Permalink
Cannot retrieve contributors at this time
Name already in use
A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?
mtb-bsp-manifest/mtb-bsp-manifest-fv2.xml
Go to fileThis commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
3150 lines (3149 sloc)
269 KB
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| <boards> | |
| <board default_location="local"> | |
| <id>CYW943907AEVAL1F</id> | |
| <category>AIROC™ Connectivity BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_CYW943907AEVAL1F</board_uri> | |
| <chips> | |
| <mcu>CYW43907KWBG</mcu> | |
| </chips> | |
| <name>CYW943907AEVAL1F</name> | |
| <summary>The CYW943907AEVAL1F Evaluation kit enables you to evaluate and develop single-chip Wi-Fi applications using CYW43907 devices. The kit uses a module based on CYW43907 device. CYW43907 is a single-chip 802.11n dual-band (2.4 GHz and 5 GHz) Wi-Fi SoC that features 320-MHz Arm® Cortex®-R4 MCU for application subsystem and various on-chip interfaces like Ethernet (RMII/MII), UART, SPI/QSPI and I2C that in totality offers a very small-footprint IoT solution.</summary> | |
| <prov_capabilities>anycloud arduino ble bt cat4 cyw943907aeval1f dma flash_0k hal i2c led low_power lptimer mcu_gp spi sram_2048k switch uart wifi</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>CYW43907 based module</li> <li>On-board PCB antenna with an option to connect external antenna</li> <li>Arduino compatible headers for hardware expansion</li> <li>Custom header to bring out additional GPIOs (WICED header)</li> <li>User switches and LEDs</li> <li>On-board programmer and debugger using USB interface and USB-UART bridge</li> <li>RJ45 connector for Ethernet</li> <li>5 V to 12 V input using USB connector or power jack</li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>CYW943907AEVAL1F Evaluation board</li> <li>USB Standard-A to Micro-B cable</li> <li>Quick Start Guide</li> </ul></description> | |
| <documentation_url>https://www.cypress.com/documentation/development-kitsboards/cyw943907aeval1f-evaluation-kit</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>Latest 1.X release</num> | |
| <commit>latest-v1.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>1.1.0 release</num> | |
| <commit>release-v1.1.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>1.0.0 release</num> | |
| <commit>release-v1.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>Latest 0.X release</num> | |
| <commit>latest-v0.X</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>0.5.0 release</num> | |
| <commit>release-v0.5.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>CYW954907AEVAL1F</id> | |
| <category>AIROC™ Connectivity BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_CYW954907AEVAL1F</board_uri> | |
| <chips> | |
| <mcu>CYW54907KWBG</mcu> | |
| </chips> | |
| <name>CYW954907AEVAL1F</name> | |
| <summary>The CYW954907AEVAL1F Evaluation kit enables you to evaluate and develop single-chip Wi-Fi applications using CYW54907 devices. The kit uses a module based on CYW54907 device. CYW54907 is a single-chip 802.11n dual-band (2.4 GHz and 5 GHz) Wi-Fi SoC that features 320-MHz Arm® Cortex®-R4 MCU for application subsystem and various on-chip interfaces like Ethernet (RMII/MII), UART, SPI/QSPI and I2C that in totality offers a very small-footprint IoT solution.</summary> | |
| <prov_capabilities>anycloud arduino ble bt cat4 cyw954907aeval1f dma flash_0k hal i2c led low_power lptimer mcu_gp spi sram_2048k switch uart wifi</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>CYW54907 based module</li> <li>On-board PCB antenna with an option to connect external antenna</li> <li>Arduino compatible headers for hardware expansion</li> <li>Custom header to bring out additional GPIOs (WICED header)</li> <li>User switches and LEDs</li> <li>On-board programmer and debugger using USB interface and USB-UART bridge</li> <li>RJ45 connector for Ethernet</li> <li>5 V to 12 V input using USB connector or power jack</li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>CYW954907AEVAL1F Evaluation board</li> <li>USB Standard-A to Micro-B cable</li> <li>Quick Start Guide</li> </ul></description> | |
| <documentation_url>https://www.cypress.com/documentation/development-kitsboards/cyw954907aeval1f-evaluation-kit</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>Latest 1.X release</num> | |
| <commit>latest-v1.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>1.1.0 release</num> | |
| <commit>release-v1.1.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>1.0.0 release</num> | |
| <commit>release-v1.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>Latest 0.X release</num> | |
| <commit>latest-v0.X</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>0.5.0 release</num> | |
| <commit>release-v0.5.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>CY8CKIT-040T</id> | |
| <category>PSoC™ 4 BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_CY8CKIT-040T</board_uri> | |
| <chips> | |
| <mcu>CY8C4046LQI-T452</mcu> | |
| </chips> | |
| <name>CY8CKIT-040T</name> | |
| <summary>The PSoC&#8482; 4000T CAPSENSE&#8482; Evaluation Kit enables you to evaluate and develop with Cypress's fifth-generation, low-power CAPSENSE&#8482; solution using the PSoC&#8482; 4000T device.</summary> | |
| <prov_capabilities>bsp_gen4 capsense cat2 cy8ckit_040t enclosure flash_64k i2c led low_power mcu_gp msc_button msc_proximity msc_touchpad msclp psoc4 serial_led spi sram_8k</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>World's Most Reliable, Liquid Tolerant, Lowest Power CAPSENSE&#8482; Solution</li> <li>On-board Programmer and Debugger</li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>CY8CKIT-040T PSoC&#8482; 4000T CAPSENSE&#8482; Evaluation Board with Enclosure</li> <li>Quick Start Guide</li> <li>USB Type-A to Micro-B cable</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/CY8CKIT-040T</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="hal uart"> | |
| <num>Latest 3.X release</num> | |
| <commit>latest-v3.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="hal uart"> | |
| <num>3.1.0 release</num> | |
| <commit>release-v3.1.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>CY8CKIT-041-41XX</id> | |
| <category>PSoC™ 4 BSPs</category> | |
| <board_uri>https://github.com/cypresssemiconductorco/TARGET_CY8CKIT-041-41XX</board_uri> | |
| <chips> | |
| <mcu>CY8C4146AZI-S433</mcu> | |
| </chips> | |
| <name>CY8CKIT-041-41XX</name> | |
| <summary>The PSoC™ 4100S Pioneer Kit enables you to evaluate and develop with Cypress's fourth-generation, low-power CAPSENSE™ solution using the PSoC™ 4100S device.</summary> | |
| <prov_capabilities>adc arduino capsense capsense_button capsense_touchpad cat2 comp csd cy8ckit_041_41xx fram hal i2c j2 led lptimer mcu_gp memory memory_i2c opamp pot psoc4 rgb_led smart_io spi switch uart</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>Ready-to-Use CAPSENSE&#8482; Trackpad</li> <li>EZ-BLE PRoC module</li> <li>Potentiometer</li> <li>Rechargeable coin-cell battery</li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>CY8CKIT-041-41XX PSoC&#8482; 4100S Pioneer board</li> <li>USB Standad-A to Micro-B cable</li> <li>Water dropper</li> <li>Four press-fit connectors (for Arduino headers)</li> <li>Four jumper wires</li> <li>Quick Start Guide</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/CY8CKIT-041-41XX</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 flash_64k low_power sram_8k"> | |
| <num>Latest 3.X release</num> | |
| <commit>latest-v3.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 flash_64k low_power sram_8k"> | |
| <num>3.1.0 release</num> | |
| <commit>release-v3.1.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>3.0.0 release</num> | |
| <commit>release-v3.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>2.0.0 release</num> | |
| <commit>release-v2.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>Latest 1.X release</num> | |
| <commit>latest-v1.X</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>1.2.0 release</num> | |
| <commit>release-v1.2.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>1.1.0 release</num> | |
| <commit>release-v1.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>1.0.0 release</num> | |
| <commit>release-v1.0.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>CY8CKIT-041S-MAX</id> | |
| <category>PSoC™ 4 BSPs</category> | |
| <board_uri>https://github.com/cypresssemiconductorco/TARGET_CY8CKIT-041S-MAX</board_uri> | |
| <chips> | |
| <mcu>CY8C4149AZI-S598</mcu> | |
| </chips> | |
| <name>CY8CKIT-041S-MAX</name> | |
| <summary>The PSoC™ 4100S Max Pioneer Kit enables you to evaluate and develop with Cypress's fifth-generation, low-power CAPSENSE™ solution using the PSoC™ 4100S Max device.</summary> | |
| <prov_capabilities>adc arduino can capsense cat2 comp cy8ckit_041s_max dma flash_384k hal i2c j2 led lptimer mcu_gp memory memory_i2c msc msc_button msc_proximity msc_slider msc_touchpad opamp psoc4 smart_io spi sram_32k std_crypto switch uart</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>World's Most Reliable, Lowest Power CAPSENSE&#8482; Solution</li> <li>On-board Programmer and Debugger</li> <li>Ready-to-Use CAPSENSE&#8482; Buttons</li> <li>Ready-to-Use CAPSENSE&#8482; Touchpad</li> <li>Ready-to-Use CAPSENSE&#8482; Slider</li> <li>Ready-to-Use CAPSENSE&#8482; Proximity</li> <li>Thermistor</li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>CY8CKIT-041S-Max PSoC&#8482; 4100S Max Pioneer Board</li> <li>CY8CKIT-041S-Max Capacitive Sensing Expansion Board</li> <li>USB Type-A to Micro-B cable</li> <li>Six jumper wires</li> <li>40 pin FFC cable</li> <li>Quick Start Guide</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/CY8CKIT-041S-MAX</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 i2s low_power"> | |
| <num>Latest 3.X release</num> | |
| <commit>latest-v3.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 i2s low_power"> | |
| <num>3.1.0 release</num> | |
