Skip to content
Permalink
master
Switch branches/tags

Name already in use

A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?

bless/cy_ble_ds.h

Go to file
 
 
Cannot retrieve contributors at this time
3682 lines (3682 sloc) 167 KB
Raw Blame
Open in GitHub Desktop
/********************************************************************************************************************//**
* \file cy_ble_ds.h
* \version 3.60
*
* \brief
* Contains the documentation data.
*
***********************************************************************************************************************
* \copyright
* Copyright 2016-2021, Cypress Semiconductor Corporation. All rights reserved.
* You may use this file only in accordance with the license, terms, conditions,
* disclaimers, and limitations in the end user license agreement accompanying
* the software package with which this file was provided.
***********************************************************************************************************************
*
* \mainpage Cypress PSoC 6 Bluetooth Low Energy Middleware Library 3.50
*
* \copydetails page_ble_general
* \copydetails page_group_ble_changelog
*
*
***********************************************************************************************************************
** \page page_ble_general General Description
**
* The Bluetooth Low Energy (BLE) middleware contains a comprehensive API to configure the BLE Stack and
* the underlying chip hardware. The standalone BT Configurator is shipped in ModusToolbox to make it easy
* to configure PSoC 6 BLE Middleware.
*
* Include cy_ble_common.h and cy_ble_event_handler.h to get access to all functions and other declarations
* in this library. If you are using the ModusToolbox BT Configurator, you can include cycfg_ble.h only.
*
* The PSoC 6 BLE Middleware incorporates a Bluetooth Core Specification v5.0 compliant protocol stack. You may
* access the GAP, GATT and L2CAP layers of the stack using the API.
*
* The API are broadly categorized as follows:
* - \ref group_ble_common_api
* - \ref group_ble_service_api
*
* <b>Features:</b>
* - Multi-link supports for up to four simultaneous connections in any combination of roles
* - Bluetooth v5.0 compliant protocol stack
* - LE 2 Mbps
* - Generic Access Profile (GAP) features
* - Broadcaster, Observer, Peripheral and Central roles
* - User-defined advertising data
* - Bonding support for up to 128 devices
* - Security modes 1 and 2
* - Generic Attribute Profile (GATT) features
* - GATT Client and Server
* - 16-, 32-, and 128-bit UUIDs
* - Special Interest Group (SIG) adopted GATT-based Profiles and Services, and quick prototype of new
* profile design through intuitive BT Configurator Custom Profile development;
* - Security Manager features
* - Pairing methods: Just works, Passkey Entry, Out of Band, Numeric Comparison (LE Secure connections)
* - Authenticated man-in-the-middle (MITM) protection and data signing
* - Logical Link Control and Adaption Protocol (L2CAP) connection-oriented channel
* - Link Layer (LL) features
* - Master and Slave roles
* - 128-bit AES encryption
* - Low Duty Cycle Advertising
* - LE Ping
* - Privacy 1.2
* - Data length extension (DLE)
*
***************************************************************************
**\section group_ble_when_use When to use the BLE
**
* BLE is used in very low-power network and Internet of Things (IoT) solutions using low-cost battery
* operated devices that can quickly connect and form simple wireless links. Target applications include
* HID, remote controls, sports and fitness monitors, portable medical devices and smart phone accessories,
* among many others.
*
***************************************************************************
**\section group_ble_sig_adopted SIG adopted Profiles and Services
**
* The BLE resource supports numerous SIG-adopted GATT-based Profiles and Services. Each of these can be configured for
* either a GATT Client or GATT Server. It generates all the necessary code for a particular Profile/Service operation,
* as configured in the BLE Configurator.
*
***************************************************************************
**\section group_ble_custom_profile Custom Profiles
**
* You can create custom Profiles that use existing Services, and you can create custom Services with
* custom Characteristics and Descriptors.
*
***************************************************************************
**\section group_ble_debug_support Debug Support
**
* For testing and debugging, the PSoC 6 BLE Middleware can be configured to use Host Controller Interface (HCI)
* mode through a UART. Refer to Initialize and Enable PSoC 6 BLE Middleware in Controller-only Mode (HCI over
* Software API).
*
* For over-the-air verification, the Cypress CySmart Central Emulation Tool can be used for generic
* Bluetooth host stack emulation.
*
***************************************************************************
**\section group_ble_architecture PSoC 6 BLE Middleware Architecture
**
* \htmlonly <style>div.image img[src="ble_architecture_single_cpu_mode.png"]{width:650px;}</style> \endhtmlonly
* \htmlonly <style>div.image img[src="ble_architecture_hci_mode.png"]{width:650px;}</style> \endhtmlonly
*
* PSoC 6 BLE Middleware consists of the BLE Stack, BLE Profile, Hardware Abstraction Layer (HAL), and the Link
* Layer. The following figure shows the high-level architecture of the PSoC 6 BLE Middleware, illustrating the
* relationship between each of the layers and how the application interacts with the PSoC 6 BLE Middleware. Note
* that the application uses callback functions to handle BLE events, which you can use to build your state
* machine.
*
* The following block diagram shows the architecture of PSoC 6 BLE Middleware under Complete BLE Protocol mode.
* \image html ble_architecture_single_cpu_mode.png
*
* The following block diagram shows the architecture of PSoC 6 BLE Middleware under Controller Only mode
* (HCI over Software API).
* \image html ble_architecture_hci_mode.png
*
*
* The following sub-sections give an overview of each of these layers.
*
**\subsection group_ble_stack BLE Stack
*
* \htmlonly <style>div.image img[src="ble_stack.png"]{width:550pxpx;}</style> \endhtmlonly
*
* The BLE stack implements the core BLE functionality as defined in Bluetooth Core Specification 5.0. The stack
* is included as a pre-compiled library in the PSoC 6 BLE Middleware library. The BLE Stack implements the layered
* architecture of the BLE protocol stack as shown in the following figure.
*
* \image html ble_stack.png
*
**\subsubsection subsubsection_ble_stack_1 Generic Access Profile (GAP)
* The Generic Access Profile defines the procedures related to discovery of Bluetooth devices and the link-
* management aspects of connecting to Bluetooth devices. In addition, this profile includes common format
* requirements for parameters accessible on the user interface level.
*
* The Generic Access Profile defines the following roles when operating over the LE physical channel:
* - <b>Broadcaster role</b>: A device operating in the Broadcaster role can send advertising events. It is
* referred to as a Broadcaster. It has a transmitter and may have a receiver.
*
* - <b>Observer role</b>: A device operating in the Observer role is a device that receives advertising
* events. It is referred to as an Observer. It has a receiver and may have a transmitter.
*
* - <b>Peripheral role</b>: A device that accepts an LE physical link using any of the connection
* establishment procedures is said to have a Peripheral role. A device operating in the Peripheral
* role will be in the "Slave role" in the Link Layer Connection State. A device operating in the
* Peripheral role is referred to as a Peripheral. A Peripheral has both a transmitter and a receiver.
*
* - <b>Central role</b>: A device that supports the Central role initiates the establishment of a physical
* connection. A device operating in the "Central role" will be in the "Master role" in the Link Layer
* Connection. A device operating in the Central role is referred to as a Central. A Central has a
* transmitter and a receiver.
*
**\subsubsection subsubsection_ble_stack_2 Generic Attribute Profile (GATT)
*
* The Generic Attribute Profile defines a generic service framework using the ATT protocol layer. This
* framework defines the procedures and formats of services and their characteristics. It defines the procedures
* for Service, Characteristic, and Descriptor discovery, reading, writing, notifying, and indicating
* Characteristics, as well as configuring the broadcast of Characteristics. GATT roles are:
*
* - <b>GATT Client</b>: This is the device that wants data. It initiates commands and requests to the GATT
* Server. It can receive responses, indications, and notifications data sent by the GATT Server.
*
* - <b>GATT Server</b>: This is the device that has the data and accepts incoming commands and requests from
* the GATT Client. It sends responses, indications, and notifications to a GATT Client. The BLE Stack
* can support both roles simultaneously.
*
**\subsubsection subsubsection_ble_stack_3 Attribute Protocol (ATT)
*
* The Attribute Protocol layer defines a Client/Server architecture above the BLE logical transport channel.
* The attribute protocol allows a device referred to as the GATT Server to expose a set of attributes and their
* associated values to a peer device referred to as the GATT Client. Attributes exposed by the GATT Server can
* be discovered, read, and written by a GATT Client, and can be indicated and notified by the GATT Server. All
* the transactions on attributes are atomic.
*
**\subsubsection subsubsection_ble_stack_4 Security Manager Protocol (SMP)
*
* The Security Manager Protocol defines the procedures and behavior to manage pairing, authentication, and
* encryption between the devices. These include:
* - Encryption and Authentication
* - Pairing and Bonding
* - Pass Key and Out of Band bonding
* - Key Generation for a device identity resolution, data signing, and encryption
* - Pairing method selection based on the IO capability of the GAP central and GAP peripheral device.
*
**\subsubsection subsubsection_ble_stack_5 Logical Link Control Adaptation Protocol (L2CAP)
*
* L2CAP provides a connectionless data channel. LE L2CAP provides the following features:
* - Channel multiplexing, which manages three fixed channels. Two channels are dedicated for higher protocol
* layers like ATT, SMP. One channel is used by the LE-L2CAP protocol signalling channel for its own use.
*
* - Segmentation and reassembly of packets whose size is up to the BLE Controller managed maximum packet size.
*
* - Connection-oriented channel over a specific application registered using the PSM (protocol service
* multiplexer) channel. It implements credit-based flow control between two LE L2CAP entities. This feature can
* be used for BLE applications that require transferring large chunks of data.
*
**\subsubsection subsubsection_ble_stack_6 Host Controller Interface (HCI)
*
* The HCI layer implements a command, event, and data interface to allow link layer access from upper layers
* such as GAP, L2CAP, and SMP.
*
**\subsubsection subsubsection_ble_stack_7 Link Layer (LL)
*
* The Link Layer implements a command, event, and data interface to allow link layer access from upper layers
* such as GAP, L2CAP, and SMP. The LL protocol manages the physical BLE connections between devices. It
* supports all LL states such as Advertising, Scanning, Initiating, and Connecting (Master and Slave). It
* implements all the key link control procedures such as LE Encryption, LE Connection Update, LE Channel
* Update, and LE Ping.
*
* The Link Layer is a hardware-firmware co-implementation, where the key time critical LL functions are
* implemented in the LL hardware. The LL firmware maintains and controls the key LL procedure state machines.
* It supports all the BLE chip-specific low-power modes. The BLE Stack is a pre-compiled library. The
* appropriate configuration of the BLE Stack library is linked during a build process based on the application.
* The BLE Stack libraries are Arm Embedded Application Binary Interface (EABI) compliant and are compiled using
* Arm compiler version 5.03.
*
**\subsection group_ble_profile_layer Profile Layer
*
* \htmlonly <style>div.image img[src="ble_profiles.png"]{width:1000px;}</style> \endhtmlonly
*
* In BLE, data is organized into concepts called Profiles, Services, and Characteristics.
*
* - A <b>Profile</b> describes how devices connect to each other to find and use Services. The Profile
* describes the type of application and the general expected behavior of that device. See the <b>Parameter
* Configuration</b> section of ModusToolbox Bluetooth Configurator Guide for configuring the PSoC 6 BLE Middleware.
*
* - A <b>Service</b> is a collection of data entities called Characteristics. A Service is used to define a
* certain function in a Profile. A Service may also define its relationship to other Services. A Service is
* assigned a Universally Unique Identifier (UUID). This is 16 bits for SIG adopted Services and 128 bits for
* custom Services. See the <b>GATT Settings Tab</b> section of ModusToolbox Bluetooth Configurator Guide for
* information about adding Services to a Profile.
*
* - A <b>Characteristic</b> contains a Value and the Descriptor that describes a Characteristic Value. It is an
* attribute type for a specific piece of information within a Service. Like a Service, each Characteristic is
* designated with a UUID; 16 bits for SIG adopted Characteristics and 128 bits for custom Characteristics. See
* the <b>GATT Settings Tab</b> section of ModusToolbox Bluetooth Configurator Guide for information about adding
* Characteristics and Descriptors. The following diagram shows the relationship between Profiles, Services, and
* Characteristics in a sample BLE heart rate monitor application using a Heart Rate Profile.
*
* \image html ble_profiles.png
*
* The Heart Rate Profile contains a Heart Rate Service and a Device Information Service. Within the Heart Rate
* Service, there are three Characteristics, each containing different information. The device in the diagram is
* configured in the Sensor role, meaning that in the context of the Heart Rate Profile, the device is a GAP
* Peripheral and a GATT Server. These concepts are explained in the \ref group_ble_stack description.
*
* The Profile layer is provided by PSoC 6 BLE Middleware using the parameter configurations specified in the Bluetooth
* Configurator. The Profile implements the Profile-specific attribute database and functions required for the
* application. You can choose to configure the standard SIG adopted Profile and generate a design, or define a
* Custom Profile required by an application.
*
**\subsection group_ble_hal Hardware Abstraction Layer (HAL)
*
* The HAL implements the interface between the BLE stack and the underlying hardware. This layer is meant for
* the stack only and it is not advisable to modify it.
*
***********************************************************************************************************************
**\page page_ble_quick_start Quick Start Guide
**
* The PSoC 6 BLE Middleware can be used in various software environments such as ModusToolbox, etc.
* Refer to \ref page_ble_toolchain page. The quickest way to get started is using the Code Examples.
* Cypress Semiconductor continuously extends its portfolio of code examples at the [<b>Cypress Semiconductor website</b>]
* (http://www.cypress.com/) and at the [<b>Cypress Semiconductor GitHub</b>](https://github.com/cypresssemiconductor.com)
* site.
*
* You must accomplish several tasks to implement a BLE standard profile application:
* - \ref group_ble_quick_start1
* - \ref group_ble_quick_start2
* - \ref group_ble_quick_start3
* - \ref group_ble_quick_start4
* - \ref group_ble_quick_start5
* - \ref group_ble_quick_start6
*
* The snippets below show an implementation of a simple Bluetooth SIG-defined standard profile called Find [Me
* Profile (FMP)](https://www.bluetooth.org/docman/handlers/downloaddoc.ashx?doc_id=239389). BLE midlleware is
* configured to operate in Complete BLE Protocol Single CPU mode. In this mode,the BLE functionality is
* entirely on the CM4 CPU core. It uses a software interface for communication between the controller and host.
* Refer to \ref page_ble_section_configuration_considerations for details on how to configure the BLE
* middleware for operation in Complete BLE Protocol Dual CPU or Controller-only (HCI over Software API) modes.
*
***************************************************************************
**\section group_ble_quick_start1 PSoC 6 BLE Middleware configuration in BT Configurator
*
* \htmlonly <style>div.image img[src="bt_config_general_tab.jpg"]{width:570px;}</style> \endhtmlonly
* \htmlonly <style>div.image img[src="bt_config_gatt_tab.jpg"]{width:820px;}</style> \endhtmlonly
* \htmlonly <style>div.image img[src="bt_config_gap_tab.jpg"]{width:820px;}</style> \endhtmlonly
* \htmlonly <style>div.image img[src="bt_config_advervicement_packet.jpg"]{width:820px;}</style> \endhtmlonly
* \htmlonly <style>div.image img[src="bt_config_advervicement_setting.jpg"]{width:820px;}</style> \endhtmlonly
* \htmlonly <style>div.image img[src="bt_config_securiti_configuration.jpg"]{width:820px;}</style> \endhtmlonly
*
* The [ModusToolbox BT Configurator Guide] (https://www.cypress.com/ModusToolboxBLEConfig) describes how to use
* BT Configurator. The BT Configurator Tool can be launched in ModusToolbox IDE from the BLE personality, as
* well as in stand-alone mode. Refer to [ModusToolbox Software Environment, Quick Start Guide, Documentation,
* and Videos](https://www.cypress.com/products/modustoolbox-software-environment).
*
* For this Quick Start Guide, the PSoC 6 BLE Middleware is configured as the Find Me Target in the GAP Peripheral role
* with the settings shown in the figures below:
*
* <b>General Settings</b><br>
* Use the General tab for general configuration of the Bluetooth resource (e.g GAP role, max number of BLE
* connection, etc).
* \image html bt_config_general_tab.jpg
*
* <b>GATT Settings</b><br>
* Use the GATT Settings tab to configure Profile-specific parameters. For this Quick Start Guide we add only
* Find Me profile (Find Me Target (GATT Server)).
* \image html bt_config_gatt_tab.jpg
*
* <b>GAP Settings</b><br>
* Use the GAP Settings tab to configure GAP parameters, which define the general connection settings required
* when connecting Bluetooth devices. It contains various parameters based on the item you select in the tree.
*
* <i>General</i><br>
* In this panel you configure general GAP parameters (e.g. Public device address, Device Name, Appearance,
* Adv/Scan/Connections TX power level, etc).
* \image html bt_config_gap_tab.jpg
*
* <i>Advertisement Settings</i><br>
* In this panel you configure the general parameters for advertisement configuration (e.g. Discovery mode,
* Advertising type, Filter policy, Advertising Interval, etc).
* \image html bt_config_advervicement_setting.jpg
*
* <i>Advertisement Packet</i><br>
* In this panel you configure the Advertisement data to be used in device advertisements.
* \image html bt_config_advervicement_packet.jpg
*
* <i>Security Settings</i><br>
* In this panel you configure security settings for the device. The example uses a configuration that does not
* require authentication, encryption, or authorization for data exchange.
* \image html bt_config_securiti_configuration.jpg
*
* PSoC 6 BLE Middleware configuration is saved in files "cycfg_ble.h" and "cycfg_ble.c".
* These files must be attached to the user project.
*
***************************************************************************
**\section group_ble_quick_start2 System and PSoC 6 BLE Middleware Initialization
*
* When PSoC 6 BLE MCU is reset, the application should perform system initialization which includes: setting up
* the CPU cores for execution, enabling global interrupts, and enabling other components used in the design (
* UART, MCWDT, etc). After the CPUs are initialized the application initializes the PSoC 6 BLE Middleware, which sets
* up a complete BLE subsystem.
*
* As part of the PSoC 6 BLE Middleware initialization, you must:
* - Initialize the BLESS interrupt. See \ref group_ble_section_conf_cons_intr for detailed information. The
* code below shows how to implement the routine (ISR) handler of the BLESS interrupt service (refer to
* BlessInterrupt() function). The Cy_BLE_BlessIsrHandler() function is called from BlessInterrupt() to process
* interrupt events generated by BLESS.
* - Register the generic event handler function to be called by the BLE stack to notify of pending events.
* Refer to Cy_BLE_RegisterEventCallback() function.
* - Call Cy_BLE_Init() to initialize PSoC 6 BLE Middleware. Pass the address of the configuration structure generated
* by the BT Configurator, cy_ble_config (exposed in cycfg_ble.c).
* - Call Cy_BLE_Enable() to enable the BLE subsystem.
* - Register service-specific event handlers (the example uses only the IAS event handler to handle Immediate
* Alert Service related events). Refer to Cy_BLE_IAS_RegisterAttrCallback() function.
*
* \snippet ble/sut_quick_start_guide/main.c BLE Quick Start Guide: System and PSoC 6 BLE Middleware Initialization
*
***************************************************************************
**\section group_ble_quick_start3 Main Loop Implementation
* The main loop in the example has a simply flow:
* - process the BLE stack pending events by a call to Cy_BLE_ProcessEvents()
* - process a received alert level: updates the LEDs based on the alert level
* - restarts the BLE stack timer to get a 1-second interval to blink the LED
* - the application goes into Low-power mode by call to the LowPowerImplementation() function.
*
* \snippet ble/sut_quick_start_guide/main.c BLE Quick Start Guide: Main Loop Implementation
*
***************************************************************************
**\section group_ble_quick_start4 Stack Event Handler
*
* The BLE stack within the PSoC 6 BLE Middleware generates events. These events provide status and data to the
* application firmware through the BLE stack event handler.
*
* The event handler must handle a few basic events from the stack. For the Find Me Target application in this
* code example, the BLE stack event-handler must process the events described in table below. The actual code
* recognizes and responds to additional events.
*
* | BLE Stack Event Name | Event Description | Event Handler Action
* | :--- | :--- |:--- |
* | CY_BLE_EVT_STACK_ON | BLE stack initialization is completed successfully | Start advertisement and reflect the advertisement state on the LED
* | CY_BLE_EVT_GAP_DEVICE_DISCONNECTED | BLE link with the peer device is disconnected | Restart advertisement and reflect the advertisement state on the LED
* | CY_BLE_EVT_GAP_DEVICE_CONNECTED | BLE link with the peer device is established | Update the BLE link state on the LED
* | CY_BLE_EVT_GAPP_ADVERTISEMENT_START_STOP | BLE stack advertisement start/stop event | Shutdown the BLE stack
* | CY_BLE_EVT_STACK_SHUTDOWN_COMPLETE | BLE stack has been shutdown | Put the device into Hibernate mode
* | CY_BLE_EVT_GAP_AUTH_REQ | BLE authentication request received | Call Cy_BLE_GAPP_AuthReqReply() to reply to the authentication request from Central
*
* The code snippets show examples of how the event handler responds to an identified events. See the actual
* source code for a complete understanding.
