KIT_PSOC4-HVMS-64K_LITE-02 BSP

Overview

KIT_PSOC4-HVMS-64K_LITE-02 is a lite kit for the PSOC™ high-voltage (HV) mixed signal (MS) microcontrollers, a fully integrated programmable embedded systems for several automotive human machine interface (HMI), body and powertrain applications.

To use code from the BSP, simply include a reference to cybsp.h.

Features

Kit Features:

On-board Programmer and Debugger
Ready-to-Use CAPSENSE™ Buttons
A 12-bit SAR ADC
Fifth-generation multi-sense converter (MSC) block supporting capacitive sensing (CAPSENSE™)
Digital peripherals, such as PWMs
Serial communication interfaces along with a LIN/CXPI interface with integrated PHY
High-voltage subsystem to operate directly off the 12-V car battery

Kit Contents:

KIT_PSOC4-HVMS-64K_LITE-02 Board
USB Type-A to Micro-B cable
Quick Start Guide

Low-level Driver References:

See Peripheral driver library (PDL) library

BSP Configuration

The BSP has a few hooks that allow its behavior to be configured. Some of these items are enabled by default while others must be explicitly enabled. Items enabled by default are specified in the bsp.mk file. The items that are enabled can be changed by creating a custom BSP or by editing the application makefile.

Components:

Device specific category reference (e.g.: CAT1) - This component, enabled by default, pulls in any device specific code for this board.

Defines:

CYBSP_WIFI_CAPABLE - This define, disabled by default, causes the BSP to initialize the interface to an onboard wireless chip if it has one.
CY_USING_HAL - This define, enabled by default in some BSPs, specifies that the HAL is intended to be used by the application. This will cause the BSP to include the applicable header file and to initialize the system level drivers. Newer BSPs pull in the v3.x HAL, which enables itself via its own makefile, so CY_USING_HAL is not present.
CYBSP_CUSTOM_SYSCLK_PM_CALLBACK - This define, disabled by default, causes the BSP to skip registering its default SysClk Power Management callback, if any, and instead to invoke the application-defined function cybsp_register_custom_sysclk_pm_callback to register an application-specific callback.

Clock Configuration

Clock	Source	Output Frequency
CLK_HF	CLK_IMO	24 MHz

Power Configuration

System Idle Power Mode: Deep Sleep
VDDA Voltage: 3300 mV
VDDD Voltage: 3300 mV

See the BSP Setttings for additional board specific configuration settings.

API Reference Manual

The KIT_PSOC4-HVMS-64K_LITE-02 Board Support Package provides a set of APIs to configure, initialize and use the board resources.

See the BSP API Reference Manual for the complete list of the provided interfaces.

More information

© Cypress Semiconductor Corporation (an Infineon company) or an affiliate of Cypress Semiconductor Corporation, 2019-2025.

License

Infineon/TARGET_KIT_PSOC4-HVMS-64K_LITE-02

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages