Skip to content
Permalink
master
Switch branches/tags

Name already in use

A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?

TARGET_KIT_XMC_PLT2GO_XMC4200/README.md

Go to file
 
 
Cannot retrieve contributors at this time
KIT_XMC_PLT2GO_XMC4200 BSP Overview Features Kit Features: Kit Contents: BSP Configuration API Reference Manual More information
66 lines (44 sloc) 3.36 KB
Raw Blame
Open in GitHub Desktop

KIT_XMC_PLT2GO_XMC4200 BSP

Overview

Kit Platform2GO XTREME XMC4200 kit - This kit has the XMC4200 device with debugger plus CAN, Arduino, MikroBUS and Shields2Go form factor. Equipped with an ARM® Cortex®-M4 based XMC™ Microcontroller from Infineon Technologies AG, the XMC4200 Platform2Go is designed to evaluate the capabilities of Infineon's XMC4200 Microcontroller.
Note: Programming this kit requires installing SEGGER J-Link software

To use code from the BSP, simply include a reference to cybsp.h.

Features

Kit Features:

  • XMC4200 (ARM® Cortex®-M4 based) Microcontroller
  • On-board Debug Probe with USB interface supporting SWD + SWO
  • Detachable J-Link debugger and UART virtual COM port, with micro USB connector
  • Virtual COM Port via Debug Probe
  • Arduino Uno compatibility
  • Shields2Go connectivity
  • Ethernet-enabled communication option
  • Additional voltage level shifters
  • Available in four different assembly versions: 3.3V Shields (Lite), 5V (Lite)
  • CAN connectivity

Kit Contents:

  • KIT_XMC_PLT2GO_XMC4200 evaluation board

BSP Configuration

The BSP has a few hooks that allow its behavior to be configured. Some of these items are enabled by default while others must be explicitly enabled. Items enabled by default are specified in the KIT_XMC_PLT2GO_XMC4200.mk file. The items that are enabled can be changed by creating a custom BSP or by editing the application makefile.

Components:

  • Device specific category reference (e.g.: CAT1) - This component, enabled by default, pulls in any device specific code for this board.

Defines:

  • CYBSP_WIFI_CAPABLE - This define, disabled by default, causes the BSP to initialize the interface to an onboard wireless chip if it has one.
  • CY_USING_HAL - This define, enabled by default, specifies that the HAL is intended to be used by the application. This will cause the BSP to include the applicable header file and to initialize the system level drivers.
  • CYBSP_CUSTOM_SYSCLK_PM_CALLBACK - This define, disabled by default, causes the BSP to skip registering its default SysClk Power Management callback, if any, and instead to invoke the application-defined function cybsp_register_custom_sysclk_pm_callback to register an application-specific callback.

See the BSP Setttings for additional board specific configuration settings.

API Reference Manual

The KIT_XMC_PLT2GO_XMC4200 Board Support Package provides a set of APIs to configure, initialize and use the board resources.

See the BSP API Reference Manual for the complete list of the provided interfaces.

More information

© Cypress Semiconductor Corporation (an Infineon company) or an affiliate of Cypress Semiconductor Corporation, 2019-2022.