*
* \code
* /*******************************************************************************
* * Function Name: AppCallBack
* ********************************************************************************
* * Summary: This is an event callback function to receive events from the PSoC 6 BLE Middleware.
* *
* * Parameters:
* * event - The event code.
* * eventParam - The event parameters.
* *
* *******************************************************************************/
* void AppCallBack(uint32_t event, void *eventParam)
* {
* switch(event)
* {
* /* Generic events (e.g CY_BLE_EVT_STACK_ON, CY_BLE_EVT_STACK_BUSY_STATUS, etc) */
* . . .
*
* /* GAP Events (e.g CY_BLE_EVT_GAP_AUTH_REQ, CY_BLE_EVT_GAP_AUTH_COMPLETE, CY_BLE_EVT_GAP_DEVICE_CONNECTED, etc) */
* . . .
*
* /* GATT Events (e.g CY_BLE_EVT_GATT_CONNECT_IND, CY_BLE_EVT_GATT_DISCONNECT_IND, etc) */
* . . .
*
* /* Other Events */
* . . .
* }
* }
* \endcode
*
* In this snippet, the handler starts advertising in response to the CY_BLE_EVT_STACK_ON event.
* \snippet ble/sut_quick_start_guide/main.c BLE Quick Start Guide: CY_BLE_EVT_STACK_ON
*
* In this snippet, the handler responds to the "advertisement start/stop" event. The code toggles the LEDs
* appropriately. If advertising has started, the advertisement LED turns on. The disconnect LED turns off,
* because the device started advertising and is ready for connection. If advertising stops, the code sets the
* LEDs appropriately, and sets a flag to enter Hibernate mode.
* \snippet ble/sut_quick_start_guide/main.c BLE Quick Start Guide: CY_BLE_EVT_GAPP_ADVERTISEMENT_START_STOP
*
* In this snippet, the handler responds to the "disconnected" event. It starts advertising and sets the
* LEDs correctly.
* \snippet ble/sut_quick_start_guide/main.c BLE Quick Start Guide: CY_BLE_EVT_GAP_DEVICE_DISCONNECTED
*
* In this snippet, the handler receives a timeout from BLE stack timer. In this example the BLE stack timer is
* used to get a 1-second interval to blink the LED.
* \snippet ble/sut_quick_start_guide/main.c BLE Quick Start Guide: CY_BLE_EVT_TIMEOUT
*
* In this snippet, the handler puts the device into Hibernate mode in response to the
* CY_BLE_EVT_STACK_SHUTDOWN_COMPLETE event.
* \snippet ble/sut_quick_start_guide/main.c BLE Quick Start Guide: CY_BLE_EVT_STACK_SHUTDOWN_COMPLETE
*
* In this snippet, the handler responds to the authentication request from the Central device. The peripheral
* device must call Cy_BLE_GAPP_AuthReqReply() to reply to the authentication request from the Central.
* \snippet ble/sut_quick_start_guide/main.c BLE Quick Start Guide: CY_BLE_EVT_GAP_AUTH_REQ
*
***************************************************************************
**\section group_ble_quick_start5 Service-specific Event Handler
*
* The PSoC 6 BLE Middleware also generates events corresponding to each of the services supported by the design. For
* the Find Me Target application, the PSoC 6 BLE Middleware generates IAS events that let the application know that
* the Alert Level characteristic has been updated with a new value. The event handler gets the new value and
* stores it in the variable alertLevel. The main loop toggles the alert LED based on the current alert level.
*
* The code snippet shows how the firmware accomplishes this task.
* \snippet ble/sut_quick_start_guide/main.c BLE Quick Start Guide: IAS Event Handler
*
***************************************************************************
**\section group_ble_quick_start6 Implement Low-power Performance
*
* In the application process, the CPU processes the pending BLE events. If there are no events pending, the CPU
* enters the deep sleep power mode.
* \snippet ble/sut_quick_start_guide/main.c BLE Quick Start Guide: Low Power Implementation
*
*
***********************************************************************************************************************
**\page page_ble_section_configuration_considerations Configuration Considerations
**
* \htmlonly <style>div.image img[src="ble_config_common_flow.png"]{width:800px; align:left;}</style> \endhtmlonly
*
* This section explains how to configure the Bluetooth Low Energy (BLE) middleware for operation in either:
* 1. Complete BLE Protocol Single and Dual CPU modes
* 2. Controller-only mode (HCI over Software API)
*
* The following figure shows the common flow for PSoC 6 BLE Middleware configuration:
* \image html ble_config_common_flow.png
*
* Refer to the following sections for BLE configuration details:
* - \ref group_ble_section_conf_cons_gui
* - \ref group_ble_section_conf_cons_prebuild
* - \ref group_ble_subsection_conf_cons_libraries
* - \ref group_ble_subsection_conf_cons_precompiled
* - \ref group_ble_section_conf_cons_intr
* - \ref group_ble_section_conf_cons_init_enable
* - \ref group_ble_subsection_conf_cons_single
* - \ref group_ble_subsection_conf_cons_dual
* - \ref group_ble_section_conf_cons_init_enable_hci
* - \ref group_ble_section_conf_cons_ota_share_code
*
***************************************************************************
**\section group_ble_section_conf_cons_gui Generate Configuration in the BT Configurator
*
* 1. Run the stand-alone BT Configurator to configure the BLE design.
* 2. After configuring the BLE General, GAP, GATT, and Link layer settings, save the generated source
* and header files.
* 3. Add these files to your application.
*
* The generated files contain the BLE configuration structure, cy_ble_config (type of cy_stc_ble_config_t ),
* and a set of macros that can be used in the application. Refer to [ModusToolbox BT Configurator Tool Guide]
* (https://www.cypress.com/ModusToolboxBLEConfig).
*
***************************************************************************
**\section group_ble_section_conf_cons_prebuild BLE Stack Components and CM0+ Pre-built Images
*
*
* The BLE stack components and the pre-compiled image for the CM0+ BLE Sub-system (BLESS) controller are parts
* of the PSoC 6 BLE Middleware that include different variants of pre-built BLE stack libraries.
*
* The user may specify the BLE stack components and CM0+ pre-built image via the COMPONENTS variable in the
* application level Makefile. The following table describes all the BLE stack components, pre-built images, and
* the relationship between them in different BLE operating modes:
*
* <table class="doxtable" width="90%" border="1" align="center" cellpadding="3" cellspacing="0"
* style="width: 100%; font-size: 14px;">
* <tr bgcolor="#D7EFEE">
* <td rowspan="3" valign="center" style="text-align: center;">
* <b>Components</b>
* (libraries / pre-built images)
* </td>
* <td rowspan="3" valign="center" style="text-align: center; font-weight: bold;">
* Description
* </td>
* <td colspan="3" align="center" style="text-align: center; font-weight: bold;">
* BLE Operation Modes
* </td>
* </tr>
* <tr bgcolor="#D7EFEE">
* <td colspan="2" style="text-align: center;">
* Complete BLE Protocol</td>
* <td rowspan="2" valign="center" nowrap="nowrap" style="text-align: center;">
* BLE HCI
* (over Software API)
* </td>
* </tr>
* <tr bgcolor="#D7EFEE">
* <td valign="center" nowrap="nowrap" style="text-align: center;">
* BLE Dual CPU Mode
* (Host part)
* </td>
* <td valign="center" nowrap="nowrap" style="text-align: center;">
* BLE Single CPU Mode
* </td>
* </tr>
* <tr>
* <td colspan="1">BLESS_HOST_IPC</td>
* <td colspan="1">
* BLE stack host (over IPC) pre-built libraries that run on the CM4 core in BLE Dual CPU
* mode. Must be complemented with the CM0+ BLESS controller pre-compiled image (CM0P_BLESS).
* There are soft FP and hard FP variants.
* </td>
* <td colspan="1" style="text-align: center;"><strong>Y</strong></td>
* <td> </td>
* <td> </td>
* </tr>
* <tr>
* <td colspan="1">BLESS_HOST</td>
* <td colspan="1">
* BLE stack host (over software transport interface) pre-built libraries that run on the
* CM4 core in BLE Single CPU mode. Must be complemented with the BLE Stack controller (over
* software transport interface) component (BLESS CONTROLLER). There are soft FP and hard FP
* variants.
* </td>
* <td> </td>
* <td colspan="1" style="text-align: center;"><strong>Y</strong></td>
* <td> </td>
* </tr>
* <tr>
* <td colspan="1">BLESS_CONTROLLER</td>
* <td colspan="1">
* BLE stack controller (over software transport interface) pre-built libraries that run on
* the CM4 core in BLE Single CPU or Host Controller Interface (HCI) modes. There are soft
* FP and hard FP variants.
* </td>
* <td> </td>
* <td colspan="1" style="text-align: center;"><strong>Y</strong></td>
* <td colspan="1" style="text-align: center;"><strong>Y</strong></td>
* </tr>
* <tr bgcolor="#F4F4EF">
* <td colspan="1">CM0P_BLESS</td>
* <td colspan="1">
* This image has the BLE controller implementation. It starts the CM4 core at
* CY_CORTEX_M4_APPL_ADDR=0x10020000. It then goes into a while loop where it processes BLE
* controller events and puts the CM0+ core into CPU deep sleep.
* </td>
* <td colspan="1" style="text-align: center;"><strong>Y</strong></td>
* <td> </td>
* <td> </td>
* </tr>
* <tr bgcolor="#F4F4EF">
* <td colspan="1">CM0P_SLEEP</td>
* <td colspan="1">
* This image starts the CM4 core at CY_CORTEX_M4_APPL_ADDR=0x10002000 and puts the CM0+
* core into CPU deep sleep.
* </td>
* <td> </td>
* <td colspan="1" style="text-align: center;"><strong>(Y)</strong></td>
* <td colspan="1" style="text-align: center;"><strong>(Y)</strong></td>
* </tr>
* <tr bgcolor="#F4F4EF">
* <td colspan="1">Other CM0+ images</td>
* <td colspan="1">
* Pre-compiled application images executed on the Cortex M0+ core of the PSoC 6 Dual-core
* MCU. The images are provided as C arrays ready to be compiled as part of the Cortex M4
* application. The Cortex M0+ application code is placed in internal flash by the Cortex M4
* linker script.
* </td>
* <td> </td>
* <td colspan="1" style="text-align: center;"><strong>(Y)</strong></td>
* <td colspan="1" style="text-align: center;"><strong>(Y)</strong></td>
* </tr>
* </table>
*
* The following fragments of the application level Makefile show how to enable different BLE modes.
* <table class="doxtable" width="90%" border="1" align="center" cellpadding="3" cellspacing="0" style="width: 100%; font-size: 14px;">
* <tr bgcolor="#D7EFEE" >
* <td style="text-align: center; font-weight: bold;">Dual CPU mode</td>
* <td style="text-align: center; font-weight: bold;">Single CPU mode</td>
* <td style="text-align: center; font-weight: bold;">HCI mode</td>
* </tr>
* <tr bgcolor="#FFFFFF" valign="top">
* <td>APPNAME=BLE_APP_DUAL_CORE<br>
* COMPONENTS=BLESS_HOST_IPC CM0_BLESS<br>
* </td>
* <td>APPNAME=BLE_APP_SINGLE_CORE<br>
* COMPONENTS=BLESS_HOST BLESS_CONTROLLER<br>
* </td>
* <td>APPNAME=BLE_HCI_APP<br>
* COMPONENTS=BLESS_CONTROLLER<br>
* </td>
* </tr>
* </table>
*
* \note CM0_BLESS - is a pre-built image with BLESS controller<br>
*
**\subsection group_ble_subsection_conf_cons_libraries BLE Stack Libraries
*
* The BLE stack libraries are compliant with the Arm Embedded Application Binary Interface
* (EABI). They are compiled with the Arm compiler version 5.03. The following table shows
* the mapping between the BLE stack libraries and the user-configured COMPONENT:
*
* <table class="doxtable" width="90%" border="1" align="center" cellpadding="3" cellspacing="0" style="width: 100%; font-size: 14px;">
* <tr bgcolor="#D7EFEE" style="text-align: center; font-weight: bold;">
* <td>COMPONENT Name</td>
* <td>Library Name/Path in PSoC 6 BLE Middleware</td>
* <td>Used for Toolchains (WCHAR)</td>
* <td>SOFT/HARD Floating Point</td>
* </tr>
* <tr>
* <td rowspan="6" align="center">BLESS_HOST_IPC</td>
* <td>COMPONENT_BLESS_HOST_IPC/COMPONENT_SOFTFP/TOOLCHAIN_GCC_ARM/cy_ble_stack_host.a</td>
* <td rowspan="2" align="center">GCC (WCHAR 32)</td>
* <td align="center">SOFTFP</td>
* </tr>
* <tr>
* <td>COMPONENT_BLESS_HOST_IPC/COMPONENT_HARDFP/TOOLCHAIN_GCC_ARM/cy_ble_stack_host.a</td>
* <td align="center">HARDFP</td>
* </tr>
* <tr>
* <td>COMPONENT_BLESS_HOST_IPC/COMPONENT_SOFTFP/TOOLCHAIN_IAR/cy_ble_stack_host.a</td>
* <td rowspan="2" align="center">IAR (WCHAR 32)</td>
* <td align="center">SOFTFP</td>
* </tr>
* <tr>
* <td>COMPONENT_BLESS_HOST_IPC/COMPONENT_HARDFP/TOOLCHAIN_IAR/cy_ble_stack_host.a</td>
* <td align="center">HARDFP</td>
* </tr>
* <tr>
* <td>COMPONENT_BLESS_HOST_IPC/COMPONENT_SOFTFP/TOOLCHAIN_ARM/cy_ble_stack_host.ar</td>
* <td rowspan="2" align="center">Arm Compiler 6 (WCHAR 16)</td>
* <td align="center">SOFTFP</td>
* </tr>
* <tr>
* <td>COMPONENT_BLESS_HOST_IPC/COMPONENT_HARDFP/TOOLCHAIN_ARM/cy_ble_stack_host.ar</td>
* <td align="center">HARDFP</td>
* </tr>
* <tr>
* <td rowspan="6" align="center">BLESS_HOST</td>
* <td>COMPONENT_BLESS_HOST/COMPONENT_SOFTFP/TOOLCHAIN_GCC_ARM/cy_ble_stack_host.a</td>
* <td rowspan="2" align="center">GCC (WCHAR 32)</td>
* <td align="center">SOFTFP</td>
* </tr>
* <tr>
* <td>COMPONENT_BLESS_HOST/COMPONENT_HARDFP/TOOLCHAIN_GCC_ARM/ cy_ble_stack_host.a</td>
* <td align="center">HARDFP</td>
* </tr>
* <tr>
* <td>COMPONENT_BLESS_HOST/COMPONENT_SOFTFP/TOOLCHAIN_IAR/ cy_ble_stack_host.a</td>
* <td rowspan="2" align="center">IAR (WCHAR 32)</td>
* <td align="center">SOFTFP</td>
* </tr>
* <tr>
* <td>COMPONENT_BLESS_HOST/COMPONENT_HARDFP/TOOLCHAIN_IAR/cy_ble_stack_host.a</td>
* <td align="center">HARDFP</td>
* </tr>
* <tr>
* <td>COMPONENT_BLESS_HOST/COMPONENT_SOFTFP/TOOLCHAIN_ARM/cy_ble_stack_host.ar</td>
* <td rowspan="2" align="center">Arm Compiler 6 (WCHAR 16)</td>
* <td align="center">SOFTFP</td>
* </tr>
* <tr>
* <td>COMPONENT_BLESS_HOST/COMPONENT_HARDFP/TOOLCHAIN_ARM/cy_ble_stack_host.ar</td>
* <td align="center">HARDFP</td>
* </tr>
* <tr>
* <td rowspan="12" align="center">BLESS_CONTROLLER</td>
* <td>COMPONENT_BLESS_CONTROLLER/COMPONENT_SOFTFP/TOOLCHAIN_GCC_ARM/cy_ble_stack_controller.a</td>
* <td rowspan="4" align="center">GCC (WCHAR 32)</td>
* <td rowspan="2" align="center">SOFTFP</td>
* </tr>
* <tr>
* <td>COMPONENT_BLESS_CONTROLLER/COMPONENT_SOFTFP/TOOLCHAIN_GCC_ARM/cy_ble_stack_manager.a</td>
* </tr>
* <tr>
* <td>COMPONENT_BLESS_CONTROLLER/COMPONENT_HARDFP/TOOLCHAIN_GCC_ARM/cy_ble_stack_controller.a</td>
* <td rowspan="2" align="center">HARDFP</td>
* </tr>
* <tr>
* <td>COMPONENT_BLESS_CONTROLLER/COMPONENT_HARDFP/TOOLCHAIN_GCC_ARM/cy_ble_stack_manager.a</td>
* </tr>
* <tr>
* <td>COMPONENT_BLESS_CONTROLLER/COMPONENT_SOFTFP/TOOLCHAIN_IAR/cy_ble_stack_controller.a</td>
* <td rowspan="4" align="center">IAR (WCHAR 32)</td>
* <td rowspan="2" align="center">SOFTFP</td>
* </tr>
* <tr>
* <td>COMPONENT_BLESS_CONTROLLER/COMPONENT_SOFTFP/TOOLCHAIN_IAR/cy_ble_stack_manager.a</td>
* </tr>
* <tr>
* <td>COMPONENT_BLESS_CONTROLLER/COMPONENT_HARDFP/TOOLCHAIN_IAR/cy_ble_stack_controller.a</td>
* <td rowspan="2" align="center">HARDFP</td>
* </tr>
* <tr>
* <td>COMPONENT_BLESS_CONTROLLER/COMPONENT_HARDFP/TOOLCHAIN_IAR/cy_ble_stack_manager.a</td>
* </tr>
* <tr>
* <td>COMPONENT_BLESS_CONTROLLER/COMPONENT_SOFTFP/TOOLCHAIN_ARM/cy_ble_stack_controller.ar</td>
* <td rowspan="4" align="center">Arm Compiler 6 (WCHAR 16)</td>
* <td rowspan="2" align="center">SOFTFP</td>
* </tr>
* <tr>
* <td>COMPONENT_BLESS_CONTROLLER/COMPONENT_SOFTFP/TOOLCHAIN_ARM/cy_ble_stack_manager.ar</td>
* </tr>
* <tr>
* <td>COMPONENT_BLESS_CONTROLLER/COMPONENT_HARDFP/TOOLCHAIN_ARM/cy_ble_stack_controller.ar</td>
* <td rowspan="2" align="center">HARDFP</td>
* </tr>
* <tr>
* <td>COMPONENT_BLESS_CONTROLLER/COMPONENT_HARDFP/TOOLCHAIN_ARM/cy_ble_stack_manager.ar</td>
* </tr>
* </table>
*
**\subsection group_ble_subsection_conf_cons_precompiled CM0+ BLESS Controller Pre-compiled Image
*
* Pre-compiled BLESS controller image executed on the Cortex M0+ core of the PSoC 6 dual- core MCU. The image
* is provided as C arrays ready to be compiled as part of the Cortex M4 application. The Cortex M0+ application
* code is placed in internal flash by the Cortex M4 linker script. This image is used only in BLE Dual CPU
* mode. In this mode, the BLE functionality is split between CM0+ (controller) and CM4 (host). It uses IPC for
* communication between two CPU cores where both the controller and host run.
*
* A BLESS controller pre-built image executes the following steps:
*
* - configures a BLESS interrupt
* - registers an IPC-pipe callback for the PSoC 6 BLE Middleware to initialize and enable the BLE controller when
* the PSoC 6 BLE Middleware operates in BLE Dual CPU mode
* - starts the CM4 core at CY_CORTEX_M4_APPL_ADDR=0x10020000
* - goes into a while loop where it processes BLE controller events and puts the CM0+ core into CPU deep sleep.
*
* To use this image, update the ram, flash, and FLASH_CM0P_SIZE values in the linker script for CM4:
*
* Example for the GCC compiler:
* \code
* ...
* MEMORY
* {
* ...
* ram (rwx) : ORIGIN = 0x08003000, LENGTH = 0x044800
* flash (rx) : ORIGIN = 0x10000000, LENGTH = 0x100000
* ...
* }
* ...
* /* The size and start addresses of the Cortex-M0+ application image */
* FLASH_CM0P_SIZE = 0x20000;
* ...
* \endcode
*
* Example for the IAR compiler:
* \code
* ...
* /* RAM */
* define symbol __ICFEDIT_region_IRAM1_start__ = 0x08003000;
* define symbol __ICFEDIT_region_IRAM1_end__ = 0x08047800;
* /* Flash */
* define symbol __ICFEDIT_region_IROM1_start__ = 0x10000000;
* define symbol __ICFEDIT_region_IROM1_end__ = 0x10100000;
* ...
* /* The size and start addresses of the Cortex-M0+ application image */
* define symbol FLASH_CM0P_SIZE = 0x20000;
* ...
* \endcode
*
* Example for the IAR compiler:
* \code
* ...