| <commit>release-v3.1.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>3.0.0 release</num> | |
| <commit>release-v3.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>2.0.0 release</num> | |
| <commit>release-v2.0.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>CY8CKIT-045S</id> | |
| <category>PSoC™ 4 BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_CY8CKIT-045S</board_uri> | |
| <chips> | |
| <mcu>CY8C4548AZI-S485</mcu> | |
| </chips> | |
| <name>CY8CKIT-045S</name> | |
| <summary>The PSoC™ 4500S Pioneer Kit (CY8CKIT-045S) is a low-cost hardware platform that enables design and debug of the PSoC™ 4500S device which is for power and motor control applications. The PSoC™ 4500S Pioneer Kit enables you to evaluate and develop motor control applications along with CY8CKIT-037.</summary> | |
| <prov_capabilities>adc arduino capsense capsense_button capsense_slider cat2 comp csd cy8ckit_045s dma flash_256k hal i2c j2 led lptimer mcu_gp opamp psoc4 rgb_led smart_io spi sram_32k switch uart</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>High Performance Analog with Dual ADCs <li>World's Most Reliable, Lowest Power CAPSENSE&#8482; Solution</li> <li>On-board Programmer and Debugger</li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>CY8CKIT-045S PSoC&#8482; 4500S Pioneer board</li> <li>USB Standad-A to Micro-B cable</li> <li>Six jumper wires</li> <li>Quick Start Guide</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/CY8CKIT-045S</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 low_power"> | |
| <num>Latest 3.X release</num> | |
| <commit>latest-v3.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 low_power"> | |
| <num>3.1.0 release</num> | |
| <commit>release-v3.1.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>3.0.0 release</num> | |
| <commit>release-v3.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>2.0.0 release</num> | |
| <commit>release-v2.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>Latest 1.X release</num> | |
| <commit>latest-v1.X</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>1.2.0 release</num> | |
| <commit>release-v1.2.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>1.1.0 release</num> | |
| <commit>release-v1.1.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>CY8CKIT-145-40XX</id> | |
| <category>PSoC™ 4 BSPs</category> | |
| <board_uri>https://github.com/cypresssemiconductorco/TARGET_CY8CKIT-145-40XX</board_uri> | |
| <chips> | |
| <mcu>CY8C4045AZI-S413</mcu> | |
| </chips> | |
| <name>CY8CKIT-145-40XX</name> | |
| <summary>The PSoC™ 4000S Prototyping Kit enables you to evaluate and develop with Cypress's fourth-generation, low-power CAPSENSE™ solution using the PSoC™ 4000S device.</summary> | |
| <prov_capabilities>capsense capsense_button capsense_linear_slider cat2 comp csd cy8ckit_145_40xx hal i2c j2 led mcu_gp psoc4 smart_io spi switch uart</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>World's Most Reliable, Lowest Power CAPSENSE&#8482; Solution</li> <li>On-board Programmer and Debugger</li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>CY8CKIT-145-40XX PSoC&#8482; 4000S Prototyping board</li> <li>Quick Start Guide</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/CY8CKIT-145-40XX</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 flash_32k low_power lptimer sram_4k"> | |
| <num>Latest 3.X release</num> | |
| <commit>latest-v3.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 flash_32k low_power lptimer sram_4k"> | |
| <num>3.1.0 release</num> | |
| <commit>release-v3.1.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>3.0.0 release</num> | |
| <commit>release-v3.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>2.0.0 release</num> | |
| <commit>release-v2.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>Latest 1.X release</num> | |
| <commit>latest-v1.X</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>1.2.0 release</num> | |
| <commit>release-v1.2.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>1.1.0 release</num> | |
| <commit>release-v1.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>1.0.0 release</num> | |
| <commit>release-v1.0.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>CY8CKIT-149</id> | |
| <category>PSoC™ 4 BSPs</category> | |
| <board_uri>https://github.com/cypresssemiconductorco/TARGET_CY8CKIT-149</board_uri> | |
| <chips> | |
| <mcu>CY8C4147AZI-S475</mcu> | |
| </chips> | |
| <name>CY8CKIT-149</name> | |
| <summary>The PSoC™ 4100S Plus Prototyping Kit enables you to evaluate the PSoC™ 4100S Plus device and develop with Cypress's fourth-generation, low-power CAPSENSE™ solution.</summary> | |
| <prov_capabilities>adc can capsense capsense_button capsense_linear_slider cat2 comp csd cy8ckit_149 dma flash_128k hal i2c j2 led lptimer mcu_gp opamp psoc4 smart_io spi sram_16k switch uart</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>World's Most Reliable, Lowest Power CAPSENSE&#8482; Solution</li> <li>On-board Programmer and Debugger</li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>CY8CKIT-149 PSoC&#8482; 4100S Plus Prototyping board</li> <li>Quick Start Guide</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/CY8CKIT-149</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 low_power"> | |
