Skip to content
Permalink
Machine-UART
Switch branches/tags

Name already in use

A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?
Go to file
 
 
Cannot retrieve contributors at this time
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2022 Damien P. George
* Copyright (c) 2022 Jim Mussared
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#ifndef MICROPY_INCLUDED_MIMXRT_CYW43_CONFIGPORT_H
#define MICROPY_INCLUDED_MIMXRT_CYW43_CONFIGPORT_H
// The board-level config will be included here, so it can set some CYW43 values.
#include "py/mpconfig.h"
#include "py/mperrno.h"
#include "py/mphal.h"
#include "extmod/modnetwork.h"
#include "pendsv.h"
#include "sdio.h"
#define CYW43_USE_SPI (0)
#define CYW43_LWIP (1)
#define CYW43_USE_STATS (0)
#ifndef CYW43_CHIPSET_FIRMWARE_INCLUDE_FILE
#define CYW43_CHIPSET_FIRMWARE_INCLUDE_FILE "lib/cyw43-driver/firmware/w4343WA1_7_45_98_50_combined.h"
#endif
#ifndef CYW43_WIFI_NVRAM_INCLUDE_FILE
#define CYW43_WIFI_NVRAM_INCLUDE_FILE "lib/cyw43-driver/firmware/wifi_nvram_1dx.h"
#endif
#define CYW43_IOCTL_TIMEOUT_US (1000000)
#define CYW43_SLEEP_MAX (50)
#define CYW43_NETUTILS (1)
#define CYW43_CLEAR_SDIO_INT (1)
#define CYW43_EPERM MP_EPERM // Operation not permitted
#define CYW43_EIO MP_EIO // I/O error
#define CYW43_EINVAL MP_EINVAL // Invalid argument
#define CYW43_ETIMEDOUT MP_ETIMEDOUT // Connection timed out
#define CYW43_THREAD_ENTER MICROPY_PY_LWIP_ENTER
#define CYW43_THREAD_EXIT MICROPY_PY_LWIP_EXIT
#define CYW43_THREAD_LOCK_CHECK
#define CYW43_HOST_NAME mod_network_hostname_data
#define CYW43_SDPCM_SEND_COMMON_WAIT __WFI();
#define CYW43_DO_IOCTL_WAIT __WFI();
#define CYW43_ARRAY_SIZE(a) MP_ARRAY_SIZE(a)
#define CYW43_HAL_PIN_MODE_INPUT MP_HAL_PIN_MODE_INPUT
#define CYW43_HAL_PIN_MODE_OUTPUT MP_HAL_PIN_MODE_OUTPUT
#define CYW43_HAL_PIN_PULL_NONE MP_HAL_PIN_PULL_NONE
#define CYW43_HAL_PIN_PULL_UP MP_HAL_PIN_PULL_UP
#define CYW43_HAL_PIN_PULL_DOWN MP_HAL_PIN_PULL_DOWN
#define CYW43_HAL_MAC_WLAN0 MP_HAL_MAC_WLAN0
#define cyw43_hal_ticks_us mp_hal_ticks_us
#define cyw43_hal_ticks_ms mp_hal_ticks_ms
#define cyw43_hal_pin_obj_t mp_hal_pin_obj_t
#define cyw43_hal_pin_read mp_hal_pin_read
#define cyw43_hal_pin_low mp_hal_pin_low
#define cyw43_hal_pin_high mp_hal_pin_high
#define cyw43_hal_get_mac mp_hal_get_mac
#define cyw43_hal_get_mac_ascii mp_hal_get_mac_ascii
#define cyw43_hal_generate_laa_mac mp_hal_generate_laa_mac
#define cyw43_delay_us mp_hal_delay_us
#define cyw43_delay_ms mp_hal_delay_ms
#define CYW43_PIN_WL_REG_ON MICROPY_HW_WL_REG_ON
#define CYW43_PIN_WL_HOST_WAKE MICROPY_HW_WL_HOST_WAKE
#define CYW43_PIN_WL_SDIO_1 MICROPY_HW_SDIO_D1
#define CYW43_PIN_BT_REG_ON MICROPY_HW_BT_REG_ON
#ifdef MICROPY_HW_BT_HOST_WAKE
#define CYW43_PIN_BT_HOST_WAKE MICROPY_HW_BT_HOST_WAKE
#endif
#ifdef MICROPY_HW_BT_DEV_WAKE
#define CYW43_PIN_BT_DEV_WAKE MICROPY_HW_BT_DEV_WAKE
#endif
#ifdef MICROPY_HW_BT_CTS
#define CYW43_PIN_BT_CTS MICROPY_HW_BT_CTS
#endif
#if MICROPY_HW_ENABLE_RF_SWITCH
#define CYW43_PIN_WL_RFSW_VDD pin_WL_RFSW_VDD
#endif
#define cyw43_schedule_internal_poll_dispatch(func) pendsv_schedule_dispatch(PENDSV_DISPATCH_CYW43, func)
static inline void cyw43_hal_pin_config(cyw43_hal_pin_obj_t pin, uint8_t mode, uint8_t pull, uint8_t alt) {
machine_pin_set_mode(pin, mode);
}
static inline void cyw43_hal_pin_config_irq_falling(cyw43_hal_pin_obj_t pin, int enable) {
if (enable) {
machine_pin_config(pin, PIN_MODE_IT_FALLING, PIN_PULL_UP_100K, 0, 0, PIN_AF_MODE_ALT5);
}
}
static inline void cyw43_sdio_init(void) {
sdio_init(NVIC_EncodePriority(NVIC_PRIORITYGROUP_4, 14, 0));
}
static inline void cyw43_sdio_reinit(void) {
sdio_reenable();
}
static inline void cyw43_sdio_deinit(void) {
sdio_deinit();
}
static inline void cyw43_sdio_set_irq(bool enable) {
sdio_enable_irq(enable);
}
static inline void cyw43_sdio_enable_high_speed_4bit(void) {
sdio_enable_high_speed_4bit();
}
static inline int cyw43_sdio_transfer(uint32_t cmd, uint32_t arg, uint32_t *resp) {
return sdio_transfer(cmd, arg, resp);
}
static inline int cyw43_sdio_transfer_cmd53(bool write, uint32_t block_size, uint32_t arg, size_t len, uint8_t *buf) {
return sdio_transfer_cmd53(write, block_size, arg, len, buf);
}
#define CYW43_EVENT_POLL_HOOK MICROPY_EVENT_POLL_HOOK
#endif // MICROPY_INCLUDED_MIMXRT_CYW43_CONFIGPORT_H