* ; RAM
* #define RAM_START 0x08003000
* #define RAM_SIZE 0x00044800
* ; Flash
* #define FLASH_START 0x10000000
* #define FLASH_SIZE 0x00100000
* ...
* /* The size and start addresses of the Cortex-M0+ application image */
* #define FLASH_CM0P_SIZE 0x20000
* ...
* \endcode
*
***************************************************************************
*\section group_ble_section_conf_cons_intr Configure BLESS Interrupt
**
* The interrupt is mandatory for PSoC 6 BLE Middleware operation. The BLESS hardware block provides interrupt sources.
* To configure interrupts, the Cy_BLE_BlessIsrHandler() function is called in the interrupt handler to process
* interrupt events generated by BLESS.
*
* The BLESS interrupt is configured on the core where the BLE controller is running. The following table shows
* details of interrupt configuration depending on the BLE core modes.
*
* <table class="doxtable" width="90%" border="1" align="center" cellpadding="3" cellspacing="0" style="width: 100%; font-size: 14px;">
* <tr bgcolor="#D7EFEE" >
* <td style="text-align: center; font-weight: bold;">BLE Core mode</td>
* <td style="text-align: center; font-weight: bold;">BLE Controller core</td>
* <td style="text-align: center; font-weight: bold;">BLESS Interrupt configuration</td>
* </tr>
* <tr bgcolor="#FFFFFF" valign="top">
* <td style="text-align: center;">Dual CPU mode</td>
* <td style="text-align: center;">CM0+</td>
* <td> The BLESS interrupt is configured in the CM0+ BLESS controller pre-built image.</td>
* </tr>
* <tr bgcolor="#FFFFFF">
* <td valign="center" style="text-align: center;">Single CPU mode</td>
* <td valign="center" style="text-align: center;">CM4</td>
* <td>
* cy_stc_sysint_t blessIsrCfg = <br>
* { <br>&nbsp; &nbsp; &nbsp; &nbsp;
* // The BLESS interrupt <br>&nbsp; &nbsp; &nbsp; &nbsp;
* .intrSrc = bless_interrupt_IRQn, <br>&nbsp; &nbsp; &nbsp; &nbsp;
* <br>&nbsp; &nbsp; &nbsp; &nbsp;
* // The interrupt priority number <br>&nbsp; &nbsp; &nbsp; &nbsp;
* .intrPriority = 1u <br>
* };<br>
* <b>Note.</b> Priority level (intrPriority ) must have the highest value in system.</td>
* </tr>
* </table>
*
* The following code shows how to implement the ISR handler for the BLESS interrupt service. The
* Cy_BLE_BlessIsrHandler() function is called from BLESS ISR to process interrupt events generated by BLESS:
* \snippet ble/snippet/main.c usage Cy_BLE_BlessIsrHandler
*
* Finally, the BLESS interrupt is configured and interrupt handler routines are hooked up to NVIC. The pointer
* to the BLESS interrupt configuration structure (blessIsrCfg) is stored in the BLE configuration structure (
* cy_ble_config):
* \snippet ble/snippet/main.c BLESS interrupt configure
*
****************************************************************************
**\section group_ble_section_conf_cons_init_enable Initialize and Enable PSoC 6 BLE Middleware in Complete BLE Protocol Mode
*
* \htmlonly <style>div.image img[src="ble_config_single_mode.png"]{width:864px; align:left;}</style> \endhtmlonly
*
**\subsection group_ble_subsection_conf_cons_single Complete BLE Protocol Single CPU mode
*
* In this mode, the BLE functionality is entirely on the CM4 CPU core. It uses a software interface for
* communication between the controller and host. The following figure shows the configuration flow for the BLE
* middleware in Single CPU mode.
*
* \image html ble_config_single_mode.png
*
* 1. Generate configuration in the BT Configurator, refer to
* [ModusToolbox BT Configurator Tool Guide](https://www.cypress.com/ModusToolboxBLEConfig)
* 2. Specify the following BLE Stack Component and CM0+ Pre-built:
* - BLESS_HOST,
* - BLESS_CONTROLLER,
* - CM0P_SLEEP or other CM0+ image (e.g. CM0P_CRYPTO, etc).<br>
* Refer to section \ref group_ble_section_conf_cons_prebuild for detailed information.
* 3. Initialize the BLESS interrupt as shown in section \ref group_ble_section_conf_cons_intr.
* 4. Initialize and enable the PSoC 6 BLE Middleware in the application code:
* <ol type="a">
* <li>Call the Cy_BLE_RegisterEventCallback() function to register the generic callback function. The callback
* function is of type cy_ble_callback_t, as defined by: void (*cy_ble_callback_t)(uint32_t eventCode, void
* *eventParam).</li>
* <li>Call Cy_BLE_Init(&cy_ble_config), where cy_ble_config is the configuration structure exposed in cycfg_ble.c
* (generated by the BT Configurator).</li>
* <li>Call Cy_BLE_Enable() to enable the BLE host and controller.</li>
* <li>Optionally, to enable BLE low-power mode, call the Cy_BLE_EnableLowPowerMode() function.</li>
* <li>Register the service-specific callback functions to be used. For example, use Cy_BLE_IAS_RegisterAttrCallback(
* IasEventHandler) to register service-specific callback function IasEventHandler for the Immediate Alert
* service. This function is also of type cy_ble_callback_t and is passed as a parameter to the service-specific
* callback registration function. The callback function is used to evaluate service-specific events and to take
* the appropriate action as defined by your application. Then, build a service-specific state machine using
* these events.</li>
* </ol>
*
**\subsection group_ble_subsection_conf_cons_dual Complete BLE Protocol Dual CPU Mode
*
* \htmlonly <style>div.image img[src="ble_config_dual_mode.png"]{width:864px; align:left;}</style> \endhtmlonly
*
* In this mode, the BLE functionality is split between the CM0+ (controller) and CM4 (host) CPU cores. The
* controller part is implemented in BLESS controller CM0+ pre-built image. It uses IPC for communication
* between the two CPU cores that run the controller and host.The following figure shows the configuration flow
* for the PSoC 6 BLE Middleware in Dual CPU mode:
*
* \image html ble_config_dual_mode.png
*
* 1. Generate configuration in the BT Configurator, refer to
* [ModusToolbox BT Configurator Tool Guide](https://www.cypress.com/ModusToolboxBLEConfig)
* 2. Specify the following BLE Stack Component and CM0+ Pre-built:
* - BLESS_HOST_IPC,
* - CM0P_BLESS.<br>
* Refer to section \ref group_ble_section_conf_cons_prebuild for detailed information.
* 3. The BLESS interrupt is initialized in the CM0+ BLESS controller pre-built image, so you don't need to do this.
* 4. Initialize and enable the PSoC 6 BLE Middleware in the application code:
* <ol type="a">
* <li>Call the Cy_BLE_RegisterEventCallback() function to register the generic callback function. The callback
* function is of type cy_ble_callback_t, as defined by: void (*cy_ble_callback_t)(uint32_t eventCode, void
* *eventParam).</li>
* <li>Call Cy_BLE_Init(&cy_ble_config), where cy_ble_config is the configuration structure exposed in cycfg_ble.c
* (generated by the BT Configurator).</li>
* <li>Call Cy_BLE_Enable() to enable the BLE host and controller.</li>
* <li>Optionally, to enable BLE low-power mode, call the Cy_BLE_EnableLowPowerMode() function.</li>
* <li>Register the service-specific callback functions to be used. For example, use Cy_BLE_IAS_RegisterAttrCallback(
* IasEventHandler) to register service-specific callback function IasEventHandler for the Immediate Alert
* service. This function is also of type cy_ble_callback_t and is passed as a parameter to the service-specific
* callback registration function. The callback function is used to evaluate service-specific events and to take
* the appropriate action as defined by your application. Then, build a service-specific state machine using
* these events.</li>
* </ol>
*
* The following code snippet shows the BLE initialization:
* \code
* void main(void)
* {
* /* ... Initializes the BLE interrupt (skipped in this code snippet) ...*/
*
* /* Registers the generic callback functions */
* Cy_BLE_RegisterEventCallback(AppCallBack);
*
* /* Initializes the BLE host */
* Cy_BLE_Init(&cy_ble_config);
*
* /* Enables BLE Low-power mode (LPM)*/
* Cy_BLE_EnableLowPowerMode();
*
* /* Enables BLE */
* Cy_BLE_Enable();
*
* /* Registers the service-specific callback functions (e.g. IAS) */
* Cy_BLE_IAS_RegisterAttrCallback(IasEventHandler);
*
* for (;;)
* {
* /* Cy_BLE_ProcessEvents() allows the BLE stack to process pending events */
* Cy_BLE_ProcessEvents();
*
* /* The main BLE application loop ... */
* }
* }
* \endcode
*
*
**\section group_ble_section_conf_cons_init_enable_hci Initialize and Enable PSoC 6 BLE Middleware in Controller-only Mode (HCI over Software API)
*
* \htmlonly <style>div.image img[src="ble_config_controller_only_mode.png"]{width:864px; align:left;}</style> \endhtmlonly
* \image html ble_config_controller_only_mode.png
*
* 1. In the BT Configurator, select the option BLE Controller-only (HCI) in the General Tab and generate
* configuration., refer to [ModusToolbox BT Configurator Tool Guide](https://www.cypress.com/ModusToolboxBLEConfig)
* 2. Specify the following BLE Stack Component and CM0+ Pre-built:
* - BLESS_CONTROLLER,
* - CM0P_SLEEP or other CM0+ image (e.g. CM0P_CRYPTO, etc).<br>
* Refer to section \ref group_ble_section_conf_cons_prebuild for detailed information.
* 3. Initialize the BLESS interrupt as shown in section \ref group_ble_section_conf_cons_intr.
* 4. Initialize and enable the PSoC 6 BLE Middleware in the application code:
* <ol type="a">
* <li>Call Cy_BLE_RegisterEventCallback(StackEventHandler) to register an event callback function to
* receive events from the BLE controller.</li>
* <li>Call Cy_BLE_Init(&cy_ble_config) where cy_ble_config is the configuration structure exposed in
* cycfg_ble.c (generated by the BLE Configurator).</li>
* <li>Call Cy_BLE_Enable() to enable the BLE controller.</li>
* </ol>
*
* <i>Send an HCI packet to the BLE stack controller</i><br>
* Use the Cy_BLE_SoftHciSendAppPkt() function to send an HCI packet to the BLE stack controller. The
* application allocates memory for the buffer to hold the HCI packet passed as an input parameter. This
* function copies the HCI packet into the controller's HCI buffer. Hence, the application may deallocate the
* memory buffer created to hold the HCI packet, once the API returns.
*
* <i>Receive an HCI event (or ACL packet) from BLE stack controller</i><br>
* Use the Cy_BLE_SoftHciSendAppPkt() function to send an HCI packet to the BLE stack controller. The
* application allocates memory for the buffer to hold the HCI packet passed as an input parameter. This
* function copies the HCI packet into the controller's HCI buffer. Hence, the application may deallocate the
* memory buffer created to hold the HCI packet, once the API returns.
*
*
**\section group_ble_section_conf_cons_ota_share_code Over-The-Air Bootloading with Code Sharing
*
* This feature is used in the over-the-air (OTA) implementation. It allows sharing BLE component code between
* two component instances: one instance with profile-specific code and one with a stack. To configure OTA with
* code sharing, define CY_BLE_SHARING_MODE in the project. This parameter allows choosing between the following
* options:
*
* <table class="doxtable">
* <tr align="center">
* <th>Option</th>
* <th>Value</th>
* <th>Description</th>
* </tr>
* <tr>
* <td align="center">Disabled</td>
* <td align="center">0</td>
* <td>OTA with code sharing feature is disabled.</td>
* </tr>
* <tr>
* <td align="center">Stack and Profiles</td>
* <td align="center">1</td>
* <td>This option is used to isolate the stack and the application Profiles.<br>
* Dynamically allocate memory for the BLE stack and pass the pointer to the memory heap into
* BLE config structure (cy_ble_config.stackParam->memoryHeapPtr).
* The PSoC 6 BLE Middleware provides macro CY_BLE_STACK_RAM_SIZE which defines the ram size.
*
* The following code snippet shows how to dynamically allocate memory for BLE stack:<br>
* // Allocate memory for BLE stack <br>
* cy_ble_config.stackParam->memoryHeapPtr = (uint8 *)malloc(CY_BLE_STACK_RAM_SIZE);<br>
* <br>
* if(cy_ble_config.stackParam->memoryHeapPtr == NULL)<br>
* {<br>&nbsp;&nbsp;&nbsp;&nbsp;
* Cy_SysLib_Halt(0x00u);<br>
* }<br>
* <b>Note</b> This mode requires approximately 3024 additional bytes of heap memory.
* If there is not enough heap memory, the PSoC 6 BLE Middleware will not work. The Heap size can
* be modified by editing linker scripts.
* </td>
* </tr>
* <tr>
* <td align="center">Profile only</td>
* <td align="center">2</td>
* <td>This option makes the middleware only have the profile-specific code. Stack is excluded.</td>
* </tr>
* </table>
*
***********************************************************************************************************************
**\page page_ble_toolchain Supported Software and Tools
**
* This version of the PSoC 6 BLE Middleware was validated for compatibility with the following Software and Tools:
*
* <table class="doxtable">
* <tr>
* <th>Software and Tools</th>
* <th>Version</th>
* </tr>
* <tr>
* <td>ModusToolbox Software Environment</td>
* <td>2.0</td>
* </tr>
* <tr>
* <td>- ModusToolbox Device Configurator</td>
* <td>2.0</td>
* </tr>
* <tr>
* <td>- ModusToolbox BT Personality in Device Configurator</td>
* <td>1.1</td>
* </tr>
* <tr>
* <td>- ModusToolbox BT Configurator tool</td>
* <td>2.0</td>
* </tr>
* <tr>
* <td>GCC Compiler</td>
* <td>7.2.1</td>
* </tr>
* <tr>
* <td>IAR Compiler</td>
* <td>8.32</td>
* </tr>
* <tr>
* <td>Arm Compiler 6 <sup><b>(Note <sup>1</sup>)</b></sup></td>
* <td>6.11</td>
* </tr>
* </table>
*
* <b>Note <sup>1</sup></b> The PSoC 6 BLE Middleware includes the pre-compiled libraries for
* Arm Compiler 6. They are built with the following options to be compatible with
* ModusToolbox and MBED:<br>
* '-fshort-enums' - Set the size of an enumeration type to the smallest
* data type that can hold all enumerator values.<br>
* '-fshort-wchar' - Set the size of wchar_t to 2 bytes.<br>
* To operate in custom environments with Arm Compiler 6, apply the above mentioned build options.
*
***********************************************************************************************************************
**\page page_ble_section_more_information More Information
**
*
*\section group_ble_operation_flow Operation Flow
*
* A typical application code implements three operating modes: initialization, normal operation, and low-power operation.
* Initialization should happen only at system power-up, or when waking from system hibernation. After initialization,
* the PSoC 6 BLE Middleware enters normal operation and periodically enters various degrees of low-power operation to conserve
* power.
*
* \par System Initialization
* The initialization stage happens at system power-up or when waking from system hibernation. This stage sets up the
* platform and the PSoC 6 BLE Middleware parameters. The application code should also start the PSoC 6 BLE Middleware and set up the
* callback functions for the event callbacks that happen in the other modes of operation.
*
* \par System Normal Operation
* Upon successful initialization of the PSoC 6 BLE Middleware or hibernate wakeup sequence, the PSoC 6 BLE Middleware enters normal
* mode. Normal operation first establishes a BLE connection if it is not already connected. It should then call
* Cy_BLE_ProcessEvents() to process all pending BLE events. When queue of BLE events is not full (Cy_BLE_GATT_GetBusyStatus()
* returns CY_BLE_STACK_STATE_FREE), it can transmit any data that need to be communicated and enter low-power operation,
* unless there is another pending event. In that case it should execute the normal operation flow again.
* Processing of BLE events should be performed at least once in a BLE connection event period. The BLE connection event
* is configured by the Central device while establishing a connection.
*
* \par System Low-power Operation
* When there are no pending interrupts in normal operation, the BLE Sub-System (BLESS) can be placed in low-power mode.
* All the high frequency blocks in BLESS are shutdown and the BLE link layer timing is maintained using low frequency
* clocks (WCO or PILO). CPU will not be able to access the BLESS registers in this mode. If an event happens at any
* time in low-power mode, it should re-enter normal operation.
*
* \note The MCU and BLESS have separate power modes and are able to go to different power modes independent of each other.
* The check marks in the following table show the possible combination of power modes of MCU and BLES
* \par
* <table class="doxtable">
* <tr>
* <th rowspan="2">BLESS<br>Power Modes</th>
* <th colspan="5">MCU Power Modes</th>
* </tr>
* <tr>
* <td>Active</td>
* <td>Sleep</td>
* <td>Deep sleep</td>
* <td>Hibernate</td>
* </tr>
* <tr>
* <td>Active (idle/Tx/Rx)</td>
* <td align="center">Y</td>
* <td align="center">Y</td>
* <td></td>
* <td></td>
* </tr>
* <tr>
* <td>Deep sleep (ECO off)</td>
* <td align="center">Y</td>
* <td align="center">Y</td>
* <td align="center">Y</td>
* <td></td>
* </tr>
* <tr>
* <td>Off</td>
* <td></td>
* <td></td>
* <td></td>
* <td align="center">Y</td>
* </tr>
* </table>
*
* To better understand of BLE operation flow refer \ref page_ble_quick_start section based on simple BLE example project.
*
**
**\section group_ble_device_bonding Device Bonding
**
* The PSoC 6 BLE Middleware stores the link key of a connection after pairing with the remote device. If a connection is lost and
* re-established, the devices use the previously stored key for the connection. The BLE stack updates the bonding data in
* RAM while the devices are connected. If the bonding data is to be retained during shutdown, the application can use
* Cy_BLE_StoreBondingData() API to write the bonding data from RAM to the dedicated flash location, as defined by the
* PSoC 6 BLE Middleware.
*
* Refer to the [CE215121_BLE_HID_Keyboard]
* (https://github.com/cypresssemiconductorco/PSoC-6-MCU-BLE-Connectivity-Designs/tree/master/CE215121_BLE_HID_Keyboard/CE215121_BLE_HID_Keyboard.cydsn)
* code example for usage details.
*
**
**\section group_ble_lfclk_conf LFCLK Configuration for BLESS Deep Sleep Mode
**
* The LFCLK configuration affects the PSoC 6 BLE Middleware's ability to operate in BLESS deep sleep mode. If the WCO or PILO are
* chosen as source clock, then the PSoC 6 BLE Middleware BLESS deep sleep mode is available for use. However, if the ILO is chosen,
* then the PSoC 6 BLE Middleware cannot enter BLESS deep sleep.
*
* \note The PSoC 6 BLE Middleware uses the LFCLK only during BLESS deep sleep mode, so ILO inaccuracy does not affect BLE communication.
*
**
**\subsection group_ble_lfclk_Pilo_conf Configuring PILO for BLESS Deep Sleep Mode
**
* The PSoC 6 BLE Middleware supports using the Precision ILO (PILO) (instead of the WCO) as the LF clock source.
*
* Using the PILO has limitations:
* - supports only a single connection
* - supports only the Peripheral/Slave role
* - not supported for preproduction hardware.
*
* Using the PILO as the LF clock source requires:
* - configure BLE ECO (AltHF) clock in ModusToolbox Device Configurator. The recommended frequency is 16 Mhz.
* - initial trimming (call Cy_SysClk_PiloInitialTrim() function) and measuring the step size of the PILO trimming
* (call Cy_SysClk_PiloUpdateTrimStep function) before BLE start.
*
* Both actions must happen during every power-up to get closest to the target frequency.
*
* The following code snippet shows usage:
* \snippet ble/snippet/main.c LFCLK configuration: PILO calibration
*
* \note Call trimming functions Cy_SysClk_PiloInitialTrim() and Cy_SysClk_PiloUpdateTrimStep() before Cy_BLE_Start(),
* on the CPU core running the BLE controller.
*
**
**\section group_ble_multiconnection_support Multi-Connection Support
**
* The PSoC 6 BLE Middleware supports up to four simultaneous Multi-Master Multi-Slave (MMMS) BLE connections in any combination of roles.
* For example, it can be a master of four slave devices (4M), a master of three slave devices and a slave of another device
* (3M1S), or a slave of four devices (4S), or any other combination.
* To configure the maximum number of BLE connections, refer to the <b>General Tab</b> section of ModusToolbox
* Bluetooth Configurator Guide (Maximum number of BLE connections).
* The PSoC 6 BLE Middleware supports a single instance of a GATT Server (single GATT database). The number of the Server instance
* field is always fixed to 1 in the Bluetooth Configurator dialog. You can add additional Services or a complete Server Profile
* to the existing Server tree and build a GATT database. This single GATT database is reused across all BLE connections.
* The PSoC 6 BLE Middleware manages multiple Client Characteristic Configuration Descriptor (CCCD) values. The CCCD value for each
* active connection is unique.
*
* The maximum number of CCCD storage SRAM data structures supported by the PSoC 6 BLE Middleware is determined by the number of
* active BLE connections/links that you select. The PSoC 6 BLE Middleware restores CCCD values in flash for each of the bonded
* devices while establishing a connection with a peer device.