| <num>Latest 3.X release</num> | |
| <commit>latest-v3.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 low_power"> | |
| <num>3.1.0 release</num> | |
| <commit>release-v3.1.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>3.0.0 release</num> | |
| <commit>release-v3.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>2.0.0 release</num> | |
| <commit>release-v2.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>Latest 1.X release</num> | |
| <commit>latest-v1.X</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>1.2.0 release</num> | |
| <commit>release-v1.2.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>1.1.0 release</num> | |
| <commit>release-v1.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>1.0.0 release</num> | |
| <commit>release-v1.0.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>CY8CPROTO-040T</id> | |
| <category>PSoC™ 4 BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_CY8CPROTO-040T</board_uri> | |
| <chips> | |
| <mcu>CY8C4046LQI-T452</mcu> | |
| </chips> | |
| <name>CY8CPROTO-040T</name> | |
| <summary>The PSoC&#8482; 4000T CAPSENSE&#8482; Prototyping Kit enables you to evaluate and develop with Cypress's fifth-generation, low-power CAPSENSE&#8482; solution using the PSoC&#8482; 4000T device.</summary> | |
| <prov_capabilities>bsp_gen4 capsense cat2 cy8cproto_040t flash_64k i2c spi led low_power mcu_gp msc_button msc_proximity msc_slider msclp psoc4 sram_8k uart</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>World's Most Reliable, Lowest Power CAPSENSE&#8482; Solution</li> <li>On-board Programmer and Debugger</li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>CY8CPROTO-040T PSoC&#8482; 4000T CAPSENSE&#8482; Prototyping Kit </li> <li>Quick Start Guide</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/CY8CPROTO-040T</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.1.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>Latest 3.X release</num> | |
| <commit>latest-v3.X</commit> | |
| </version> | |
| <version tools_min_version="3.1.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>3.2.0 release</num> | |
| <commit>release-v3.2.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>EVAL_PMG1_B1_DRP</id> | |
| <category>PMG BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_EVAL_PMG1_B1_DRP</board_uri> | |
| <chips> | |
| <mcu>CYPM1116-48LQXI</mcu> | |
| </chips> | |
| <name>EVAL_PMG1_B1_DRP</name> | |
| <summary>The EVAL_PMG1_B1_DRP Prototyping kit is a development platform to design products from the EZ-PD™ PMG1-B1 USB Power Delivery (PD) microcontroller (MCU) with an integrated buck-boost battery charger. EZ-PD™ PMG1-B1 is targeted for battery-powered applications that are powered by USB-C PD such as cordless power tool chargers, wireless speakers, and portable electronics.</summary> | |
| <prov_capabilities>adc bsp_gen4 cat2 eval_pmg1_b1_drp flash_128k i2c j2 led low_power mcu_gp pmg1 pmg1_b1_cy7116 spi sram_16k switch uart usbpd</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div> <ul> <li>Support for single Port USB PD 3.1 Source/ Sink Role (DRP).</li> <li>Support 100W sink operation and 27W source operation.</li> <li>Support USB bus/DC supply/battery powered operation.</li> <li>KitProg3 based programming and debug interface.</li> <li>Access to the pins of PMG1-B1 silicon (CYPM1116-48LQXI) in hardware and support for BSP, PDL and Middleware in ModusToolbox&#8482;.</li> <li>The kit can provide a 5V/400mA supply to enable customers to power the peripherals/sensors if required. An on-board regulator from IFX can provide this power using the VBUS input. This is an optional requirement to be decided during the design phase.</li> </ul> <div class="category">Kit Contents:</div> <ul> <li>EZ-PD CYPM116-48LQXI based board</li> <li>Quick Start Guide</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/EVAL_PMG1_B1_DRP</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>Latest 3.X release</num> | |
| <commit>latest-v3.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>3.2.0 release</num> | |
| <commit>release-v3.2.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>EVAL_PMG1_S1_DRP</id> | |
| <category>PMG BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_EVAL_PMG1_S1_DRP</board_uri> | |
| <chips> | |
| <mcu>CYPM1111-40LQXIT</mcu> | |
| </chips> | |
| <name>EVAL_PMG1_S1_DRP</name> | |
| <summary>The EVAL_PMG1_S1_DRP Prototyping Kit is a development platform that enables the design and development of EZ-PD&#8482; PMG1-S1 (CYPM1111-40LQXIT) based embedded USB-C Power Delivery (PD) products which can provide/consume a high voltage power to/from USB PD port.</summary> | |
