Skip to content
Permalink
master
Switch branches/tags

Name already in use

A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?

TARGET_KIT_XMC45_RELAX_V1/RELEASE.md

Go to file
 
 
Cannot retrieve contributors at this time
KIT_XMC45_RELAX_V1 BSP Release Notes What's Included? What Changed? v2.2.1 v2.2.0 v2.1.0 v2.0.0 v1.0.0 v0.5.0 Supported Software and Tools More information
58 lines (49 sloc) 3.57 KB
Raw Blame
Open in GitHub Desktop

KIT_XMC45_RELAX_V1 BSP Release Notes

XMC4500 Microcontroller - Detachable on-board debugger - Power over USB - ESD and reverse current protection - 2 x user button and 2 x user LED - 4 x SPI-Master, 3x I2C, 3 x I2S, 3 x UART, 2 x CAN, 17 x ADC (12 bit), 2 x DAC, 31x PMW mapped on 2 Pin Headers 2 x 20 0.1" - Micro-USB plug - Ethernet PHY and RJ45 jack - Real Time Clock crystal - 32 Mbit Quad-SPI Flash - microSD card slot.
Note: Programming this kit requires installing SEGGER J-Link software

NOTE: BSPs are versioned by family. This means that version 1.2.0 of any BSP in a family (eg: PSoC™ 6) will have the same software maturity level. However, not all updates are necessarily applicable for each BSP in the family so not all version numbers will exist for each board. Additionally, new BSPs may not start at version 1.0.0. In the event of adding a common feature across all BSPs, the libraries are assigned the same version number. For example if BSP_A is at v1.3.0 and BSP_B is at v1.2.0, the event will trigger a version update to v1.4.0 for both BSP_A and BSP_B. This allows the common feature to be tracked in a consistent way.

What's Included?

The KIT_XMC45_RELAX_V1 library includes the following:

  • BSP specific makefile to configure the build process for the board
  • cybsp.c/h files to initialize the board and any system peripherals
  • cybsp_types.h file describing basic board setup
  • Linker script & startup code for GCC and ARM toolchains
  • Configurator design files (and generated code) to setup board specific peripherals
  • .lib file references for all dependent libraries
  • API documentation

What Changed?

v2.2.1

  • Added memory-analyzer configuration support for KIT_XMC11_BOOT_001, KIT_XMC12_BOOT_001, KIT_XMC13_BOOT_001, KIT_XMC14_BOOT_001, KIT_XMC45_RELAX_V1, KIT_XMC_PLT2GO_XMC4200, and KIT_XMC_PLT2GO_XMC4400.

v2.2.0

  • Added functionality to enable BSP Assistant chip flow
  • Added capabilities to match BSPS created by BSP Assistant chip flow

v2.1.0

  • Add macro CYBSP_USER_BTN_DRIVE indicating the drive mode that should be used for user buttons

v2.0.0

Note: This revision is only compatible with ModusToolbox Tools 3.0 and newer.

  • Updated recipe-make, core-make, and XMClib to new major versions
  • Regenerated code with Configurators from ModusToolbox™ v3.0.0
  • Renamed top level board makefile to bsp.mk
  • Removed version.xml file in favor of new props.json

v1.0.0

  • Initial production release

v0.5.0

  • Initial pre-production release

Supported Software and Tools

This version of the KIT_XMC45_RELAX_V1 BSP was validated for compatibility with the following Software and Tools:

Software and Tools Version
ModusToolbox™ Software Environment 3.1.0
GCC Compiler 11.3.1

Minimum required ModusToolbox™ Software Environment: v3.0.0

More information

© Cypress Semiconductor Corporation (an Infineon company) or an affiliate of Cypress Semiconductor Corporation, 2019-2022.