*
* Use the connection handle at the application level to manage the multi-connection. The connection handle
* (\ref cy_stc_ble_conn_handle_t) appears when the connection is established (as the event parameter of the
* \ref CY_BLE_EVT_GATT_CONNECT_IND event).
*
* To work with a particular connection, BLE APIs (BLE Stack APIs, BLE Profile APIs) provide the parameter connHandle
* (e.g., Cy_BLE_BASS_SendNotification(cy_stc_ble_conn_handle_t connHandle,... ).)
* BLE events from the AppCallback function include a connHandle in eventParam structures to distinguish to which
* connection this event relates. The following code shows how an application can manage connection handles:
* \snippet ble/snippet/main.c AppCallback: How to manage connection handles
*
* Loop through all connected devices:
* \snippet ble/snippet/main.c BLE Common API: Cy_BLE_GetConnectionState()
*
* Use the Cy_BLE_GetDeviceRole(cy_stc_ble_conn_handle_t *connHandle) function to discover the role of the link-layer
* device connected to a peer device with the connection handle indicated by the connHandle parameter.
* Write attributes (characteristic, descriptors) requests from the peer device(s) for adopted services (e.g. BAS, HIDS,
* HRS, etc) handled by the PSoC 6 BLE Middleware.
*
* For the Custom service, write attributes requests handled by the application level in the AppCallback () callback event
* function.
* The following code shows the handling of the Write operation by a peer device for the Custom service:
* \snippet ble/snippet/main.c AppCallback: Handling Write operation for the Custom service
*
* The common MMMS usage are Multi-Master Single-Slave and Multi-Role when the PSoC 6 BLE Middleware is configured in all
* the GAP roles (Central, Peripheral, Observer, and Broadcaster).
*
* <b>Multi-Master Single-Slave Usage Block Diagram</b>
* \htmlonly <style>div.image img[src="ble_multi_master_single_slave_usage_block_diagram.png"]{width:732;}</style> \endhtmlonly
* \image html ble_multi_master_single_slave_usage_block_diagram.png
*
* <b>Multi-Role Usage Block Diagram</b>
* \htmlonly <style>div.image img[src="ble_multi_role_usage_block_diagram.png"]{width:775;}</style> \endhtmlonly
* \image html ble_multi_role_usage_block_diagram.png
*
* Refer to code examples [CE215118_BLE_Multi_Master_Single_Slave](https://github.com/cypresssemiconductorco/PSoC-6-MCU-BLE-Connectivity-Designs/tree/master/CE215118_BLE_Multi_Master_Single_Slave/CE215118_BLE_Multi_Master_Single_Slave.cydsn)
* and [CE215555_BLE_Multi_Role](https://github.com/cypresssemiconductorco/PSoC-6-MCU-BLE-Connectivity-Designs/tree/master/CE215555_BLE_Multi_Role/CE215555_BLE_Multi_Role.cydsn)
* for more details.
*
*
**
**\section group_ble_interrupt_notify BLE Interrupt Notification Callback
**
* The PSoC 6 BLE Middleware exposes BLE interrupt notifications to the application which indicates a different link layer and radio
* state transitions to the user from the BLESS interrupt context.
* The user registers for a particular type of a callback and the PSoC 6 BLE Middleware will call that registered callback basing
* on the registered mask (Refer to the Cy_BLE_RegisterInterruptCallback() and Cy_BLE_UnRegisterInterruptCallback() APIs).
* All interrupts masks are specified in the \ref cy_en_ble_interrupt_callback_feature_t enumeration.
*
* The possible interrupts which can trigger a user callback:
* 1. <b>CY_BLE_INTR_CALLBACK_BLESS_STACK_ISR</b> - Executed on every trigger of the BLESS interrupt.
* 2. <b>CY_BLE_INTR_CALLBACK_BLESS_INTR_STAT_DSM_EXITED</b> - Executed when the BLESS exits BLESS deep sleep mode and enters
* BLESS active mode. A BLESS deep sleep exit can be triggered automatically by link layer hardware or by different PSoC 6 BLE Middleware
* data transfer APIs, which needs the BLESS to be active.
* 3. <b>CY_BLE_INTR_CALLBACK_BLELL_CONN_EXT_INTR_EARLY</b> - Executed when the BLESS connection engine in Slave mode
* detects a BLE packet that matches its access address.
* 4. <b>CY_BLE_INTR_CALLBACK_BLELL_CONN_INTR_CE_RX</b> - Executed when the BLESS connection engine receives a non-empty
* packet from the peer device
* 5. <b>CY_BLE_INTR_CALLBACK_BLELL_CONN_INTR_CE_TX_ACK</b> - Executed when the BLESS connection engine receives an ACK
* packet from the peer device for the previously transmitted packet.
* 6. <b>CY_BLE_INTR_CALLBACK_BLELL_CONN_INTR_CLOSE_CE</b> - Executed when the BLESS connection engine closes the
* connection event. This interrupt is executed on every connection interval for connection, irrespective of data tx/rx
* state.
* 7. <b>CY_BLE_INTR_CALLBACK_BLESS_INTR_STAT_DSM_ENTERED</b> - Executed when the BLESS enters deep sleep mode. A user
* call to the Cy_SysPm_DeepSleep() function will trigger the BLESS deep sleep entry sequence. A time instance when
* each of these interrupts (#1 to #7) are triggered in a connection event are shown below (green).
* 8. <b>CY_BLE_INTR_CALLBACK_BLELL_SCAN_INTR_ADV_RX</b> - Executed when the BLESS scan engine receives an advertisement
* packet from the peer device.
* 9. <b>CY_BLE_INTR_CALLBACK_BLELL_SCAN_INTR_SCAN_RSP_RX</b> - Executed when the BLESS scan engine receives a scan
* response packet from the peer device in response to a scan request from the scanner.
* 10. <b>CY_BLE_INTR_CALLBACK_BLELL_ADV_INTR_CONN_REQ_RX</b> - Executed when the BLESS advertisement engine receives a
* connection request from the peer central device.
*
* An application can use these interrupt callbacks to know when the RF activity is about to begin/end or when the BLE
* device changes its state from advertisement to connected, or when the BLESS transitions between active and low-power
* modes, etc. These BLESS real-time states can be used to synchronize an application with the BLESS or prevent radio
* interference with other peripherals etc.
*
* \image html ble_intr_notify_feature.png
*
* To register / un-register a callback following APIs are available:
* \ref Cy_BLE_RegisterInterruptCallback() and \ref Cy_BLE_UnRegisterInterruptCallback().
*
*
**
**\section group_ble_unsupported_features Unsupported Features
**
* The PSoC 6 BLE Middleware stack does not support the following optional Bluetooth v5.0 protocol features, as listed in
* Vol 6, Part B, section 4.6 of the specification:
* - Connection Parameters Request Procedure (Vol 6, Part B, section 4.6.2)
* - Extended Reject Indication (Vol 6, Part B, section 4.6.3)
* - Slave-initiated Features Exchange (Vol 6, Part B, section 4.6.4)
* - Stable Modulation Index - Transmitter (Vol 6, Part B, section 4.6.10)
* - Stable Modulation Index - Receiver (Vol 6, Part B, section 4.6.11)
* - LE Extended Advertising (Vol 6, Part B, section 4.6.12)
* - LE Periodic Advertising (Vol 6, Part B, section 4.6.13)
* - Channel Selection Algorithm #2 (Vol 6, Part B, section 4.6.14)
* - Minimum Number of Used Channels Procedure (Vol 6, Part B, section 4.6.15)
*
**
**\section group_ble_lpm Low-power Modes
**
* The PSoC 6 BLE Middleware automatically registers sleep and deep sleep callback functions. These functions request the BLE Stack
* to put Bluetooth Low Energy Sub-System (BLESS) to low-power mode.
*
**
**\section group_ble_io_connections External PA/LNA Support
**
* RF front ends come in a variety of combinations. The most popular and comprehensive RF front ends come with a built-in
* power amplifier (PA) in the transmit path, a low-noise amplifier (LNA) in the receive path, a transmit/receive bypass
* path to bypass both the PA and LNA, and RF switches to select between transmit, receive, and bypass paths. Some front
* ends support multiple antennas. Some front ends have a built-in low-pass filter after the power amplifier. The discrete
* front ends also have almost the same configuration.
*
* \image html ble_ext_pa_lna_control.png
*
* \par Chip Enable Signal
* This signal is needed to put the front end to sleep or in standby whenever there is no radio activity. The signal is
* ON when either PA control or LNA control is ON.
*
* \par Tx ENABLE
* This signal is turned ON during transmission and turned OFF when not transmitting. This signal is active a little
* earlier than the actual start of transmission to allow for the time it takes for the Power amplifier to ramp up.
* This delay can be set in the EXT_PA_LNA_DLY_CNFG register.
*
* \par Rx ENABLE
* This signal is needed to choose between the bypass path and the LNA path. This signal is ON during reception and OFF
* when the receiver is OFF. This output is visible if the Enable external LNA Rx control output parameter is selected
* on the Advanced tab.
*
* The polarity of these signals are configurable and can be set in the EXT_PA_LNA_CTRL register by
* Cy_BLE_ConfigureExtPA() API.
*
*
**
**\section group_ble_additional_resources Additional Resources
**
*
* For more information, refer to the following documents:
*
** <a href="https://www.cypress.com/products/modustoolbox-software-environment">
* <b>ModusToolbox Software Environment, Quick Start Guide, Documentation, and Videos</b></a><br>
** <a href="https://github.com/cypresssemiconductorco"><b>PSoC 6 BLE Middleware Code Examples at GITHUB</b></a><br>
** <a href="https://www.cypress.com/ModusToolboxBLEConfig"><b>ModusToolbox BT Configurator Tool Guide</b></a><br>
** <a href="https://www.cypress.com/ModusToolboxDeviceConfig"><b>ModusToolbox Device Configurator Tool Guide</b></a><br>
** <a href="https://cypresssemiconductorco.github.io/bless/ble_api_reference_manual/html/index.html">
* <b>PSoC 6 BLE Middleware API Reference Guide</b></a><br>
** <a href="http://www.cypress.com/an210781">
* <b>AN210781 - Getting Started with PSoC 6 MCU with Bluetooth Low, Energy, (BLE) Connectivity</b></a><br>
** <a href="https://github.com/cypresssemiconductorco.github.io/psoc6pdl/pdl_api_reference_manual/html/index.html">
* <b>PDL API Reference</b></a><br>
** <a href="https://www.cypress.com/documentation/technical-reference-manuals/psoc-6-mcu-psoc-63-ble-architecture-technical-reference">
* <b>PSoC 6 Technical Reference Manual</b></a><br>
** <a href="http://www.cypress.com/documentation/software-and-drivers/cysmart-bluetooth-le-test-and-debug-tool">
* <b>CySmart - BLE Test and Debug Tool</b></a><br>
** <a href="http://www.cypress.com/cy8ckit-062-ble">
* <b>CY8CKIT-062-BLE PSoC 6 BLE Pioneer Kit</b></a><br>
** <a href="http://www.cypress.com"><b>Cypress Semiconductor</b></a><br>
*
* \note
* The links to another software component's documentation (middleware and PDL)
* point to GitHub to the latest available version of the software.
* To get documentation of the specified version, download from GitHub and unzip
* the component archive. The documentation is available in the <i>docs</i> folder.
*
***********************************************************************************************************************
**\page page_ble_section_indastry_standards Industry Standards
**
**\section section_ble_Qualify Bluetooth Qualification
*
* BLE solutions provided by Cypress are listed on the Bluetooth SIG website as certified solutions. The qualification
* is modular, allowing greater flexibility to customers. The following is the list of Qualified Design IDs (QD ID)
* and Declaration IDs.
* <table class="doxtable">
* <tr>
* <th>QD ID(s)</th>
* <th>Declaration ID#</th>
* <th>Description</th>
* </tr>
* <tr>
* <td>99158</td>
* <td><a href="https://launchstudio.bluetooth.com/ListingDetails/2312">D037716</a></td>
* <td>PSoC 6 MCU with Bluetooth Low Energy (BLE) Connectivity delivers ultra-low-power, best-in-class flexible and
* built-in security for the Internet of Things (IoT). It's built on an ultra-low-power 40-nm process technology
* and uses a dual-core Arm&reg; Cortex&reg;-M architecture, which includes an Cortex-M4 and Cortex-M0+. The
* BLE radio is built using an ultra-low-power 55-nm process. PSoC 6 MCU with BLE Connectivity combines a BLE
* subsystem with software-defined analog and digital peripherals, CapSense&reg;, programmable interconnect,
* a high-performance dual-core architecture, and critical security features in a single chip.</td>
* </tr>
* </table>
*
**
**\section section_ble_MISRA MISRA-C Compliance
**
* This section describes the MISRA-C:2004 compliance and deviations for the PSoC 6 BLE Middleware.
*
* <table class="doxtable">
* <tr>
* <th>MISRA rule</th>
* <th>Rule Class (Required/ Advisory)</th>
* <th>Rule Description</th>
* <th>Description of Deviation(s)</th>
* </tr>
* <tr>
* <td>1.2</td>
* <td>R</td>
* <td>No reliance shall be placed on undefined or unspecified behaviour.</td>
* <td>This specific behavior is explicitly covered in rule 5.1.</td>
* </tr>
* <tr>
* <td>5.1</td>
* <td>R</td>
* <td>Identifiers (internal and external) shall not rely on the significance of more than 31 characters.</td>
* <td>This rule applies to ISO:C90 standard. PDL conforms to ISO:C99 that does not require this limitation.</td>
* </tr>
* <tr>
* <td>5.6</td>
* <td>A</td>
* <td>No identifier in one name space should have the same spelling as an identifier in another name space,
* with the exception of structure member and union member names.</td>
* <td>The internal structure has field with the same name as function of standard library.
* This is safe as any assignment to the function from standard library will be discovered at design time.
* </td>
* </tr>
* <tr>
* <td>9.3</td>
* <td>R</td>
* <td>In an enumerator list, the '=' construct shall not be used to explicitly initialise members other than the
* first, unless all items are explicitly initialised.</td>
* <td>There are enumerator lists which depend on configurations (e.g. cy_en_ble_srvi_t) and require to
* use the '=' construct for calculating the instance count for the multi-instances services,
* such as HIDS, BAS or CUSTOM</td>
* </tr>
* <tr>
* <td>10.1</td>
* <td>R</td>
* <td>The value of an expression of integer type shall not be implicitly converted to a different underlying type
* under some circumstances.</td>
* <td>An operand of essentially enum type is being converted to unsigned type as a result of an arithmetic or
* conditional operation. The conversion does not have any unintended effect.</td>
* </tr>
* <tr>
* <td>10.3</td>
* <td>R</td>
* <td>A composite integer expression is being cast to a wider type.</td>
* <td>Use of a Cypress defined macro to access memory-mapped objects. Calculating the clock parameters. </td>
* </tr>
* <tr>
* <td>11.4</td>
* <td>A</td>
* <td>A cast should not be performed between a pointer to object type and a different pointer to object type.</td>
* <td>A cast involving pointers is conducted with caution that the pointers are correctly aligned for the type of
* object being pointed to.</td>
* </tr>
* <tr>
* <td>11.5</td>
* <td>A</td>
* <td>A cast shall not be performed that removes any const or volatile qualification from the type addressed by a
* pointer.</td>
* <td>The const or volatile qualification is lost during pointer cast before passing to the stack functions.</td>
* </tr>
* <tr>
* <td>13.7</td>
* <td>R</td>
* <td>Boolean operations whose results are invariant shall not be permitted.</td>
* <td>A Boolean operator can yield a result that can be proven to be always "true" or always "false" in some specific
* configurations because of generalized implementation approach.</td>
* </tr>
* <tr>
* <td>16.7</td>
* <td>A</td>
* <td>The object addressed by the pointer parameter is not modified and so the pointer could be of type 'pointer to
* const'.</td>
* <td>The 'base' and 'content' parameters in Cy_BLE_DeepSleepCallback function are not used by BLE but callback type
* is universal for all drivers.</td>
* </tr>
* <tr>
* <td>18.4</td>
* <td>R</td>
* <td>Unions shall not be used.</td>
* <td>The use of deviations is acceptable for packing and unpacking of data, for example when sending and
* receiving messages, and implementing variant records provided that the variants are differentiated
* by a common field. </td>
* </tr>
* <tr>
* <td>19.16</td>
* <td>R</td>
* <td>Preprocessing directives shall be syntactically meaningful even when excluded by the preprocessor.</td>
* <td>The reason for this deviation is that not standard directive "warning" is used. This directive is works
* on all compilers which PDL supports (e.g. GCC, IAR, MDK). </td>
* </tr>
* </table>
*
*
***********************************************************************************************************************
**\page page_group_ble_changelog Changelog
**
* @section section_group_ble_changelog_BLE_Middleware_Changes PSoC 6 BLE Middleware Changes
* This section lists changes made to the PSoC 6 BLE Middleware.
*
* <table class="doxtable">
* <tr><th><b>Version</b></th><th><b>Changes</b></th><th><b>Reason for Change</b></th></tr>
* <tr>
* <td rowspan="3">3.60</td>
* <td>Updated the procedure of processing the Write Request event from Stack.</td>
* <td>BLE middleware returns CY_BLE_EVT_GATTS_WRITE_REQ event twice for the Custom profile.</td>
* </tr>
* <tr>
* <td>Updated Cy_BLE_Init function.</td>
* <td>Cy_BLE_Init() returns CY_BLE_ERROR_INVALID_PARAMETER when BLE configured as Observer or Broadcaster only.</td>
* </tr>
* <tr>
* <td>Updated the BLE Stack to version 5.0.10.265.</td>
* <td>Refer to \ref section_group_ble_changelog_BLE_Stack_Changes.</td>
* </tr>
* <tr>
* <td rowspan="6">3.50</td>
* <td>Updated PILO part of BLESS MW HAL to be compatible with psoc6pdl 1.6.1.<br><br>
* Refer to section \ref group_ble_lfclk_Pilo_conf for details about the requirements for using the PILO as the LF clock source.</td>
* <td>To support PILO on the PSoC 64 Secure device.</td>
* </tr>
* <tr>
* <td>Added BLE Stack controller libraries with IPC communication (BLESS_CONTROLLER_IPC) for CM0+.</td>
* <td>Enable users to build their own CM0+ image with a BLE controller to operate in BLE Dual CPU mode.</td>
* </tr>
* <tr>
* <td>Updated the procedure of processing the CY_BLE_EVT_GATTS_WRITE_REQ event: an error response
* (with reason INVALID_HANDLE) is sent, if the handle was processed neither by registered services nor an application BLE callback.</td>
* <td>Improved the handling of the CY_BLE_EVT_GATTS_WRITE_REQ event to allow operation with a custom GATT database.</td>
* </tr>
* <tr>
* <td>Updated the CY_BLE_SFLASH_DIE_xxx macros (in cy_ble_gap.h) according to the PSoC 6 BLE production configuration.</td>
* <td>The silicon-generated "Company assigned" part of the device address has a high repetition rate of the generated MAC address.
* \note The silicon-generated "Company assigned" option does not guarantee a unique device address. For mass production,
* Cypress strongly suggests that the device address be programmed into the user area (Row 0) of the Sflash location via the SWD interface.
* Refer to section "Public device address" of [ModusToolbox BT Configurator Guide] (https://www.cypress.com/ModusToolboxBLEConfig) for details</td>
* </tr>
* <tr>
* <td>Added preprocessor expression to verify count of GATT database entries.</td>
* <td>BLE Stack supports maximum 512 entries of GATT database.</td>
* </tr>
* <tr>
* <td>Documentation updates.</td>
* <td>Changed the code snippet for initial PILO trimming and updating the trim step-size in section \ref group_ble_lfclk_Pilo_conf.</tr>
* <tr>
* <td>Updated the BLE Stack to version 5.0.8.220.</td>
* <td>Refer to \ref section_group_ble_changelog_BLE_Stack_Changes.</td>
* </tr>
*
* <tr>
* <td rowspan="3">3.40</td>
* <td>Added BLE Stack libraries for CM0+ core. </td>
* <td>Support BLE CM0+ Single CPU mode.</td>
* </tr>
* <tr>
* <td>Updated the procedure of processing events to wait 10 ms on CY_BLE_EVT_SOFT_RESET_COMPLETE events.</td>
* <td>Ensure that the controller is completely reset before generating the event to the application.