| <prov_capabilities>bsp_gen4 cat2 eval_pmg1_s1_drp flash_128k i2c led low_power mcu_gp pmg1 spi sram_12k switch uart usbpd</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div> <ul> <li>Supports USB PD DRP operation on the USB-C port.</li> <li>Supports SPR (Standard Power Range) up to 100W (20V, 5A) of power consumption as both source and sink.</li> <li>Kit can be powered from either an external DC adapter (24V) or from USB-C Bus power.</li> <li>KitProg3 based programming and debug interface.</li> <li>Access to the pins of PMG1-S1 silicon (CYPM1111-40LQXIT) in hardware and support for BSP, PDL and Middleware in Modus Toolbox.</li> <li>The kit can provide two fixed voltage supplies - 5V/2.5A and 3.3V/400mA to enable customers to power external peripherals/sensors if required.</li> </ul> <div class="category">Kit Contents:</div> <ul> <li>EZ-PD&#8482; CYPM1111-40LQXIT based board</li> <li>Quick Start Guide</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/EVAL_PMG1_S1_DRP</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>Latest 3.X release</num> | |
| <commit>latest-v3.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>3.2.0 release</num> | |
| <commit>release-v3.2.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>EVAL_PMG1_S3_DUALDRP</id> | |
| <category>PMG BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_EVAL_PMG1_S3_DUALDRP</board_uri> | |
| <chips> | |
| <mcu>CYPM1321-97BZXIT</mcu> | |
| </chips> | |
| <name>EVAL_PMG1_S3_DUALDRP</name> | |
| <summary>The EVAL_PMG1_S3_DUALDRP Prototyping Kit is a development platform that enables the design and development of EZ-PD&#8482; PMG1-S3 (CYPM1321-97BZXI)-based embedded USB-C Power Delivery (PD) products. These products are capable of providing and consuming high voltage power to/from two USB PD ports, and also require a microcontroller with CAPSENSE&#8482; capability to implement various applications.</summary> | |
| <prov_capabilities>adc bsp_gen4 capsense capsense_button capsense_linear_slider cat2 comp csd dma eval_pmg1_s3_dualdrp flash_256k hal i2c led low_power mcu_gp opamp pmg1 spi sram_32k std_crypto switch uart usb_device usbpd</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div> <ul> <li>Supports USB PD DRP operation on both the USB-C ports.</li> <li>Supports SPR (Standard Power Range) in source mode and can provide upto 100W (20V@3A) on both ports.</li> <li>Supports EPR (Extended Power Range) in sink mode up to 140W (28V@5A) power on both ports.</li> <li>Support for two self-capacitance based CAPSENSE&#8482; buttons and one 5-segment slider.</li> <li>Kit can be powered from either an external DC adapter (24V) or from USB-C Bus power. </li> <li>KitProg3 based programming and debug interface.</li> <li>Access to the pins of PMG1-S3 silicon (CYPM1321-97BZXIT) in hardware and support for BSP, PDL and Middleware in Modus Toolbox.</li> <li>The kit can provide two fixed voltage supplies - 5V/2.5A and 3.3V/400mA to enable users to power external peripherals/sensors if required. </li> <li>The kit provides an option to bypass the onboard PD regulator and connect an external PD regulator for 140W (28V@5A) source operation.</li> </ul> <div class="category">Kit Contents:</div> <ul> <li>EZ-PD&#8482; CYPM1321-97BZXIT based board</li> <li>Quick Start Guide</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/EVAL_PMG1_S3_DUALDRP</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>Latest 3.X release</num> | |
| <commit>latest-v3.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>3.2.0 release</num> | |
| <commit>release-v3.2.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>PMG1-CY7110</id> | |
| <category>PMG BSPs</category> | |
| <board_uri>https://github.com/cypresssemiconductorco/TARGET_PMG1-CY7110</board_uri> | |
| <chips> | |
| <mcu>CYPM1011-24LQXI</mcu> | |
| </chips> | |
| <name>PMG1-CY7110</name> | |
| <summary>The CY7110 EZ-PD PMG1-S0 Prototyping Kit is a low cost prototyping platform which enables design and development of EZ-PD PMG1-S0 (CYPM1011-24LQXI) based embedded applications with USB PD Sink capability.</summary> | |
| <prov_capabilities>cat2 flash_64k hal i2c j2 led mcu_gp pmg1 pmg1_cy7110 spi sram_8k switch uart usbpd</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div> <ul> <li>USB PD 3.0 compliant Sink which can support up to 100W (20V, 5A) of power consumption.</li> <li>USB bus powered operation.</li> <li>KitProg3 based programming and debug interface.</li> <li>Access to the pins of PMG1-S0 silicon (CYPM1011-24LQXI) in hardware and support for BSP, HAL, PDL and Middleware in Modus Toolbox.</li> </ul> <div class="category">Kit Contents:</div> <ul> <li>EZ-PD CYPM1011-24LQXI based board</li> <li>Quick Start Guide</li> </ul></description> | |
| <documentation_url>https://www.cypress.com/CY7110</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 low_power"> | |
| <num>Latest 3.X release</num> | |
| <commit>latest-v3.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 low_power"> | |
| <num>3.1.0 release</num> | |
