Skip to content
Permalink
master
Switch branches/tags

Name already in use

A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?

fw-cyw20829b0/README.md

Go to file
 
 
Cannot retrieve contributors at this time
fw-cyw20829b0 Overview COMPONENT_BTFW-ISOC-TX0 COMPONENT_BTFW-ISOC-TX10 COMPONENT_BTFW-PAWR-TX0 COMPONENT_BTFW-PAWR-TX10 COMPONENT_BTFW-TX0 COMPONENT_BTFW-TX10
executable file 44 lines (31 sloc) 1.8 KB
Raw Blame
Open in GitHub Desktop

fw-cyw20829b0 Overview

fw-cyw20829 hosts FW patches for CYW20829B0. The patches are categorized depending on the features they support and TX Power configuration.

COMPONENT_BTFW-ISOC-TX0

Contains FW patch with ISOC support for 0dBm TX Power. This component should be used with ISOC applications. To include this component in application, add the lines provided below to application makefile:

  • DISABLE_COMPONENTS+= BTFW-TX10
  • COMPONENTS+= BTFW-ISOC-TX0

COMPONENT_BTFW-ISOC-TX10

Contains FW patch with ISOC support for 10dBm TX Power. This component should be used with ISOC applications. To include this component in application, add the lines provided below to application makefile:

  • DISABLE_COMPONENTS+= BTFW-TX10
  • COMPONENTS+= BTFW-ISOC-TX10

COMPONENT_BTFW-PAWR-TX0

Contains FW patch with PAWR support for 0dBm TX Power. This component should be used with PAWR applications. To include this component in application, add the lines provided below to application makefile:

  • DISABLE_COMPONENTS+= BTFW-TX10
  • COMPONENTS+= BTFW-PAWR-TX0

COMPONENT_BTFW-PAWR-TX10

Contains FW patch with PAWR support for 10dBm TX Power. This component should be used with PAWR applications. To include this component in application, add the lines provided below to application makefile:

  • DISABLE_COMPONENTS+= BTFW-TX10
  • COMPONENTS+= BTFW-PAWR-TX10

COMPONENT_BTFW-TX0

Contains FW patch for 0dBm TX Power. This component should be used with non-PAWR and non-ISOC applications. To include this component in application, add the lines provided below to application makefile:

  • DISABLE_COMPONENTS+= BTFW-TX10
  • COMPONENTS+= BTFW-TX0

COMPONENT_BTFW-TX10

Contains FW patch for 10dBm TX Power. This component should be used with non-PAWR and non-ISOC applications. BSP selects this component by default.

© Infineon Technologies, 2024.