* Refer to CY_BLE_EVT_SOFT_RESET_COMPLETE event documentation.</td>
* </tr>
* <tr>
* <td>Updated the BLE Stack to version 5.0.7.196</td>
* <td>Refer to \ref section_group_ble_changelog_BLE_Stack_Changes.</td>
* </tr>
*
* <tr>
* <td rowspan="4">3.30</td>
* <td>Updated the procedure of processing events to clear the cy_ble_pair_Status flags on
* CY_BLE_EVT_STACK_SHUTDOWN_COMPLETE and CY_BLE_EVT_SOFT_RESET_COMPLETE events.</td>
* <td>Cy_BLE_IsDevicePaired() falsely returned True prior to authentication after a radio reset.</td>
* </tr>
* <tr>
* <td>Fixed the setting of a device address in handling the CY_BLE_EVT_STACK_ON event,
* if the BLE middleware is configured to operate only in the Broadcaster GAP role.</td>
* <td>With the BLE configured only as a broadcaster, the configuration for a BD address
* in the BLE customizer was not effective.</td>
* </tr>
* <tr>
* <td>Documentation updates.</td>
* <td>Documentation update and clarification.</td>
* </tr>
* <tr>
* <td>Updated the BLE Stack to version 5.0.6.161.</td>
* <td>Refer to \ref section_group_ble_changelog_BLE_Stack_Changes.</td>
* </tr>
*
* <tr>
* <td rowspan="6">3.20</td>
* <td>Added support ARM Compiler 6.<br>
* The BLE libraries are built with the following options to be compatible with ModusToolbox:<br>
* -fshort-enums - set the size of an enumeration type to the smallest data type that can hold all enumerator values<br>
* -fshort-wchar - Set the size of wchar_t to 2 bytes<br>
* o operate in custom environments with ARM Compiler 6, apply the above mentioned build options.</td>
* <td>Support Arm Compiler 6.</td>
* </tr>
* <tr>
* <td>Added support for BLE dual CPU mode with pre-compiled CM0 image.</td>
* <td>Pre-compiled application images executed on Cortex M0+ core of the PSoC 6 dual-core MCU.
* The images are provided as C arrays ready to be compiled as part of the Cortex M4 application. The Cortex M0+ application
* code is placed to internal flash by the Cortex M4 linker script. CM0P_BLESS image is used for BLE dual CPU mode.</td>
* </tr>
* <tr>
* <td>Fixed CY_BLE_ENABLE_PHY_UPDATE macros for enable "LE 2 Mbps" feature.</td>
* <td>"Enable LE 2 Mbps" feature does not work if it selects in BT Configurator.</td>
* </tr>
* <tr>
* <td>The PSoC 6 BLE Middleware is re-organized for supporting MT2.0 make flow.</td>
* <td>Support new make flow. Refer to section \ref page_ble_section_configuration_considerations for details. </td>
* </tr>
* <tr>
* <td>Disable support HCI over UART in PSoC 6 BLE Middleware side.</td>
* <td>The SoC mode library was split into three libraries: host, controller and stack manager. The new organization structure allows
* usage of the same controller library with BLESS host, a UART application or any third party host, over a software HCI interface.</td>
* </tr>
* <tr>
* <td>Updated the BLE Stack to version 5.0.5.110.</td>
* <td>Refer to \ref section_group_ble_changelog_BLE_Stack_Changes.</td>
* </tr>
*
* <tr>
* <td rowspan="4">3.10</td>
* <td>Disabled support BLE dual CPU mode. The following Software components are no longer supported:
* - BLE dual CPU mode, controller on CM0+ only, Soft FP prebuilt library,<br>
* - BLE dual CPU mode, host on CM4 only, Soft FP prebuilt library,<br>
* - BLE dual CPU mode, host on CM4 only, Hard FP prebuilt library.<br>
* </td>
* <td>Refer to ModusToolbox 1.1 Release Notes.</td>
* </tr>
* <tr>
* <td>Added the new SW component "BLE OTA with code sharing, Profile only". Updated documentation.</td>
* <td>Enable the PSoC 6 BLE Middleware to support OTA with code sharing.</td>
* </tr>
* <tr>
* <td>Fixed the Cy_BLE_HAL_BlessStart() function of the PSoC 6 BLE Middleware: removed the BLE ECO reset before BLESS initialization.</td>
* <td>Fix ModusToolbox 1.0 errata.</td>
* </tr>
* <tr>
* <td>Updated the BLE Stack to version 5.0.4.946.</td>
* <td>Refer to \ref section_group_ble_changelog_BLE_Stack_Changes.</td>
* </tr>
*
* <tr>
* <td rowspan="6">3.0</td>
* <td>The PSoC 6 BLE Middleware is re-organized, so that it can be built as a device agnostic immutable library. <br>
* - The BLE configure structure and BLE service configure structures were updated.<br>
* - Changed the configuration flow. Refer to section \ref page_ble_section_configuration_considerations to configuration details.<br>
* - Added the following functions:<br>
* \ref Cy_BLE_RegisterEventCallback(),<br>
* \ref Cy_BLE_EnableLowPowerMode()<br>
* - Changed BLE Interrupt Notification Callback feature interface:<br>
* added Cy_BLE_ConfigureIpcForInterruptCallback() <br>
* added \ref Cy_BLE_IntrNotifyIsrHandler()</td>
* <td>Enable the PSoC 6 BLE Middleware to be built as a device agnostic immutable library.</td>
* </tr>
* <tr>
* <td>Updated the RAM memory calculation (macros CY_BLE_GATT_MTU_BUFF_COUNT)</td>
* <td>Decreased the RAM usage by PSoC 6 BLE Middleware </td>
* </tr>
* <tr>
* <td>Decreased the ACT_LDO startup time from 4 to 10.</td>
* <td>Support for the 10uF capacitor on VDCDC. </td>
* </tr>
* <tr>
* <td>Updated the config structures cy_stc_ble_config_t. Added the pointer to the configuration parameter structure
* for the Radio PA calibration (field paCalConfig).</td>
* <td>Enabling the user to override the BLE radio's default TX power configurations.</td>
* </tr>
* <tr>
* <td>Documentation updates. </td>
* <td>Documentation update and clarification.</td>
* </tr>
* <tr>
* <td>Updated the BLE Stack to version 5.0.3.935.</td>
* <td>Refer to \ref section_group_ble_changelog_BLE_Stack_Changes.</td>
* </tr>
*
* <tr>
* <td rowspan="6">2.20</td>
* <td>Added support for PILO. </td>
* <td>PSoC 6 BLE supports Precision ILO (PILO) which can be used as an LF clock source.
* Refer to \ref group_ble_lfclk_conf for more details. </td>
* </tr>
* <tr>
* <td>Updated the Cy_BLE_RegisterAppHostCallback() functionality.</td>
* <td>Added support for BLE single CPU mode. </td>
* </tr>
* <tr>
* <td>Updated Write Request events handler in PSoC 6 BLE Middleware. Return CY_BLE_GATT_ERR_INVALID_HANDLE if
* the attribute handle is out of database range. </td>
* <td>Handling invalid range of attribute handle during Write Request event. </td>
* </tr>
* <tr>
* <td>Updated flash memory calculation for Bonded device list </td>
* <td>The function Cy_BLE_StackInit() returned CY_BLE_ERROR_INVALID_PARAMETER when the Resolving list
* parameter is set to 1. </td>
* </tr>
* <tr>
* <td>Documentation updates. </td>
* <td>Documentation update and clarification. Removed the Errata section. </td>
* </tr>
* <tr>
* <td>Updated the BLE Stack to version 5.0.2.917.</td>
* <td>Refer to \ref section_group_ble_changelog_BLE_Stack_Changes.</td>
* </tr>
*
* <tr>
* <td rowspan="2">2.10</td>
* <td>Added return value CY_BLE_ERROR_FLASH_WRITE_NOT_PERMITED for following functions:
* Cy_BLE_StoreAppData()<br>Cy_BLE_StoreBondingData()<br>
* Added assertion in Cy_BLE_HAL_NvramWrite() to catch failure (CY_SYSPM_INVALID_STATE) during increasing
* core voltage from 0.9V to 1.1V for flash operation.
* </td>
* <td>Flash operation is not permitted with protection context (PC) value > 0 and core voltage 0.9V,
* because of a preproduction hardware limitation.
* </td>
* </tr>
* <tr>
* <td>Documentation updates. </td>
* <td>Documentation update and clarification. </td>
* </tr>
*
* <tr>
* <td rowspan="5">2.0<br> Production</td>
* <td>Added the BLE user configuration file cy_ble_config.h. </td>
* <td>To make the BLE configuration more flexible.
* Allows redefining the configuration define(s) generated by the BLE customizer
* and default BLE clock defines (from cy_ble_clk.h).
* </td>
* </tr>
* <tr>
* <td>Updated the BLE Interrupt Notification Feature. </td>
* <td>Added support for BLE dual CPU mode.</td>
* </tr>
* <tr>
* <td>Updated the Cy_BLE_GATTS_ReadAttributeValueLocal() and Cy_BLE_GATTS_ReadAttributeValuePeer() functions. </td>
* <td>Those functions have the wrong Locally/Peer initiate operation flag.</td>
* </tr>
* <tr>
* <td>The following defined values for the CY_BLE_STACK_MODE
* configuration parameter were deprecated:<br>
* CY_BLE_STACK_HOST_ONLY<br>
* CY_BLE_STACK_HOST_CONTR_UART<br>
* CY_BLE_STACK_HOST_IPC.<br>
* The following defined values were renamed:<br>
* CY_BLE_STACK_DEBUG to CY_BLE_STACK_MODE_SINGLE_SOC <br>
* CY_BLE_STACK_RELEASE to CY_BLE_STACK_MODE_DUAL_IPC.<br>
* </td>
* <td>Deprecated not supported (debug) modes.<br>
* The defines CY_BLE_CONFIG_STACK_DEBUG and CY_BLE_CONFIG_STACK_RELEASE were renamed to have more meaningful name.
* </td>
* </tr>
* <tr>
* <td>The BLE Stack was updated to version 5.0.0.898. </td>
* <td>Refer to \ref section_group_ble_changelog_BLE_Stack_Changes.</td>
* </tr>
*
* <tr>
* <td rowspan="2" >2.0<br> BETA#2</td>
* <td>Added new API: <br> Cy_BLE_IsDevicePaired(),<br> Cy_BLE_GetDeviceRole(),<br> Cy_BLE_IsPeerConnected(),<br>
* Cy_BLE_GATTS_WriteAttributeValuePeer(),<br> Cy_BLE_GATTS_WriteAttributeValueLocal(),<br>
* Cy_BLE_GATTS_ReadAttributeValuePeer(),<br> Cy_BLE_GATTS_ReadAttributeValueLocal(),<br> Cy_BLE_GATTS_IsIndicationEnabled(),<br>
* Cy_BLE_GATTS_SendIndication(),<br> Cy_BLE_GATTS_IsNotificationEnabled(),<br> Cy_BLE_GATTS_SendNotification(),<br>
* Cy_BLE_GATTS_SendErrorRsp(),<br> Cy_BLE_GATTC_SendConfirmation().
* </td>
* <td>Improve usability</td>
* </tr>
* <tr>
* <td>The BLE Stack was updated to version 5.0.0.855.</td>
* <td>Refer to \ref section_group_ble_changelog_BLE_Stack_Changes.</td>
* </tr>
*
* <tr>
* <td rowspan="4" >2.0 <br> BETA#1</td>
* <td>Renamed API: <br>
* Cy_BLE_GAP_UpdateAdvScanData() to Cy_BLE_GAPP_UpdateAdvScanData(); <br>
* Cy_BLE_SetConnectionPriority() to Cy_BLE_GAP_SetConnectionPriority(). <br>
* </td>
* <td>Consistent API naming scheme</td>
* </tr>
* <tr>
* <td>Made the maximum number of connections configurable.</td>
* <td>SRAM consumption reducing when extra connections are not used.</td>
* </tr>
* <tr>
* <td>Added new options for the CPU Core parameter.</td>
* <td>Support of single-core devices.
* </tr>
* <tr>
* <td>The BLE Stack was updated to version 5.0.0.785.</td>
* <td>Refer to \ref section_group_ble_changelog_BLE_Stack_Changes.</td>
* </tr>
*
* <tr>
* <td>1.0</td>
* <td>Initial version.</td>
* <td></td>
* </tr>
* </table>
*
**\section section_group_ble_changelog_BLE_Stack_Changes BLE Stack Changes
* This section lists changes made to the BLE Stack.
*
* <table class="doxtable">
* <tr><th><b>Version</b></th><th><b>Changes</b></th><th><b>Reason for Change</b></th></tr>
*
* <tr>
* <td rowspan="6">5.0.10.265</td>
* <td>Updated BLE Stack ATT and GATT.</td>
* <td>Updated to fix incorrect return code in error messages.</td>
* </tr>
* <tr>
* <td>Updated BLE Controller.</td>
* <td>Added changes required to qualify for BLE Spec. 5.2.</td>
* </tr>
* <tr>
* <td>Updated channel map indication handler.</td>
* <td>Optimized the Low-Power-Mode (LPM) performance of PSoC 6 BLE Controller. </td>
* </tr>
* <tr>
* <td>Updated Radio TX Power Change Handling Procedure.</td>
* <td>The radio TX power change handler was incorrectly being called from interrupt context whereas the ideal location for the same is from the task context.</td>
* </tr>
* <tr>
* <td>Enhanced GATT Server implementation.</td>
* <td>Updated the GATT server implementation to handle large data base (> 512 entries).</td>
* </tr>
* <tr>
* <td>Re-factored Shutdown code for Dual CPU mode.</td>
* <td>Improved the handling of Cy_BLE_StackShutdown API to avoid timing-sensitive bugs.</td>
* </tr>
*
* <tr>
* <td rowspan="3">5.0.8.220</td>
* <td>Updated BLE ISR for SoC mode.</td>
* <td>Enhanced the BLE ISR to handle LL Channel Map in interrupt context for SoC mode.</td>
* </tr>
* <tr>
* <td>Updated low-power mode API.</td>
* <td>Updated Cy_BLE_ControllerEnterLPM API for handling a scenario where wake-up is initiated by the hardware.</td>
* </tr>
* <tr>
* <td>Re-factored Shutdown code for Dual CPU mode.</td>
* <td>Improved the handling of Cy_BLE_StackShutdown API to avoid timing-sensitive bugs.</td>
* </tr>
*
* <tr>
* <td rowspan="3">5.0.7.196</td>
* <td>Updated the APIs to handle the interrupt locking.</td>
* <td>A better locking mechanism to avoid potential timing-sensitive bugs.</td>
* </tr>
* <tr>
* <td>Re-factored the radio initialization sequence.</td>
* <td>It was observed that on customer boards, re-factoring the radio initialization sequence provided
* an improved stability to the reset sequence.</td>
* </tr>
* <tr>
* <td>Fix for CVE-2019-16336.</td>
* <td>Enforced the length check on incoming LL PDUs to protect against buffer overflows caused by
* malicious packets. Malformed Data packets will be dropped in the LL.
* Malformed Control packets will be replied with LL_UNKNOWN_RSP.
* For detail, refer to the [CVE-2019-16336](https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2019-16336) vulnerability page.
* </td>
* </tr>
*
* <tr>
* <td rowspan="3">5.0.6.161</td>
* <td>Updated the radio configuration.</td>
* <td>To support the new packages: QFN68 and BGA124.</td>
* </tr>
* <tr>
* <td>Added checks for Malformed LL PDUs.</td>
* <td>LL PDUs with the incorrect length must be replied with LL_UNKNOWN_RSP per latest BLE spec.
* Also, this prevents against any unknown behavior triggered due to malicious LL PDUs.</td>
* </tr>
* <tr>
* <td>Documentation update.</td>
* <td>Updated the documentation for the CY_BLE_EVT_RADIO_TEMPERATURE and CY_BLE_EVT_RADIO_VOLTAGE_LEVEL events.</td>
* </tr>
*
* <tr>
* <td rowspan="7">5.0.5.110</td>
* <td>Optimized the ACL TX path for a better throughput.</td>
* <td>The throughput was observed to be low when the stack libraries were linked with MDK libraries.</td>
* </tr>
* <tr>
* <td>Added support for autonomous feature exchange on connection complete.</td>
* <td>Few mobile phone (eg. Droid Turbo) negotiate DLE with TX octets > 27 bytes but do not actually support the
* DLE feature. This leads to interoperability issues with such phones. An autonomous feature exchange will be
* triggered when the PSoC 6 device is in master role, and the DLE and PHY update negotiations will be triggered
* only if the peer supports DLE/PHY update feature. In case PSoC 6 is in a slave role,
* DLE/PHY update negotiations will not be triggered till the peer initiates a feature exchange procedure and hence
* exchanges it's feature set.</td>
* </tr>
* <tr>
* <td>Added support for configurable PA LDO settings.</td>
* <td>It was observed that on customer boards, the output RF TX power was sub-optimal, when the factory settings for
* PA LDO were used. To fine tune the PA LDO settings at the customer end, the same were now exposed via the
* paCalConfig member of stackConfig input structure to the Cy_BLE_StackInit API.</td>
* </tr>
* <tr>
* <td>Updated RSSI formula.</td>
* <td>With the previous formula, there existed a non-linearity in the measured value of RSSI at ~ -50dBm. </td>
* </tr>
* <tr>
* <td>The SoC mode library was split into three libraries: host, controller and stack manager.</td>
* <td>The new organization structure allows usage of the same controller library with BLESS host,
* a UART application or any third party host, over a software HCI interface. </td>
* </tr>
* <tr>
* <td>Fixed issue with disconnection.</td>
* <td>If an LL procedure is on-going, and a disconnect command is issued, the Terminate PDU is not transmitted over
* the air even after the procedure completes. </td>
* </tr>
* <tr>
* <td>Updated Cy_BLE_StackInit API to check that if DLE is disabled, max TX and RX octets must be set to 27 Bytes.</td>
* <td>The check for the DLE parameters was not correct for the case when DLE is disabled.</td>
* </tr>
*
* <tr>
* <td rowspan="4">5.0.4.946</td>
* <td>Fix for CVE-2019-17061.</td>
* <td>Updated the handling of LL PDU with LLID 0 to prevent corruption in subsequently received LL PDUs. Such packets will be dropped in the LL, but the peer will be acked for the packet. For detail, refer to the [CVE-2019-17061](https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2019-17061) vulnerability page.</td>
* </tr>
* <tr>
* <td>Enabled the RSSI reading after the CRC has been received.</td>
* <td>The RSSI value was not being updated if deep sleep was enabled in the controller.</td>
* </tr>
* <tr>
* <td>Optimized the ACL TX path for a better throughput.</td>
* <td>In BLE dual CPU mode, with CM0p running at 25 MHz, the BLE throughput was observed to be sub-optimal.</td>
* </tr>
* <tr>
* <td>Added support for the PDL APIs to calculate temperature and Battery monitor output.</td>
* <td>New APIs were added to the PDL to calculate the absolute values of the die temperature and radio voltage,
* using the raw values from the radio.</td>
* </tr>
*
* <tr>
* <td rowspan="4">5.0.3.935</td>
* <td>1.Added the option to override the paCal table and LoBuff table from the application.<br>
* 2.Added the option to set lobuflimit and calvallimit from the application.<br>
* 3.Updated the PA LDO settings to use the settings recommended by the designers.
* </td>
* <td>Additional flexibility is provided to obtain an optimal output power at the user's board.<br>
* The new PA LDO setting recommended by the designers results in the ~ 1dBm higher output power
* (measured using Cypress 001 kits) at the 4dBm setting.
* </td>
* </tr>
* <tr>
* <td>The local SCA with PILO is enabled to be set to 500 ppm.</td>
* <td>The PILO frequency accuracy is of the order of 500 ppm.</td>
* </tr>
* <tr>
* <td>The BLE SMP pairing vulnerability fix:<br>
* 1.Added the public key validation check for the remote key.<br>
* 2.Updated the documentation for the Cy_BLE_GAP_GenerateSetLocalP256Keys() API,
* to recommend the application to update the private key as mentioned in the BLE Core spec 5.0 Vol. 3 Part H, Section 2.3.6.<br>
* 3.Added the feature bit mask for the remote public key validation.
* </td>
* <td>The update to comply with BLE Core Specification Errata 10734.</td>
* </tr>
* <tr>
* <td>1.When none of the BLE hardware engines are active, disable the hardware auto wakeup feature before entering deep sleep mode.<br>
* 2.Re-enable the hardware auto wakeup feature before entering deep sleep if any of the BLE hardware blocks are active.<br>
*
* </td>
* <td>The fix for a spurious interrupt triggered by the link layer hardware when the firmware continuously enters/exits deep sleep mode.</td>
* </tr>
*
* <tr>
* <td rowspan="3">5.0.2.917</td>
* <td>Added a new BLE event - CY_BLE_EVT_GAP_ADV_TX, which is triggered on transmission of an ADV packet (if this
* feature is enabled). </td>
* <td>Support for BLE mesh.</td>
* </tr>
* <tr>
* <td>Dual CPU mode: Stack Shutdown sequence modified to shut down controller before
* sending CY_BLE_EVT_STACK_SHUTDOWN_COMPLETE event. </td>
* <td>The controller was shut-down after informing the application that shutdown had been completed. </td>
* </tr>
* <tr>
* <td>Updated the Cy_BLE_HAL_BlessInterruptHandler API to return status. </td>
* <td>This return parameter indicates that user should call Cy_BLE_ProcessEvents() to process pending BLE Stack
* events.</td>
* </tr>
*
* <tr>
* <td rowspan="4">5.0.1.906</td>
* <td>Added check for any pending real time procedures before allowing autonomous PHY update request. </td>
* <td>Autonomous PHY update request was being initiated without a check for "LL control procedure collision". </td>
* </tr>
* <tr>
* <td>Fixed memory allocation failure issue observed when initializing buffer pool for ACL Rx Packet. </td>
* <td>Memory allocation failure was observed when DLE Rx Octet < TxOctet. </td>
* </tr>
* <tr>
* <td>Added support to disconnect LE link whenever there is real-time LL procedure collision. </td>
* <td>Consistent with BLE Spec 5.0 erratum 7106</td>
* </tr>
* <tr>
* <td>Added support for PILO. </td>
* <td>PSoC 6 BLE supports a Precision ILO which can be used as an LF clock source instead of the WCO. </td>
* </tr>
*
* <tr>
* <td rowspan="2">5.0.0.898</td>
* <td>Enhancement is done to rerun the scheduler on close CE, if the event about to be scheduled is in past. </td>
* <td>Blocking flash write operation blocks the CPU from executing any interrupts (including BLESS isr) for > 17ms,
* Due to this, if the CI for connection is smaller than 17ms, the BLE link will disconnect.