| <commit>release-v3.1.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>3.0.0 release</num> | |
| <commit>release-v3.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>2.0.0 release</num> | |
| <commit>release-v2.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.3.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>Latest 1.X release</num> | |
| <commit>latest-v1.X</commit> | |
| </version> | |
| <version tools_min_version="2.3.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>1.2.0 release</num> | |
| <commit>release-v1.2.0</commit> | |
| </version> | |
| <version tools_min_version="2.3.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>1.1.0 release</num> | |
| <commit>release-v1.1.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>PMG1-CY7111</id> | |
| <category>PMG BSPs</category> | |
| <board_uri>https://github.com/cypresssemiconductorco/TARGET_PMG1-CY7111</board_uri> | |
| <chips> | |
| <mcu>CYPM1111-40LQXIT</mcu> | |
| </chips> | |
| <name>PMG1-CY7111</name> | |
| <summary>The CY7111 EZ-PD PMG1-S1 Prototyping Kit is a low cost prototyping platform which enables design and development of EZ-PD PMG1-S1 (CYPM1111-40LQXIT) based embedded applications with USB PD Sink capability.</summary> | |
| <prov_capabilities>cat2 flash_128k hal i2c j2 led mcu_gp pmg1 pmg1_cy7111 spi sram_12k switch uart usbpd</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div> <ul> <li>USB PD 3.0 compliant Sink which can support up to 100W (20V, 5A) of power consumption.</li> <li>USB bus powered operation.</li> <li>KitProg3 based programming and debug interface.</li> <li>Access to the pins of PMG1-S1 silicon (CYPM1111-40LQXIT) in hardware and support for BSP, HAL, PDL and Middleware in Modus Toolbox.</li> </ul> <div class="category">Kit Contents:</div> <ul> <li>EZ-PD CYPM1111-40LQXIT based board</li> <li>Quick Start Guide</li> </ul></description> | |
| <documentation_url>http://www.cypress.com/CY7111</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 low_power"> | |
| <num>Latest 3.X release</num> | |
| <commit>latest-v3.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 low_power"> | |
| <num>3.1.0 release</num> | |
| <commit>release-v3.1.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>3.0.0 release</num> | |
| <commit>release-v3.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>2.0.0 release</num> | |
| <commit>release-v2.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.3.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>Latest 1.X release</num> | |
| <commit>latest-v1.X</commit> | |
| </version> | |
| <version tools_min_version="2.3.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>1.2.0 release</num> | |
| <commit>release-v1.2.0</commit> | |
| </version> | |
| <version tools_min_version="2.3.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>1.1.0 release</num> | |
| <commit>release-v1.1.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>PMG1-CY7112</id> | |
| <category>PMG BSPs</category> | |
| <board_uri>https://github.com/cypresssemiconductorco/TARGET_PMG1-CY7112</board_uri> | |
| <chips> | |
| <mcu>CYPM1211-40LQXIT</mcu> | |
| </chips> | |
| <name>PMG1-CY7112</name> | |
| <summary>The CY7112 EZ-PD PMG1-S2 Prototyping Kit is a low cost prototyping platform which enables design and development of EZ-PD PMG1-S2 (CYPM1211-40LQXIT) based embedded applications with USB PD Sink capability.</summary> | |
| <prov_capabilities>cat2 flash_128k hal i2c j2 led mcu_gp pmg1 pmg1_cy7112 spi sram_8k switch uart usb_device usbpd</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div> <ul> <li>USB PD 3.0 compliant Sink which can support up to 100W (20V, 5A) of power consumption.</li> <li>USB bus powered operation.</li> <li>KitProg3 based programming and debug interface.</li> <li>Access to the pins of PMG1-S2 silicon (CYPM1211-40LQXIT) in hardware and support for BSP, HAL, PDL and Middleware in Modus Toolbox.</li> </ul> <div class="category">Kit Contents:</div> <ul> <li>EZ-PD CYPM1211-40LQXIT based board</li> <li>Quick Start Guide</li> </ul></description> | |
| <documentation_url>http://www.cypress.com/CY7112</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 low_power"> | |
| <num>Latest 3.X release</num> | |
| <commit>latest-v3.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 low_power"> | |
| <num>3.1.0 release</num> | |
| <commit>release-v3.1.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>3.0.0 release</num> | |
| <commit>release-v3.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>2.0.0 release</num> | |
| <commit>release-v2.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.3.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>Latest 1.X release</num> | |
| <commit>latest-v1.X</commit> | |
| </version> | |
| <version tools_min_version="2.3.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>1.2.0 release</num> | |
| <commit>release-v1.2.0</commit> | |
| </version> | |
| <version tools_min_version="2.3.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>1.1.0 release</num> | |
