idx];
}
scbSHPR3StoreRestore = SCB_SHPR3_REG;
}
CY_SECTION_RAMFUNC_END
/*******************************************************************************
* Function Name: System_Restore_NVIC_Reg
****************************************************************************//**
*
* Restores the NVIC register After Deepsleep RAM Wakeup i.e. Warmboot:
*
*******************************************************************************/
CY_SECTION_RAMFUNC_BEGIN
void System_Restore_NVIC_Reg(void)
{
for (uint8_t idx = 0; idx < CY_NVIC_REG_COUNT; idx++)
{
NVIC->ISER[idx] = nvicStoreRestore[idx];
}
for (uint8_t idx = 0; idx < CY_NVIC_IPR_REG_COUNT; idx++)
{
NVIC->IPR[idx] = nvicIPRStoreRestore[idx];
}
SCB_SHPR3_REG = scbSHPR3StoreRestore;
}
CY_SECTION_RAMFUNC_END
void SystemInit(void)
{
#ifdef CY_PDL_FLASH_BOOT
#if !defined (__ARMCC_VERSION)
bootstrapInit();
#endif
#endif
SystemInit_CAT1B_CM33();
};
/*******************************************************************************
* Function Name: Cy_SystemInit
****************************************************************************//**
*
* The function is called during device startup.
*
*******************************************************************************/
__WEAK void Cy_SystemInit(void)
{
/* Empty weak function.
*/
__NOP(); /* No operation */
}
/*******************************************************************************
* Function Name: SystemCoreClockUpdate
****************************************************************************//**
*
* The function is called during device startup.
*
*******************************************************************************/
void SystemCoreClockUpdate (void)
{
uint32_t pathFreqHz;
uint32_t clkHfPath;
/* Get frequency for the high-frequency clock # 0 */
clkHfPath = CY_SYSCLK_CLK_CORE_HF_PATH_NUM;
pathFreqHz = Cy_SysClk_ClkHfGetFrequency(clkHfPath);
SystemCoreClock = pathFreqHz;
cy_Hfclk0FreqHz = SystemCoreClock;
/* Get frequency for the high-frequency clock # 2 , whcih is used for PERI PCLK*/
clkHfPath = CY_SYSCLK_CLK_PERI_HF_PATH_NUM;
pathFreqHz = Cy_SysClk_ClkHfGetFrequency(clkHfPath);
cy_PeriClkFreqHz = pathFreqHz;
/* Sets clock frequency for Delay API */
cy_delayFreqHz = SystemCoreClock;
cy_delayFreqMhz = (uint8_t)((cy_delayFreqHz + CY_DELAY_1M_MINUS_1_THRESHOLD) / CY_DELAY_1M_THRESHOLD);
cy_delayFreqKhz = (cy_delayFreqHz + CY_DELAY_1K_MINUS_1_THRESHOLD) / CY_DELAY_1K_THRESHOLD;
/* Get the frequency of AHB source, CLK HF0 is the source for AHB*/
cy_AhbFreqHz = Cy_SysClk_ClkHfGetFrequency(0UL);
}
CY_MISRA_BLOCK_END('MISRA C-2012 Rule 8.6')
CY_MISRA_BLOCK_END('MISRA C-2012 Rule 18.3')
CY_MISRA_BLOCK_END('MISRA C-2012 Rule 18.1')
CY_MISRA_BLOCK_END('ARRAY_VS_SINGLETON')
#endif /* defined (CY_DEVICE_CYW20829) */
/* [] END OF FILE */