* </td>
* </tr>
* <tr>
* <td>The calibration target value for the Max output power level is modified under the user-defined condition.</td>
* <td>The enhancement to support the 5dBm Tx power in the BLE stack.</td>
* </tr>
*
* <tr>
* <td rowspan="3">5.0.0.855</td>
* <td>Changed the input parameter for the Cy_BLE_SetCustomEventMask() API from (uint8* mask) to (uint32 mask).</td>
* <td>Consistent with the bit mask scheme. </td>
* </tr>
* <tr>
* <td>1.The timer context was never reset, it is made to reset during the Stack shutdown. <br>
* 2.The timer context was not freed even when the timer start failed. It is made free when the timer start
* fails due to any reason.
* </td>
* <td>The Cy_BLE_GAPC_StopScan() function returns CY_BLE_ERROR_MAX when the Cy_BLE_GAPC_StopScan() function is
* called to stop a previously-initiated scanning procedure.
* This issue occurs only when the authentication procedure is occurring and the application tries to stop
* the scan </td>
* </tr>
* <tr>
* <td>1.The DLE control procedure timer is started only if the queuing Data Length Request in the Hardware FIFO
* is successful.<BR>
* 2.Added checks to handle the race condition between the ACK processing and Handling data PDU's from the Host.
* </td>
* <td>Unexpected disconnection due to an LMP Response timeout in the embedded stress application. This issue is
* due to:<BR>
* 1.The DLE control procedure timer was started even if the sending Data Length Request PDU failed when queuing
* it in the Hardware FIFO.<BR>
* 2.Due to the race condition between the ACK processing and Handling data PDU's from the Host.
* </td>
* </tr>
*
* <tr>
* <td>5.0.0.785</td>
* <td>Initial BLE Stack version. </td>
* <td> </td>
* </tr>
* </table>
*
*
************************************************************************************************************************
* \defgroup group_ble_common_api BLE Common API
************************************************************************************************************************
* \ingroup group_ble
*
* \brief
* The common API act as a general interface between the BLE application
* and the BLE Stack module. The application may use these API to control
* the underlying hardware such as radio power, data encryption and device
* bonding via the stack. It may also access the GAP, GATT and L2CAP layers
* of the stack. These are divided into the following categories:
* - \ref group_ble_common_api_functions
* - \ref group_ble_common_api_gap_functions_section
* - \ref group_ble_common_api_gatt_functions_section
* - \ref group_ble_common_api_l2cap_functions
*
* These API also use API specific definitions and data structures. These are classified
* in the following subset:
* - \ref group_ble_common_api_definitions
*
*
* \defgroup group_ble_common_api_functions BLE Common Core Functions
* \ingroup group_ble_common_api
* \brief
* The common core API are used for general BLE configuration.
* These include initialization, power management, and utilities.
*
* \defgroup group_ble_common_Whitelist_api_functions Whitelist API
* \ingroup group_ble_common_api_functions
* \brief
* The API are used for enable user to use Whitelist feature of BLE Stack.
*
* \defgroup group_ble_common_Privacy_api_functions Link Layer Privacy API
* \ingroup group_ble_common_api_functions
* \brief
* The API are used for enable user to use Link Layer Privacy feature of BLE Stack.
*
* \defgroup group_ble_common_Data_length_extension_api_functions Data Length Extension (DLE) API
* \ingroup group_ble_common_api_functions
* \brief
* The API are used for enable user to use Data Length Extension (DLE) feature of BLE Stack.
*
* \defgroup group_ble_common_2MBPS_api_functions 2Mbps Feature API
* \ingroup group_ble_common_api_functions
* \brief
* The API are used for enable user to use 2Mbps feature of BLE Stack.
*
* \defgroup group_ble_common_LE_ping_api_functions LE Ping API
* \ingroup group_ble_common_api_functions
* \brief
* The API are used for enable user to use LE Ping feature of BLE Stack.
*
* \defgroup group_ble_common_Encryption_api_functions AES Engine API
* \ingroup group_ble_common_api_functions
* \brief
* BLE sub system AES Engine is exposed through this API.
*
* \defgroup group_ble_common_HCI_api_functions BLE HCI API
* \ingroup group_ble_common_api_functions
* \brief
* API exposes BLE Stack's Host HCI to user, if they want to do DTM testing or use BLE Controller alone.
*
* \defgroup group_ble_common_Intr_feature_api_functions BLE Interrupt Notification Callback
* \ingroup group_ble_common_api_functions
* \brief
* API exposes BLE interrupt notifications to the application which indicates a different link layer and radio state
* transitions to the user from the BLESS interrupt context. The user registers for a particular type of a callback and
* the PSoC 6 BLE Middleware will call that registered callback basing on the registered mask.
* Refer to section \ref group_ble_interrupt_notify.
*
* \defgroup group_ble_common_api_gap_functions_section GAP Functions
* \ingroup group_ble_common_api
* \brief
* The GAP APIs allow access to the Generic Access Profile (GAP) layer
* of the BLE Stack. Depending on the chosen GAP role in the Bluetooth Configurator, you may
* use a subset of the supported APIs.
*
* The GAP API names begin with Cy_BLE_GAP_. In addition to this, the APIs
* also append the GAP role initial letter in the API name.
*
* \defgroup group_ble_common_api_gap_functions GAP Central and Peripheral Functions
* \ingroup group_ble_common_api_gap_functions_section
* \brief
* These are APIs common to both GAP Central role and GAP Peripheral role.
* You may use them in either roles.
*
* No letter is appended to the API name: Cy_BLE_GAP_
*
* \defgroup group_ble_common_api_gap_central_functions GAP Central Functions
* \ingroup group_ble_common_api_gap_functions_section
* \brief
* APIs unique to designs configured as a GAP Central role.
*
* A letter 'C' is appended to the API name: Cy_BLE_GAPC_
*
* \defgroup group_ble_common_api_gap_peripheral_functions GAP Peripheral Functions
* \ingroup group_ble_common_api_gap_functions_section
* \brief
* APIs unique to designs configured as a GAP Peripheral role.
*
* A letter 'P' is appended to the API name: Cy_BLE_GAPP_
*
*
* \defgroup group_ble_common_api_gatt_functions_section GATT Functions
* \ingroup group_ble_common_api
* \brief
* The GATT APIs allow access to the Generic Attribute Profile (GATT) layer
* of the BLE Stack. Depending on the chosen GATT role in the Bluetooth Configurator, you may
* use a subset of the supported APIs.
*
* The GATT API names begin with CyBle_Gatt. In addition to this, the APIs
* also append the GATT role initial letter in the API name.
*
* \defgroup group_ble_common_api_gatt_functions GATT Client and Server Functions
* \ingroup group_ble_common_api_gatt_functions_section
* \brief
* These are APIs common to both GATT Client role and GATT Server role.
* You may use them in either roles.
*
* No letter is appended to the API name: Cy_BLE_GATT_
*
* \defgroup group_ble_common_api_gatt_client_functions GATT Client Functions
* \ingroup group_ble_common_api_gatt_functions_section
* \brief
* APIs unique to designs configured as a GATT Client role.
*
* A letter 'C' is appended to the API name: Cy_BLE_GATTC_
*
* \defgroup group_ble_common_api_gatt_server_functions GATT Server Functions
* \ingroup group_ble_common_api_gatt_functions_section
* \brief
* APIs unique to designs configured as a GATT Server role.
*
* A letter 'S' is appended to the API name: Cy_BLE_GATTS_
*
*
* \defgroup group_ble_common_api_l2cap_functions L2CAP Functions
* \ingroup group_ble_common_api
* \brief
* The L2CAP APIs allow access to the Logical link control and adaptation
* protocol (L2CAP) layer of the BLE Stack.
*
* The L2CAP API names begin with Cy_BLE_L2CAP.
*
*
*
* \defgroup group_ble_common_api_events BLE Common Events
* \ingroup group_ble_common_api
* \brief
* The BLE Stack generates events to notify the application on various status
* alerts concerning the stack. These can be generic stack events or can be
* specific to GAP, GATT or L2CAP layers. The service specific events are
* handled separately in \ref group_ble_service_api_events.
*
*
* \defgroup group_ble_common_api_definitions_section BLE Common Definitions and Data Structures
* \ingroup group_ble_common_api
* \brief
* Contains definitions and structures that are common to all BLE common API.
* Note that some of these are also used in Service-specific API.
*
* \defgroup group_ble_common_macros_error BLE Error Code
* \ingroup group_ble_common_api_definitions_section
* \brief
* Contains definitions for all the spec defined error code in Core Spec 5.0, Vol2, Part D
*
* Related Document:
* BLE Standard Spec - CoreV5.0
*
* \defgroup group_ble_common_api_macros_section Macros
* \ingroup group_ble_common_api_definitions_section
*
* \defgroup group_ble_common_api_macros Common
* \ingroup group_ble_common_api_macros_section
* BLE Common macros
*
* \defgroup group_ble_common_api_macros_gatt_db BLE GATT Database
* \ingroup group_ble_common_api_macros_section
* \brief
* BLE GATT Database macros
*
* \defgroup group_ble_common_api_macros_gatt_uuid_services BLE Services UUID
* \ingroup group_ble_common_api_macros_section
* \brief
* BLE Services Universal Unique Identifier (UUID) macros
*
* \defgroup group_ble_common_api_macros_gatt_uuid_char_gatt_type BLE GATT Attribute Types UUID
* \ingroup group_ble_common_api_macros_section
* \brief
* BLE GATT Attribute Types defined by GATT Profile UUID macros
*
* \defgroup group_ble_common_api_macros_gatt_uuid_char_desc BLE GATT Characteristic Descriptors UUID
* \ingroup group_ble_common_api_macros_section
* \brief
* BLE GATT Attribute Types defined by GATT Profile UUID macros
*
* \defgroup group_ble_common_api_macros_gatt_uuid_char_type BLE GATT Characteristic Types UUID
* \ingroup group_ble_common_api_macros_section
* \brief
* BLE GATT Characteristic Types UUID macros
*
* \defgroup group_ble_common_api_macros_appearance_values BLE Appearance values
* \ingroup group_ble_common_api_macros_section
* \brief
* BLE Appearance values macros
*
* \defgroup group_ble_common_api_data_struct_section Data Structures
* \ingroup group_ble_common_api_definitions_section
*
* \defgroup group_ble_common_api_definitions Common
* \ingroup group_ble_common_api_data_struct_section
* \brief
* Contains the common definitions and data structures used in the BLE.
*
* \defgroup group_ble_common_api_gap_definitions GAP
* \ingroup group_ble_common_api_data_struct_section
* \brief
* Contains the GAP specific definitions and data structures used in the
* GAP APIs.
*
* \defgroup group_ble_common_api_gatt_definitions GATT
* \ingroup group_ble_common_api_data_struct_section
* \brief
* Contains the GATT specific definitions and data structures used in the
* GATT APIs.
*
* \defgroup group_ble_common_api_l2cap_definitions L2CAP
* \ingroup group_ble_common_api_data_struct_section
* \brief
* Contains the L2CAP specific definitions and data structures used in the
* L2CAP APIs.
*
* \defgroup group_ble_common_api_global_variables Global Variables
* \ingroup group_ble_common_api
* \defgroup group_ble_service_api BLE Service-Specific API
* \ingroup group_ble
* \brief
* This section describes BLE Service-specific API. The Service
* API are only included in the design if the Service is
* added to the selected Profile in the Bluetooth Configurator.
* These are interfaces for the BLE application to use during BLE
* connectivity. The service-specific API internally use the BLE
* Stack API to achieve the Service use case.
* Refer to the <a href="https://www.bluetooth.org/en-us/specification/adopted-specifications">Special Interest Group
* Web Site</a>
* for links to the latest specifications and other documentation.
*
* Many of the API will generate Service-specific events. The events
* are also used in the Service-specific callback functions. These are
* documented in:
* - \ref group_ble_service_api_events
*
*
* \defgroup group_ble_service_api_events BLE Service-Specific Events
* \ingroup group_ble_service_api
* \brief
* The BLE Stack generates service-specific events to notify the application
* that a service-specific status change needs attention.
*
*
*
* \defgroup group_ble_service_api_ANCS Apple Notification Center Service (ANCS)
* \ingroup group_ble_service_api
* \brief
* The Apple Notification Center Service provides iOS notifications from Apple devices for accessories.
*
* Depending on the chosen GATT role in the Bluetooth Configurator, you may
* use a subset of the supported API.
*
* The ANCS API names begin with Cy_BLE_ANCS_. In addition to this, the API
* also append the GATT role initial letter in the API name.
*
* \defgroup group_ble_service_api_ANCS_server_client ANCS Server and Client Function
* \ingroup group_ble_service_api_ANCS
* \brief
* These are API common to both GATT Client role and GATT Server role.
* You may use them in either roles.
*
* No letter is appended to the API name: Cy_BLE_ANCS_
*
* \defgroup group_ble_service_api_ANCS_server ANCS Server Functions
* \ingroup group_ble_service_api_ANCS
* \brief
* API unique to ANCS designs configured as a GATT Server role.
*
* A letter 's' is appended to the API name: Cy_BLE_ANCSS_
*
* \defgroup group_ble_service_api_ANCS_client ANCS Client Functions
* \ingroup group_ble_service_api_ANCS
* \brief
* API unique to ANCS designs configured as a GATT Client role.
*
* A letter 'c' is appended to the API name: Cy_BLE_ANCSC_
*
* \defgroup group_ble_service_api_ANCS_definitions ANCS Definitions and Data Structures
* \ingroup group_ble_service_api_ANCS
* \brief
* Contains the ANCS specific definitions and data structures used
* in the ANCS API.
*
*
*
* \defgroup group_ble_service_api_ANS Alert Notification Service (ANS)
* \ingroup group_ble_service_api
* \brief
* The Alert Notification Service exposes alert information in a device.
*
* This information includes:
* - Type of alert occurring in a device
* - Additional text information such as the caller's ID or sender's ID
* - Count of new alerts
* - Count of unread alert items
*
* Depending on the chosen GATT role in the Bluetooth Configurator, you may
* use a subset of the supported API.
*
* The ANS API names begin with Cy_BLE_ANS_. In addition to this, the API
* also append the GATT role initial letter in the API name.
*
* \defgroup group_ble_service_api_ANS_server_client ANS Server and Client Function
* \ingroup group_ble_service_api_ANS
* \brief
* These are API common to both GATT Client role and GATT Server role.
* You may use them in either roles.
*
* No letter is appended to the API name: Cy_BLE_ANS_
*
* \defgroup group_ble_service_api_ANS_server ANS Server Functions
* \ingroup group_ble_service_api_ANS
* \brief
* API unique to ANS designs configured as a GATT Server role.
*
* A letter 's' is appended to the API name: Cy_BLE_ANSS_
*
* \defgroup group_ble_service_api_ANS_client ANS Client Functions
* \ingroup group_ble_service_api_ANS
* \brief
* API unique to ANS designs configured as a GATT Client role.
*
* A letter 'c' is appended to the API name: Cy_BLE_ANSC_
*
* \defgroup group_ble_service_api_ANS_definitions ANS Definitions and Data Structures
* \ingroup group_ble_service_api_ANS
* \brief
* Contains the ANS specific definitions and data structures used
* in the ANS API.
*
*
*
* \defgroup group_ble_service_api_AIOS Automation IO Service (AIOS)
* \ingroup group_ble_service_api
* \brief
* The Automation IO Service enables a device to connect and interact with an Automation IO Module (IOM) in order to access digital and analog signals.
*
* Depending on the chosen GATT role in the Bluetooth Configurator, you may
* use a subset of the supported API.
*
* The AIOS API names begin with Cy_BLE_AIOS_. In addition to this, the API
* also append the GATT role initial letter in the API name.
*
* \defgroup group_ble_service_api_AIOS_server_client AIOS Server and Client Function
* \ingroup group_ble_service_api_AIOS
* \brief
* These are API common to both GATT Client role and GATT Server role.
* You may use them in either roles.
*
* No letter is appended to the API name: Cy_BLE_AIOS_
*
* \defgroup group_ble_service_api_AIOS_server AIOS Server Functions
* \ingroup group_ble_service_api_AIOS
* \brief
* API unique to AIOS designs configured as a GATT Server role.
*
* A letter 's' is appended to the API name: Cy_BLE_AIOSS_
*
* \defgroup group_ble_service_api_AIOS_client AIOS Client Functions
* \ingroup group_ble_service_api_AIOS
* \brief
* API unique to AIOS designs configured as a GATT Client role.
*
* A letter 'c' is appended to the API name: Cy_BLE_AIOSC_
*
* \defgroup group_ble_service_api_AIOS_definitions AIOS Definitions and Data Structures
* \ingroup group_ble_service_api_AIOS
* \brief
* Contains the AIOS specific definitions and data structures used
* in the AIOS API.
*
*
* \defgroup group_ble_service_api_BAS Battery Service (BAS)
* \ingroup group_ble_service_api
* \brief
* The Battery Service exposes the battery level of a single battery
* or set of batteries in a device.
*
* Depending on the chosen GATT role in the Bluetooth Configurator, you may
* use a subset of the supported API.
*
* The BAS API names begin with Cy_BLE_BAS_. In addition to this, the API
* also append the GATT role initial letter in the API name.
*
* \defgroup group_ble_service_api_BAS_server_client BAS Server and Client Function
* \ingroup group_ble_service_api_BAS
* \brief
* These are API common to both GATT Client role and GATT Server role.
* You may use them in either roles.
*
* No letter is appended to the API name: Cy_BLE_BAS_
*
* \defgroup group_ble_service_api_BAS_server BAS Server Functions
* \ingroup group_ble_service_api_BAS
* \brief
* API unique to BAS designs configured as a GATT Server role.
*
* A letter 's' is appended to the API name: Cy_BLE_BASS_
*
* \defgroup group_ble_service_api_BAS_client BAS Client Functions
* \ingroup group_ble_service_api_BAS
* \brief
* API unique to BAS designs configured as a GATT Client role.
*
* A letter 'c' is appended to the API name: Cy_BLE_BASC_
*
* \defgroup group_ble_service_api_BAS_definitions BAS Definitions and Data Structures
* \ingroup group_ble_service_api_BAS
* \brief
* Contains the BAS specific definitions and data structures used
* in the BAS API.
*
*
*
* \defgroup group_ble_service_api_BCS Body Composition Service (BCS)
* \ingroup group_ble_service_api
* \brief
* The Body Composition Service exposes data related to body composition from a body composition analyzer (Server)
* intended for consumer healthcare as well as sports/fitness applications.
*
* Depending on the chosen GATT role in the Bluetooth Configurator, you may use a subset of the supported API.
*
* The BCS API names begin with Cy_BLE_BCS_. In addition to this, the API also append the GATT role initial letter in the
* API name.
*
* \defgroup group_ble_service_api_BCS_server_client BCS Server and Client Function
* \ingroup group_ble_service_api_BCS
* \brief
* These are API common to both GATT Client role and GATT Server role. You may use them in either roles.
*
* No letter is appended to the API name: Cy_BLE_BCS_
*
* \defgroup group_ble_service_api_BCS_server BCS Server Functions
* \ingroup group_ble_service_api_BCS
* \brief
* API unique to BCS designs configured as a GATT Server role.
*
* A letter 's' is appended to the API name: Cy_BLE_BCSS_
*
* \defgroup group_ble_service_api_BCS_client BCS Client Functions
* \ingroup group_ble_service_api_BCS
* \brief
* API unique to BCS designs configured as a GATT Client role.
*
* A letter 'c' is appended to the API name: Cy_BLE_BCSC_
*
* \defgroup group_ble_service_api_BCS_definitions BCS Definitions and Data Structures
* \ingroup group_ble_service_api_BCS
* \brief
* Contains the BCS specific definitions and data structures used in the BCS API.
*
*
*
* \defgroup group_ble_service_api_BLS Blood Pressure Service (BLS)
* \ingroup group_ble_service_api
* \brief
* The Blood Pressure Service exposes blood pressure and other data related
* to a non-invasive blood pressure monitor for consumer and professional
* healthcare applications.