| <commit>release-v1.1.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>PMG1-CY7113</id> | |
| <category>PMG BSPs</category> | |
| <board_uri>https://github.com/cypresssemiconductorco/TARGET_PMG1-CY7113</board_uri> | |
| <chips> | |
| <mcu>CYPM1311-48LQXI</mcu> | |
| </chips> | |
| <name>PMG1-CY7113</name> | |
| <summary>The CY7113 EZ-PD PMG1-S3 Prototyping Kit is a development platform to design products which can be powered from a high-voltage USB PD port, and also need a microcontroller with CAPSENSE™ capability to implement different applications.</summary> | |
| <prov_capabilities>adc capsense capsense_button capsense_linear_slider cat2 comp csd flash_256k hal i2c j2 led mcu_gp opamp pmg1 pmg1_cy7113 spi sram_32k switch uart usb_device usbpd</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div> <ul> <li>USB PD 3.0 compliant Sink which can support up to 100W (20V, 5A) of power consumption.</li> <li>Support for two self-capacitance based CAPSENSE&#8482; buttons and one 5-segment slider.</li> <li>USB bus powered operation.</li> <li>KitProg3 based programming and debug interface.</li> <li>Access to the pins of PMG1-S3 silicon (CYPM1311-48LQXI) in hardware and support for BSP, HAL, PDL and Middleware in Modus Toolbox.</li> </ul> <div class="category">Kit Contents:</div> <ul> <li>EZ-PD CYPM1311-48LQXI based board</li> <li>Quick Start Guide</li> </ul></description> | |
| <documentation_url>http://www.cypress.com/CY7113</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 low_power"> | |
| <num>Latest 3.X release</num> | |
| <commit>latest-v3.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 low_power"> | |
| <num>3.1.0 release</num> | |
| <commit>release-v3.1.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>3.0.0 release</num> | |
| <commit>release-v3.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>2.0.0 release</num> | |
| <commit>release-v2.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.3.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>Latest 1.X release</num> | |
| <commit>latest-v1.X</commit> | |
| </version> | |
| <version tools_min_version="2.3.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>1.2.0 release</num> | |
| <commit>release-v1.2.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>PMG1S3DUAL</id> | |
| <category>PMG BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_PMG1S3DUAL</board_uri> | |
| <chips> | |
| <mcu>CYPM1322-97BZXIT</mcu> | |
| </chips> | |
| <name>PMG1S3DUAL</name> | |
| <summary>The PMG1S3DUAL BSP enables you to design and develop embedded USB-C Power Delivery (PD) applications for the PMG1-S3 device (CYPM1322-97BZXIT). The application note **AN235644 - USB PD DRP (dual-role power) schematics using EZ-PD™ PMG1 MCUs** provides a detailed information to design products which can provide/consume a high voltage power to/from USB PD port.</summary> | |
| <prov_capabilities>adc bsp_gen4 cat2 comp csd dma flash_256k i2c led lptimer mcu_gp opamp pmg1 pmg1s3dual spi sram_32k uart usb_device usbpd</prov_capabilities> | |
| <description> <div class="category">Key Features:</div> <ul> <li>USB PD 3.1 compliant DRP on both the ports.</li> <li>EPR (Extended Power Range) which can support up to 140W (28V, 5A) power on both ports.</li> <li>USB Type-C alternate mode support.</li> <li>USB bus powered operation.</li> <li>SWD based programming and debug interface.</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/dgdl/Infineon-USB_PD_DRP_dual-role_power_schematics_using_EZ-PD_PMG1_MCUs-ApplicationNotes-v02_00-EN.pdf?fileId=8ac78c8c83cd30810183ea6518841d1e</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="capsense hal low_power"> | |
| <num>Latest 3.X release</num> | |
| <commit>latest-v3.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="capsense hal low_power"> | |
| <num>3.1.0 release</num> | |
| <commit>release-v3.1.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>3.0.0 release</num> | |
| <commit>release-v3.0.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>PSOC4-GENERIC</id> | |
| <category>PSoC™ 4 BSPs</category> | |
| <board_uri>https://github.com/cypresssemiconductorco/TARGET_PSOC4-GENERIC</board_uri> | |
| <chips> | |
| <mcu>CY8C4548AZI-S485</mcu> | |
| </chips> | |
| <name>PSOC4-GENERIC</name> | |
| <summary>This board support package is intended for creating custom PSoC™ 4 BSPs.</summary> | |
| <prov_capabilities>cat2 hal mcu_gp psoc4</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>This is a generic template, there is no corresponding physical board and hence no board-specific macros. The user is expected to create a custom BSP with various pin/hardware details - Refer to KBA230822. Code examples using kit/board resources will not be shown for this BSP until the manifest data for the BSP is updated to include additional capabilities. Refer to ModusToolbox&#8482; user guide for creating custom manifests.</li> <li>This is manifest can also be used to allow the board to show up in the ModusToolbox&#8482; tools</li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>NA</li> </ul></description> | |