*
* Depending on the chosen GATT role in the Bluetooth Configurator, you may
* use a subset of the supported API.
*
* The BLS API names begin with Cy_BLE_BLS_. In addition to this, the API
* also append the GATT role initial letter in the API name.
*
* \defgroup group_ble_service_api_BLS_server_client BLS Server and Client Function
* \ingroup group_ble_service_api_BLS
* \brief
* These are API common to both GATT Client role and GATT Server role.
* You may use them in either roles.
*
* No letter is appended to the API name: Cy_BLE_BLS_
*
* \defgroup group_ble_service_api_BLS_server BLS Server Functions
* \ingroup group_ble_service_api_BLS
* \brief
* API unique to BLS designs configured as a GATT Server role.
*
* A letter 's' is appended to the API name: Cy_BLE_BLSS_
*
* \defgroup group_ble_service_api_BLS_client BLS Client Functions
* \ingroup group_ble_service_api_BLS
* \brief
* API unique to BLS designs configured as a GATT Client role.
*
* A letter 'c' is appended to the API name: Cy_BLE_BLSC_
*
* \defgroup group_ble_service_api_BLS_definitions BLS Definitions and Data Structures
* \ingroup group_ble_service_api_BLS
* \brief
* Contains the BLS specific definitions and data structures
* used in the BLS API.
*
*
*
* \defgroup group_ble_service_api_BMS Bond Management Service (BMS)
* \ingroup group_ble_service_api
* \brief
* The Bond Management Service defines how a peer Bluetooth device can manage the storage of bond information, especially
* the deletion of it, on the Bluetooth device supporting this service.
*
* Depending on the chosen GATT role in the Bluetooth Configurator, you may use a subset of the supported API.
*
* The BMS API names begin with Cy_BLE_BMS_. In addition to this, the API also append the GATT role initial letter in the
* API name.
*
* \defgroup group_ble_service_api_BMS_server_client BMS Server and Client Function
* \ingroup group_ble_service_api_BMS
* \brief
* These are API common to both GATT Client role and GATT Server role. You may use them in either roles.
*
* No letter is appended to the API name: Cy_BLE_BMS_
*
* \defgroup group_ble_service_api_BMS_server BMS Server Functions
* \ingroup group_ble_service_api_BMS
* \brief
* API unique to BMS designs configured as a GATT Server role.
*
* A letter 's' is appended to the API name: Cy_BLE_BMSS_
*
* \defgroup group_ble_service_api_BMS_client BMS Client Functions
* \ingroup group_ble_service_api_BMS
* \brief
* API unique to BMS designs configured as a GATT Client role.
*
* A letter 'c' is appended to the API name: Cy_BLE_BMSC_
*
* \defgroup group_ble_service_api_BMS_definitions BMS Definitions and Data Structures
* \ingroup group_ble_service_api_BMS
* \brief
* Contains the BMS specific definitions and data structures used in the BMS API.
*
*
*
* \defgroup group_ble_service_api_CGMS Continuous Glucose Monitoring Service (CGMS)
* \ingroup group_ble_service_api
* \brief
* The Continuous Glucose Monitoring Service exposes glucose measurement and other data related to a personal CGM sensor
* for healthcare applications.
*
* Depending on the chosen GATT role in the Bluetooth Configurator, you may use a subset of the supported API.
*
* The CGMS API names begin with Cy_BLE_CGMS_. In addition to this, the API also append the GATT role initial letter in the
* API name.
*
* \defgroup group_ble_service_api_CGMS_server_client CGMS Server and Client Function
* \ingroup group_ble_service_api_CGMS
* \brief
* These are API common to both GATT Client role and GATT Server role. You may use them in either roles.
*
* No letter is appended to the API name: Cy_BLE_CGMS_
*
* \defgroup group_ble_service_api_CGMS_server CGMS Server Functions
* \ingroup group_ble_service_api_CGMS
* \brief
* API unique to CGMS designs configured as a GATT Server role.
*
* A letter 's' is appended to the API name: Cy_BLE_CGMSS_
*
* \defgroup group_ble_service_api_CGMS_client CGMS Client Functions
* \ingroup group_ble_service_api_CGMS
* \brief
* API unique to CGMS designs configured as a GATT Client role.
*
* A letter 'c' is appended to the API name: Cy_BLE_CGMSC_
*
* \defgroup group_ble_service_api_CGMS_definitions CGMS Definitions and Data Structures
* \ingroup group_ble_service_api_CGMS
* \brief
* Contains the CGMS specific definitions and data structures used in the CGMS API.
*
*
*
* \defgroup group_ble_service_api_CPS Cycling Power Service (CPS)
* \ingroup group_ble_service_api
* \brief
* The Cycling Power Service (CPS) exposes power- and force-related
* data and optionally speed- and cadence-related data from a Cycling
* Power sensor (GATT Server) intended for sports and fitness applications.
*
* Depending on the chosen GATT role in the Bluetooth Configurator, you may
* use a subset of the supported API.
*
* The CPS API names begin with Cy_BLE_CPS_. In addition to this, the API
* also append the GATT role initial letter in the API name.
*
*
* \defgroup group_ble_service_api_CPS_server_client CPS Server and Client Function
* \ingroup group_ble_service_api_CPS
* \brief
* These are API common to both GATT Client role and GATT Server role.
* You may use them in either roles.
*
* No letter is appended to the API name: Cy_BLE_CPS_
*
* \defgroup group_ble_service_api_CPS_server CPS Server Functions
* \ingroup group_ble_service_api_CPS
* \brief
* API unique to CPS designs configured as a GATT Server role.
*
* A letter 's' is appended to the API name: Cy_BLE_CPSS_
*
* \defgroup group_ble_service_api_CPS_client CPS Client Functions
* \ingroup group_ble_service_api_CPS
* \brief
* API unique to CPS designs configured as a GATT Client role.
*
* A letter 'c' is appended to the API name: Cy_BLE_CPSC_
*
* \defgroup group_ble_service_api_CPS_definitions CPS Definitions and Data Structures
* \ingroup group_ble_service_api_CPS
* \brief
* Contains the CPS specific definitions and data structures
* used in the CPS API.
*
*
* \defgroup group_ble_service_api_CSCS Cycling Speed and Cadence Service (CSCS)
* \ingroup group_ble_service_api
* \brief
* The Cycling Speed and Cadence (CSC) Service exposes speed-related
* data and/or cadence-related data while using the Cycling Speed
* and Cadence sensor (Server).
*
* Depending on the chosen GATT role in the Bluetooth Configurator, you may
* use a subset of the supported API.
*
* The CSCS API names begin with Cy_BLE_CSCS_. In addition to this, the API
* also append the GATT role initial letter in the API name.
*
*
* \defgroup group_ble_service_api_CSCS_server_client CSCS Server and Client Function
* \ingroup group_ble_service_api_CSCS
* \brief
* These are API common to both GATT Client role and GATT Server role.
* You may use them in either roles.
*
* No letter is appended to the API name: Cy_BLE_CSCS_
*
* \defgroup group_ble_service_api_CSCS_server CSCS Server Functions
* \ingroup group_ble_service_api_CSCS
* \brief
* API unique to CSCS designs configured as a GATT Server role.
*
* A letter 's' is appended to the API name: Cy_BLE_CSCSS_
*
* \defgroup group_ble_service_api_CSCS_client CSCS Client Functions
* \ingroup group_ble_service_api_CSCS
* \brief
* API unique to CSCS designs configured as a GATT Client role.
*
* A letter 'c' is appended to the API name: Cy_BLE_CSCSC_
*
* \defgroup group_ble_service_api_CSCS_definitions CSCS Definitions and Data Structures
* \ingroup group_ble_service_api_CSCS
* \brief
* Contains the CSCS specific definitions and data structures
* used in the CSCS API.
*
*
* \defgroup group_ble_service_api_CTS Current Time Service (CTS)
* \ingroup group_ble_service_api
* \brief
* The Current Time Service defines how a Bluetooth device can expose time information
* to other Bluetooth devices.
*
* Depending on the chosen GATT role in the Bluetooth Configurator, you may
* use a subset of the supported API.
*
* The CTS API names begin with Cy_BLE_CTS_. In addition to this, the API
* also append the GATT role initial letter in the API name.
*
* \defgroup group_ble_service_api_CTS_server_client CTS Server and Client Function
* \ingroup group_ble_service_api_CTS
* \brief
* These are API common to both GATT Client role and GATT Server role.
* You may use them in either roles.
*
* No letter is appended to the API name: Cy_BLE_CTS_
*
* \defgroup group_ble_service_api_CTS_server CTS Server Functions
* \ingroup group_ble_service_api_CTS
* \brief
* API unique to CTS designs configured as a GATT Server role.
*
* A letter 's' is appended to the API name: Cy_BLE_CTSS_
*
* \defgroup group_ble_service_api_CTS_client CTS Client Functions
* \ingroup group_ble_service_api_CTS
* \brief
* API unique to CTS designs configured as a GATT Client role.
*
* A letter 'c' is appended to the API name: Cy_BLE_CTSC_
*
* \defgroup group_ble_service_api_CTS_definitions CTS Definitions and Data Structures
* \ingroup group_ble_service_api_CTS
* \brief
* Contains the CTS specific definitions and data structures
* used in the CTS API.
*
*
* \defgroup group_ble_service_api_DIS Device Information Service (DIS)
* \ingroup group_ble_service_api
* \brief
* The Device Information Service exposes manufacturer and/or
* vendor information about a device.
*
* Depending on the chosen GATT role in the Bluetooth Configurator, you may
* use a subset of the supported API.
*
* The DIS API names begin with Cy_BLE_DIS_. In addition to this, the API
* also append the GATT role initial letter in the API name.
*
* \defgroup group_ble_service_api_DIS_server_client DIS Server and Client Function
* \ingroup group_ble_service_api_DIS
* \brief
* These are API common to both GATT Client role and GATT Server role.
* You may use them in either roles.
*
* No letter is appended to the API name: Cy_BLE_DIS_
*
* \defgroup group_ble_service_api_DIS_server DIS Server Functions
* \ingroup group_ble_service_api_DIS
* \brief
* API unique to DIS designs configured as a GATT Server role.
*
* A letter 's' is appended to the API name: Cy_BLE_DISS_
*
* \defgroup group_ble_service_api_DIS_client DIS Client Functions
* \ingroup group_ble_service_api_DIS
* \brief
* API unique to DIS designs configured as a GATT Client role.
*
* A letter 'c' is appended to the API name: Cy_BLE_DISC_
*
* \defgroup group_ble_service_api_DIS_definitions DIS Definitions and Data Structures
* \ingroup group_ble_service_api_DIS
* \brief
* Contains the DIS specific definitions and data structures
* used in the DIS API.
*
*
*
* \defgroup group_ble_service_api_ESS Environmental Sensing Service (ESS)
* \ingroup group_ble_service_api
* \brief
* The Environmental Sensing Service exposes measurement data from an environmental sensor intended for sports and fitness
* applications.
*
* Depending on the chosen GATT role in the Bluetooth Configurator, you may use a subset of the supported API.
*
* The ESS API names begin with Cy_BLE_ESS_. In addition to this, the API also append the GATT role initial letter in the
* API name.
*
* \defgroup group_ble_service_api_ESS_server_client ESS Server and Client Function
* \ingroup group_ble_service_api_ESS
* \brief
* These are API common to both GATT Client role and GATT Server role. You may use them in either roles.
*
* No letter is appended to the API name: Cy_BLE_ESS_
*
* \defgroup group_ble_service_api_ESS_server ESS Server Functions
* \ingroup group_ble_service_api_ESS
* \brief
* API unique to ESS designs configured as a GATT Server role.
*
* A letter 's' is appended to the API name: Cy_BLE_ESSS_
*
* \defgroup group_ble_service_api_ESS_client ESS Client Functions
* \ingroup group_ble_service_api_ESS
* \brief
* API unique to ESS designs configured as a GATT Client role.
*
* A letter 'c' is appended to the API name: Cy_BLE_ESSC_
*
* \defgroup group_ble_service_api_ESS_definitions ESS Definitions and Data Structures
* \ingroup group_ble_service_api_ESS
* \brief
* Contains the ESS specific definitions and data structures used in the ESS API.
*
*
*
* \defgroup group_ble_service_api_GLS Glucose Service (GLS)
* \ingroup group_ble_service_api
* \brief
* The Glucose Service exposes glucose and other data related to
* a personal glucose sensor for consumer healthcare applications
* and is not designed for clinical use.
*
* Depending on the chosen GATT role in the Bluetooth Configurator, you may
* use a subset of the supported API.
*
* The GLS API names begin with Cy_BLE_GLS_. In addition to this, the API
* also append the GATT role initial letter in the API name.
*
* \defgroup group_ble_service_api_GLS_server_client GLS Server and Client Function
* \ingroup group_ble_service_api_GLS
* \brief
* These are API common to both GATT Client role and GATT Server role.
* You may use them in either roles.
*
* No letter is appended to the API name: Cy_BLE_GLS_
*
* \defgroup group_ble_service_api_GLS_server GLS Server Functions
* \ingroup group_ble_service_api_GLS
* \brief
* API unique to GLS designs configured as a GATT Server role.
*
* A letter 's' is appended to the API name: Cy_BLE_GLSS_
*
* \defgroup group_ble_service_api_GLS_client GLS Client Functions
* \ingroup group_ble_service_api_GLS
* \brief
* API unique to GLS designs configured as a GATT Client role.
*
* A letter 'c' is appended to the API name: Cy_BLE_GLSC_
*
* \defgroup group_ble_service_api_GLS_definitions GLS Definitions and Data Structures
* \ingroup group_ble_service_api_GLS
* \brief
* Contains the GLS specific definitions and data structures
* used in the GLS API.
*
*
*
* \defgroup group_ble_service_api_HIDS HID Service (HIDS)
* \ingroup group_ble_service_api
* \brief
* The HID Service exposes data and associated formatting for
* HID Devices and HID Hosts.
*
* Depending on the chosen GATT role in the Bluetooth Configurator, you may
* use a subset of the supported API.
*
* The HID API names begin with Cy_BLE_HID. In addition to this, the API
* also append the GATT role initial letter in the API name.
*
* \defgroup group_ble_service_api_HIDS_server_client HIDS Server and Client Functions
* \ingroup group_ble_service_api_HIDS
* \brief
* These are API common to both GATT Client role and GATT Server role.
* You may use them in either roles.
*
* No letter is appended to the API name: Cy_BLE_HIDS_
*
* \defgroup group_ble_service_api_HIDS_server HIDS Server Functions
* \ingroup group_ble_service_api_HIDS
* \brief
* API unique to HID designs configured as a GATT Server role.
*
* A letter 's' is appended to the API name: Cy_BLE_HIDSS_
*
* \defgroup group_ble_service_api_HIDS_client HIDS Client Functions
* \ingroup group_ble_service_api_HIDS
* \brief
* API unique to HID designs configured as a GATT Client role.
*
* A letter 'c' is appended to the API name: Cy_BLE_HIDSC_
*
* \defgroup group_ble_service_api_HIDS_definitions HIDS Definitions and Data Structures
* \ingroup group_ble_service_api_HIDS
* \brief
* Contains the HID specific definitions and data structures
* used in the HID API.
*
*
*
* \defgroup group_ble_service_api_HRS Heart Rate Service (HRS)
* \ingroup group_ble_service_api
* \brief
* The Heart Rate Service exposes heart rate and other data
* related to a heart rate sensor intended for fitness applications.
*
* Depending on the chosen GATT role in the Bluetooth Configurator, you may
* use a subset of the supported API.
*
* The HRS API names begin with Cy_BLE_HRS_. In addition to this, the API
* also append the GATT role initial letter in the API name.
*
* \defgroup group_ble_service_api_HRS_server_client HRS Server and Client Function
* \ingroup group_ble_service_api_HRS
* \brief
* These are API common to both GATT Client role and GATT Server role.
* You may use them in either roles.
*
* No letter is appended to the API name: Cy_BLE_HRS_
*
* \defgroup group_ble_service_api_HRS_server HRS Server Functions
* \ingroup group_ble_service_api_HRS
* \brief
* API unique to HRS designs configured as a GATT Server role.
*
* A letter 's' is appended to the API name: Cy_BLE_HRSS_
*
* \defgroup group_ble_service_api_HRS_client HRS Client Functions
* \ingroup group_ble_service_api_HRS
* \brief
* API unique to HRS designs configured as a GATT Client role.
*
* A letter 'c' is appended to the API name: Cy_BLE_HRSC_
*
* \defgroup group_ble_service_api_HRS_definitions HRS Definitions and Data Structures
* \ingroup group_ble_service_api_HRS
* \brief
* Contains the HRS specific definitions and data structures
* used in the HRS API.
*
*
*
* \defgroup group_ble_service_api_HPS HTTP Proxy Service (HPS)
* \ingroup group_ble_service_api
* \brief
* The HTTP Proxy Service allows a Client device, typically a sensor,
* to communicate with a Web Server through a gateway device.
*
* Depending on the chosen GATT role in the Bluetooth Configurator, you may
* use a subset of the supported API.
*
* The HPS API names begin with Cy_BLE_HPS_. In addition to this, the API
* also append the GATT role initial letter in the API name.
*
* \defgroup group_ble_service_api_HPS_server_client HPS Server and Client Function
* \ingroup group_ble_service_api_HPS
* \brief
* These are API common to both GATT Client role and GATT Server role.
* You may use them in either roles.
*
* No letter is appended to the API name: Cy_BLE_HPS_
*
* \defgroup group_ble_service_api_HPS_server HPS Server Functions
* \ingroup group_ble_service_api_HPS
* \brief
* API unique to HPS designs configured as a GATT Server role.
*
* A letter 's' is appended to the API name: Cy_BLE_HPSS_
*
* \defgroup group_ble_service_api_HPS_client HPS Client Functions
* \ingroup group_ble_service_api_HPS
* \brief
* API unique to HPS designs configured as a GATT Client role.
*
* A letter 'c' is appended to the API name: Cy_BLE_HPSC_
*
* \defgroup group_ble_service_api_HPS_definitions HPS Definitions and Data Structures
* \ingroup group_ble_service_api_HPS
* \brief
* Contains the HPS specific definitions and data structures
* used in the HPS API.
*
*
*
* \defgroup group_ble_service_api_HTS Health Thermometer Service (HTS)
* \ingroup group_ble_service_api
* \brief
* The Health Thermometer Service exposes temperature and other
* data related to a thermometer used for healthcare applications.
*
* Depending on the chosen GATT role in the Bluetooth Configurator, you may
* use a subset of the supported API.
*
* The HTS API names begin with Cy_BLE_HTS_. In addition to this, the API
* also append the GATT role initial letter in the API name.
*
* \defgroup group_ble_service_api_HTS_server_client HTS Server and Client Function
* \ingroup group_ble_service_api_HTS
* \brief
* These are API common to both GATT Client role and GATT Server role.
* You may use them in either roles.
*
* No letter is appended to the API name: Cy_BLE_HTS_
*
* \defgroup group_ble_service_api_HTS_server HTS Server Functions
* \ingroup group_ble_service_api_HTS
* \brief
* API unique to HTS designs configured as a GATT Server role.
*
* A letter 's' is appended to the API name: Cy_BLE_HTSS_
*
* \defgroup group_ble_service_api_HTS_client HTS Client Functions
* \ingroup group_ble_service_api_HTS
* \brief
* API unique to HTS designs configured as a GATT Client role.
*
* A letter 'c' is appended to the API name: Cy_BLE_HTSC_
*
* \defgroup group_ble_service_api_HTS_definitions HTS Definitions and Data Structures
* \ingroup group_ble_service_api_HTS
* \brief
* Contains the HTS specific definitions and data structures
* used in the HTS API.
*
*
*
* \defgroup group_ble_service_api_IAS Immediate Alert Service (IAS)
* \ingroup group_ble_service_api
* \brief
* The Immediate Alert Service exposes a control point to allow a peer device to cause the device to immediately alert.
*
* The Immediate Alert Service uses the Alert Level Characteristic
* to cause an alert when it is written with a value other than "No Alert".
*
* Depending on the chosen GATT role in the Bluetooth Configurator, you may
* use a subset of the supported API.
*
* The IAS API names begin with Cy_BLE_IAS_. In addition to this, the API
* also append the GATT role initial letter in the API name.
*
* \defgroup group_ble_service_api_IAS_server_client IAS Server and Client Function
* \ingroup group_ble_service_api_IAS
* \brief
* These are API common to both GATT Client role and GATT Server role.
* You may use them in either roles.
*
* No letter is appended to the API name: Cy_BLE_IAS_
*
* \defgroup group_ble_service_api_IAS_server IAS Server Functions
* \ingroup group_ble_service_api_IAS
* \brief
* API unique to IAS designs configured as a GATT Server role.
*
* A letter 's' is appended to the API name: Cy_BLE_IASS_
*
* \defgroup group_ble_service_api_IAS_client IAS Client Functions
* \ingroup group_ble_service_api_IAS
* \brief
* API unique to IAS designs configured as a GATT Client role.
*
* A letter 'c' is appended to the API name: Cy_BLE_IASC_
*
* \defgroup group_ble_service_api_IAS_definitions IAS Definitions and Data Structures
* \ingroup group_ble_service_api_IAS
* \brief
* Contains the IAS specific definitions and data structures
* used in the IAS API.
*
*
*
* \defgroup group_ble_service_api_IPS Indoor Positioning Service (IPS)
* \ingroup group_ble_service_api
* \brief
* The Indoor Positioning exposes coordinates and other location related information via
* an advertisement or indicates that the device address can be used for location look-up,
* enabling mobile devices to find their position.
*
* Depending on the chosen GATT role in the Bluetooth Configurator, you may
* use a subset of the supported API.
*
* The IPS API names begin with Cy_BLE_IPS_. In addition to this, the API
* also append the GATT role initial letter in the API name.
*
* \defgroup group_ble_service_api_IPS_server_client IPS Server and Client Function
* \ingroup group_ble_service_api_IPS
* \brief
* These are API common to both GATT Client role and GATT Server role.
* You may use them in either roles.
*
* No letter is appended to the API name: Cy_BLE_IPS_
*
* \defgroup group_ble_service_api_IPS_server IPS Server Functions
* \ingroup group_ble_service_api_IPS
* \brief
* API unique to IPS designs configured as a GATT Server role.
*
* A letter 's' is appended to the API name: Cy_BLE_IPSS_
*
* \defgroup group_ble_service_api_IPS_client IPS Client Functions
* \ingroup group_ble_service_api_IPS
* \brief
* API unique to IPS designs configured as a GATT Client role.
*
* A letter 'c' is appended to the API name: Cy_BLE_IPSC_
*
* \defgroup group_ble_service_api_IPS_definitions IPS Definitions and Data Structures
* \ingroup group_ble_service_api_IPS
* \brief
* Contains the IPS specific definitions and data structures
* used in the IPS API.
*
*
*
* \defgroup group_ble_service_api_LLS Link Loss Service (LLS)
* \ingroup group_ble_service_api
* \brief
* The Link Loss Service uses the Alert Level Characteristic to
* cause an alert in the device when the link is lost.
*
* Depending on the chosen GATT role in the Bluetooth Configurator, you may
* use a subset of the supported API.
*
* The LLS API names begin with Cy_BLE_LLS_. In addition to this, the API
* also append the GATT role initial letter in the API name.
*
* \defgroup group_ble_service_api_LLS_server_client LLS Server and Client Function
* \ingroup group_ble_service_api_LLS
* \brief
* These are API common to both GATT Client role and GATT Server role.
* You may use them in either roles.
*
* No letter is appended to the API name: Cy_BLE_LLS_
*
* \defgroup group_ble_service_api_LLS_server LLS Server Functions
* \ingroup group_ble_service_api_LLS
* \brief
* API unique to LLS designs configured as a GATT Server role.
*
* A letter 's' is appended to the API name: Cy_BLE_LLSS_
*
* \defgroup group_ble_service_api_LLS_client LLS Client Functions
* \ingroup group_ble_service_api_LLS
* \brief
* API unique to LLS designs configured as a GATT Client role.
*
* A letter 'c' is appended to the API name: Cy_BLE_LLSC_
*
* \defgroup group_ble_service_api_LLS_definitions LLS Definitions and Data Structures
* \ingroup group_ble_service_api_LLS
* \brief
* Contains the LLS specific definitions and data structures
* used in the LLS API.
*
*
*
* \defgroup group_ble_service_api_LNS Location and Navigation Service (LNS)
* \ingroup group_ble_service_api
* \brief
* The Location and Navigation Service exposes location and
* navigation-related data from a Location and Navigation sensor
* (Server) intended for outdoor activity applications.
*
* Depending on the chosen GATT role in the Bluetooth Configurator, you may
* use a subset of the supported API.
*
* The LNS API names begin with Cy_BLE_LNS_. In addition to this, the API
* also append the GATT role initial letter in the API name.
*
* \defgroup group_ble_service_api_LNS_server_client LNS Server and Client Function
* \ingroup group_ble_service_api_LNS
* \brief
* These are API common to both GATT Client role and GATT Server role.
* You may use them in either roles.
*
* No letter is appended to the API name: Cy_BLE_LNS_
*
* \defgroup group_ble_service_api_LNS_server LNS Server Functions
* \ingroup group_ble_service_api_LNS
* \brief
* API unique to LNS designs configured as a GATT Server role.
*
* A letter 's' is appended to the API name: Cy_BLE_LNSS_
*
* \defgroup group_ble_service_api_LNS_client LNS Client Functions
* \ingroup group_ble_service_api_LNS
* \brief
* API unique to LNS designs configured as a GATT Client role.
*
* A letter 'c' is appended to the API name: Cy_BLE_LNSC_
*
* \defgroup group_ble_service_api_LNS_definitions LNS Definitions and Data Structures
* \ingroup group_ble_service_api_LNS
* \brief
* Contains the LNS specific definitions and data structures
* used in the LNS API.
*
*
*
* \defgroup group_ble_service_api_NDCS Next DST Change Service (NDCS)
* \ingroup group_ble_service_api
* \brief
* The Next DST Change Service enables a BLE device that has knowledge about the
* next occurrence of a DST change to expose this information to
* another Bluetooth device. The Service uses the "Time with DST"
* Characteristic and the functions exposed in this Service are
* used to interact with that Characteristic.
*
* Depending on the chosen GATT role in the Bluetooth Configurator, you may
* use a subset of the supported API.
*
* The NDCS API names begin with Cy_BLE_NDCS_. In addition to this, the API
* also append the GATT role initial letter in the API name.
*
* \defgroup group_ble_service_api_NDCS_server_client NDCS Server and Client Functions
* \ingroup group_ble_service_api_NDCS
* \brief
* These are API common to both GATT Client role and GATT Server role.
* You may use them in either roles.
*
* No letter is appended to the API name: Cy_BLE_NDCS_
*
* \defgroup group_ble_service_api_NDCS_server NDCS Server Functions
* \ingroup group_ble_service_api_NDCS
* \brief
* API unique to NDCS designs configured as a GATT Server role.
*
* A letter 's' is appended to the API name: Cy_BLE_NDCSS_
*
* \defgroup group_ble_service_api_NDCS_client NDCS Client Functions
* \ingroup group_ble_service_api_NDCS
* \brief
* API unique to NDCS designs configured as a GATT Client role.
*
* A letter 'c' is appended to the API name: Cy_BLE_NDCSC_
*
* \defgroup group_ble_service_api_NDCS_definitions NDCS Definitions and Data Structures
* \ingroup group_ble_service_api_NDCS
* \brief
* Contains the NDCS specific definitions and data structures
* used in the NDCS API.
*
*
*
* \defgroup group_ble_service_api_PASS Phone Alert Status Service (PASS)
* \ingroup group_ble_service_api
* \brief
* The Phone Alert Status Service uses the Alert Status Characteristic
* and Ringer Setting Characteristic to expose the phone alert status
* and uses the Ringer Control Point Characteristic to control the
* phone's ringer into mute or enable.
*
* Depending on the chosen GATT role in the Bluetooth Configurator, you may
* use a subset of the supported API.
*
* The PASS API names begin with Cy_BLE_PASS_. In addition to this, the API
* also append the GATT role initial letter in the API name.
*
* \defgroup group_ble_service_api_PASS_server_client PASS Server and Client Function
* \ingroup group_ble_service_api_PASS
* \brief
* These are API common to both GATT Client role and GATT Server role.
* You may use them in either roles.
*
* No letter is appended to the API name: Cy_BLE_PASS_
*
* \defgroup group_ble_service_api_PASS_server PASS Server Functions
* \ingroup group_ble_service_api_PASS
* \brief
* API unique to PASS designs configured as a GATT Server role.
*
* A letter 's' is appended to the API name: Cy_BLE_PASSS_
*
* \defgroup group_ble_service_api_PASS_client PASS Client Functions
* \ingroup group_ble_service_api_PASS
* \brief
* API unique to PASS designs configured as a GATT Client role.
*
* A letter 'c' is appended to the API name: Cy_BLE_PASSC_
*
* \defgroup group_ble_service_api_PASS_definitions PASS Definitions and Data Structures
* \ingroup group_ble_service_api_PASS
* \brief
* Contains the PASS specific definitions and data structures
* used in the PASS API.
*
*
*
* \defgroup group_ble_service_api_PLXS Pulse Oximeter Service (PLXS)
* \ingroup group_ble_service_api
* \brief
* The Pulse Oximeter Service enables a Collector device to connect and interact with a pulse oximeter intended for healthcare applications.
*
* Depending on the chosen GATT role in the Bluetooth Configurator, you may
* use a subset of the supported API.
*
* The PLXS API names begin with Cy_BLE_PLXS_. In addition to this, the API
* also append the GATT role initial letter in the API name.
*
* \defgroup group_ble_service_api_PLXS_server_client PLXS Server and Client Function
* \ingroup group_ble_service_api_PLXS
* \brief
* These are API common to both GATT Client role and GATT Server role.
* You may use them in either roles.
*
* No letter is appended to the API name: Cy_BLE_PLXS_
*
* \defgroup group_ble_service_api_PLXS_server PLXS Server Functions
* \ingroup group_ble_service_api_PLXS
* \brief
* API unique to PLXS designs configured as a GATT Server role.
*
* A letter 's' is appended to the API name: Cy_BLE_PLXSS_
*
* \defgroup group_ble_service_api_PLXS_client PLXS Client Functions
* \ingroup group_ble_service_api_PLXS
* \brief
* API unique to PLXS designs configured as a GATT Client role.
*
* A letter 'c' is appended to the API name: Cy_BLE_PLXSC_
*
* \defgroup group_ble_service_api_PLXS_definitions PLXS Definitions and Data Structures
* \ingroup group_ble_service_api_PLXS
* \brief
* Contains the PLXS specific definitions and data structures used
* in the PLXS API.
*
*
*
* \defgroup group_ble_service_api_RSCS Running Speed and Cadence Service (RSCS)
* \ingroup group_ble_service_api
* \brief
* The Running Speed and Cadence (RSC) Service exposes speed,
* cadence and other data related to fitness applications such
* as the stride length and the total distance the user has
* travelled while using the Running Speed and Cadence sensor (Server).
*
* Depending on the chosen GATT role in the Bluetooth Configurator, you may
* use a subset of the supported API.
*
* The RSCS API names begin with Cy_BLE_RSCS_. In addition to this, the API
* also append the GATT role initial letter in the API name.
*
* \defgroup group_ble_service_api_RSCS_server_client RSCS Server and Client Functions
* \ingroup group_ble_service_api_RSCS
* \brief
* These are API common to both GATT Client role and GATT Server role.
* You may use them in either roles.
*
* No letter is appended to the API name: Cy_BLE_RSCS_
*
* \defgroup group_ble_service_api_RSCS_server RSCS Server Functions
* \ingroup group_ble_service_api_RSCS
* \brief
* API unique to RSCS designs configured as a GATT Server role.
*
* A letter 's' is appended to the API name: Cy_BLE_RSCSS_
*
* \defgroup group_ble_service_api_RSCS_client RSCS Client Functions
* \ingroup group_ble_service_api_RSCS
* \brief
* API unique to RSCS designs configured as a GATT Client role.
*
* A letter 'c' is appended to the API name: Cy_BLE_RSCSC_
*
* \defgroup group_ble_service_api_RSCS_definitions RSCS Definitions and Data Structures
* \ingroup group_ble_service_api_RSCS
* \brief
* Contains the RSCS specific definitions and data structures
* used in the RSCS API.
*
*
*
* \defgroup group_ble_service_api_RTUS Reference Time Update Service (RTUS)
* \ingroup group_ble_service_api
* \brief
* The Reference Time Update Service enables a Bluetooth device that can update the
* system time using the reference time such as a GPS receiver
* to expose a control point and expose the accuracy (drift) of
* the local system time compared to the reference time source.
*
* Depending on the chosen GATT role in the Bluetooth Configurator, you may
* use a subset of the supported API.
*
* The RTUS API names begin with Cy_BLE_RTUS_. In addition to this, the API
* also append the GATT role initial letter in the API name.
*
* \defgroup group_ble_service_api_RTUS_server_client RTUS Server and Client Function
* \ingroup group_ble_service_api_RTUS
* \brief
* These are API common to both GATT Client role and GATT Server role.
* You may use them in either roles.
*
* No letter is appended to the API name: Cy_BLE_RTUS_
*
* \defgroup group_ble_service_api_RTUS_server RTUS Server Functions
* \ingroup group_ble_service_api_RTUS
* \brief
* API unique to RTUS designs configured as a GATT Server role.
*
* A letter 's' is appended to the API name: Cy_BLE_RTUSS_
*
* \defgroup group_ble_service_api_RTUS_client RTUS Client Functions
* \ingroup group_ble_service_api_RTUS
* \brief
* API unique to RTUS designs configured as a GATT Client role.
*
* A letter 'c' is appended to the API name: Cy_BLE_RTUSC_
*
* \defgroup group_ble_service_api_RTUS_definitions RTUS Definitions and Data Structures
* \ingroup group_ble_service_api_RTUS
* \brief
* Contains the RTUS specific definitions and data structures
* used in the RTUS API.
*
*
*
* \defgroup group_ble_service_api_SCPS Scan Parameters Service (ScPS)
* \ingroup group_ble_service_api
* \brief
* The Scan Parameters Service enables a Server device to expose
* a Characteristic for the GATT Client to write its scan interval
* and scan window on the Server device, and enables a Server to
* request a refresh of the GATT Client scan interval and scan window.
*
* Depending on the chosen GATT role in the Bluetooth Configurator, you may
* use a subset of the supported API.
*
* The ScPS API names begin with Cy_BLE_SCPS_. In addition to this, the API
* also append the GATT role initial letter in the API name.
*
* \defgroup group_ble_service_api_SCPS_server_client ScPS Server and Client Functions
* \ingroup group_ble_service_api_SCPS
* \brief
* These are API common to both GATT Client role and GATT Server role.
* You may use them in either roles.
*
* No letter is appended to the API name: Cy_BLE_SCPS_
*
* \defgroup group_ble_service_api_SCPS_server ScPS Server Functions
* \ingroup group_ble_service_api_SCPS
* \brief
* API unique to ScPS designs configured as a GATT Server role.
*
* A letter 's' is appended to the API name: Cy_BLE_SCPSS_
*
* \defgroup group_ble_service_api_SCPS_client ScPS Client Functions
* \ingroup group_ble_service_api_SCPS
* \brief
* API unique to ScPS designs configured as a GATT Client role.
*
* A letter 'c' is appended to the API name: Cy_BLE_SCPSC_
*
* \defgroup group_ble_service_api_SCPS_definitions ScPS Definitions and Data Structures
* \ingroup group_ble_service_api_SCPS
* \brief
* Contains the ScPS specific definitions and data structures
* used in the ScPS API.
*
*
*
* \defgroup group_ble_service_api_TPS TX Power Service (TPS)
* \ingroup group_ble_service_api
* \brief
* The Tx Power Service uses the Tx Power Level Characteristic
* to expose the current transmit power level of a device when
* in a connection.
*
* Depending on the chosen GATT role in the Bluetooth Configurator, you may
* use a subset of the supported API.
*
* The TPS API names begin with Cy_BLE_TPS_. In addition to this, the API
* also append the GATT role initial letter in the API name.
*
* \defgroup group_ble_service_api_TPS_server_client TPS Server and Client Function
* \ingroup group_ble_service_api_TPS
* \brief
* These are API common to both GATT Client role and GATT Server role.
* You may use them in either roles.
*
* No letter is appended to the API name: Cy_BLE_TPS_
*
* \defgroup group_ble_service_api_TPS_server TPS Server Functions
* \ingroup group_ble_service_api_TPS
* \brief
* API unique to TPS designs configured as a GATT Server role.
*
* A letter 's' is appended to the API name: Cy_BLE_TPSS_
*
* \defgroup group_ble_service_api_TPS_client TPS Client Functions
* \ingroup group_ble_service_api_TPS
* \brief
* API unique to TPS designs configured as a GATT Client role.
*
* A letter 'c' is appended to the API name: Cy_BLE_TPSC_
*
* \defgroup group_ble_service_api_TPS_definitions TPS Definitions and Data Structures
* \ingroup group_ble_service_api_TPS
* \brief
* Contains the TPS specific definitions and data structures
* used in the TPS API.
*
*
*
* \defgroup group_ble_service_api_UDS User Data Service (UDS)
* \ingroup group_ble_service_api
* \brief
* The User Data Service exposes user-related data in the sports and fitness environment. This allows remote access and
* update of user data by a Client as well as the synchronization of user data between a Server and a Client.
*
* Depending on the chosen GATT role in the Bluetooth Configurator, you may use a subset of the supported API.
*
* The UDS API names begin with Cy_BLE_UDS_. In addition to this, the API also append the GATT role initial letter in the
* API name.
*
* \defgroup group_ble_service_api_UDS_server_client UDS Server and Client Function
* \ingroup group_ble_service_api_UDS
* \brief
* These are API common to both GATT Client role and GATT Server role. You may use them in either roles.
*
* No letter is appended to the API name: Cy_BLE_UDS_
*
* \defgroup group_ble_service_api_UDS_server UDS Server Functions
* \ingroup group_ble_service_api_UDS
* \brief
* API unique to UDS designs configured as a GATT Server role.
*
* A letter 's' is appended to the API name: Cy_BLE_UDSS_
*
* \defgroup group_ble_service_api_UDS_client UDS Client Functions
* \ingroup group_ble_service_api_UDS
* \brief
* API unique to UDS designs configured as a GATT Client role.
*
* A letter 'c' is appended to the API name: Cy_BLE_UDSC_
*
* \defgroup group_ble_service_api_UDS_definitions UDS Definitions and Data Structures
* \ingroup group_ble_service_api_UDS
* \brief
* Contains the UDS specific definitions and data structures used in the UDS API.
*
*
*
*
* \defgroup group_ble_service_api_WPTS Wireless Power Transfer Service (WPTS)
* \ingroup group_ble_service_api
* \brief
* The Wireless Power Transfer Service enables communication between Power Receiver Unit and Power Transmitter Unit
* in the Wireless Power Transfer systems.
*
* Depending on the chosen GATT role in the Bluetooth Configurator, you may use a subset of the supported API.
*
* The WPTS API names begin with Cy_BLE_WPTS_. In addition to this, the API also append the GATT role initial letter in the
* API name.
*
* \defgroup group_ble_service_api_WPTS_server_client WPTS Server and Client Function
* \ingroup group_ble_service_api_WPTS
* \brief
* These are API common to both GATT Client role and GATT Server role. You may use them in either roles.
*
* No letter is appended to the API name: Cy_BLE_WPTS_
*
* \defgroup group_ble_service_api_WPTS_server WPTS Server Functions
* \ingroup group_ble_service_api_WPTS
* \brief
* API unique to WPTS designs configured as a GATT Server role.
*
* A letter 's' is appended to the API name: Cy_BLE_WPTSS_
*
* \defgroup group_ble_service_api_WPTS_client WPTS Client Functions
* \ingroup group_ble_service_api_WPTS
* \brief
* API unique to WPTS designs configured as a GATT Client role.
*
* A letter 'c' is appended to the API name: Cy_BLE_WPTSC_
*
* \defgroup group_ble_service_api_WPTS_definitions WPTS Definitions and Data Structures
* \ingroup group_ble_service_api_WPTS
* \brief
* Contains the WPTS specific definitions and data structures used in the WPTS API.
*
*
*
* \defgroup group_ble_service_api_WSS Weight Scale Service (WSS)
* \ingroup group_ble_service_api
* \brief
* The Weight Scale Service exposes weight and related data from a weight scale (Server) intended for consumer healthcare
* as well as sports/fitness applications.
*
* Depending on the chosen GATT role in the Bluetooth Configurator, you may use a subset of the supported API.
*
* The WSS API names begin with Cy_BLE_WSS_. In addition to this, the API also append the GATT role initial letter in the
* API name.
*
* \defgroup group_ble_service_api_WSS_server_client WSS Server and Client Function
* \ingroup group_ble_service_api_WSS
* \brief
* These are API common to both GATT Client role and GATT Server role. You may use them in either roles.
*
* No letter is appended to the API name: Cy_BLE_WSS_
*
* \defgroup group_ble_service_api_WSS_server WSS Server Functions
* \ingroup group_ble_service_api_WSS
* \brief
* API unique to WSS designs configured as a GATT Server role.
*
* A letter 's' is appended to the API name: Cy_BLE_WSSS_
*
* \defgroup group_ble_service_api_WSS_client WSS Client Functions
* \ingroup group_ble_service_api_WSS
* \brief
* API unique to WSS designs configured as a GATT Client role.
*
* A letter 'c' is appended to the API name: Cy_BLE_WSSC_
*
* \defgroup group_ble_service_api_WSS_definitions WSS Definitions and Data Structures
* \ingroup group_ble_service_api_WSS
* \brief
* Contains the WSS specific definitions and data structures used in the WSS API.
*
*
* \defgroup group_ble_service_api_custom Custom Service
* \ingroup group_ble_service_api
* \brief
* This section contains the data structures used for Custom Services.
*
*/