| <documentation_url>https://github.com/Infineon/TARGET_PSOC4-GENERIC</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 psoc4_generic"> | |
| <num>Latest 3.X release</num> | |
| <commit>latest-v3.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 psoc4_generic"> | |
| <num>3.1.0 release</num> | |
| <commit>release-v3.1.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>3.0.0 release</num> | |
| <commit>release-v3.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>2.0.0 release</num> | |
| <commit>release-v2.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>Latest 1.X release</num> | |
| <commit>latest-v1.X</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>1.2.0 release</num> | |
| <commit>release-v1.2.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>1.1.0 release</num> | |
| <commit>release-v1.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>1.0.0 release</num> | |
| <commit>release-v1.0.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>CY8CEVAL-062S2</id> | |
| <category>PSoC™ 6 BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_CY8CEVAL-062S2</board_uri> | |
| <chips> | |
| <mcu>CY8C624ABZI-S2D44</mcu> | |
| </chips> | |
| <name>CY8CEVAL-062S2</name> | |
| <summary><![CDATA[ | |
| The CY8CEVAL-062S2 PSoC™ 62S2 Evaluation Kit enables you to evaluate and develop applications using PSoC™ 62 MCU. The PSoC™ 62S2 evaluation kit features an M.2 interface that enables you to connect the supported M.2 radio cards based on AIROC™ Wi-Fi/Bluetooth® combo devices. It comes with industry-leading CAPSENSE™ for touch buttons and slider, on-board debugger/programmer with KitProg3, microSD card interface, 512-Mb Quad-SPI NOR flash, PDM-PCM microphone interface, mikroBUS add-on board interface for peripheral expansion, OPTIGA Trust M device. | |
| <p><b>Note:</b></p> | |
| <p>This BSP does not support Wi-Fi/BT Connectivity examples. To run Wi-Fi/Bluetooth® Connectivity examples on this kit, choose a BSP with the appropriate connectivity M.2 module.</p> | |
| ]]></summary> | |
| <prov_capabilities>adc arduino capsense capsense_button capsense_linear_slider cat1 cat1a comp csd cy8ceval_062s2 dma flash_2048k fram hal i2c i2s j2 led low_power lptimer mcu_gp memory memory_qspi multi_core nor_flash optiga_trust_m pdm psoc6 qspi rgb_led rtc sdhc smart_io spi sram_1024k std_crypto switch uart usb_device usb_host</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div> <ul> <li>Support of up to 2MB Flash and 1MB SRAM</li> <li>Dedicated M.2 interface to connect with M.2 radio modules based on AIROC&#8482; Wi-Fi/Bluetooth&#174; combo devices.</li> <li>mikroBUS add-on board interface for peripheral expansion.</li> <li>Delivers dual-cores, with a 150-MHz Arm&#174; Cortex&#174;-M4 as the primary application processor and a 100-MHz Arm&#174; Cortex&#174;-M0+ as the secondary processor for low-power operations.</li> <li>Supports Full-Speed USB, capacitive-sensing with CAPSENSE&#8482;, a PDM-PCM digital microphone interface, a Quad- SPI interface, 13 serial communication blocks, 7 programmable analog blocks, and 56 programmable digital blocks.</li> </ul><p/> <div class="category">Kit Contents:</div> <ul> <li>PSoC&#8482; 62S2 Evaluation Board</li> <li>Laird Connectivity Sterling-LWB5+ Wi-Fi/Bluetooth&#174; M.2 radio module</li> <li>USB Type-A to Micro-B cable</li> <li>Four jumper wires (4 inches each)</li> <li>Two jumper wires (5 inches each)</li> <li>Quick start guide</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/CY8CEVAL-062S2</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>Latest 4.X release</num> | |
| <commit>latest-v4.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>4.3.0 release</num> | |
| <commit>release-v4.3.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>4.2.0 release</num> | |
| <commit>release-v4.2.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>4.1.0 release</num> | |
| <commit>release-v4.1.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>4.0.0 release</num> | |
| <commit>release-v4.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>Latest 3.X release</num> | |
| <commit>latest-v3.X</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>3.1.0 release</num> | |
| <commit>release-v3.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>3.0.0 release</num> | |
| <commit>release-v3.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.3.0 release</num> | |
| <commit>release-v2.3.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>CY8CEVAL-062S2-LAI-4373M2</id> | |
| <category>PSoC™ 6 BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_CY8CEVAL-062S2-LAI-4373M2</board_uri> | |
| <chips> | |
| <mcu>CY8C624ABZI-S2D44</mcu> | |
| <radio>Sterling-LWB5+ (CYW4373EUBGT)</radio> | |
| </chips> | |
| <name>CY8CEVAL-062S2-LAI-4373M2</name> | |
| <summary><![CDATA[ | |
| The CY8CEVAL-062S2 PSoC™ 62S2 Evaluation Kit enables you to evaluate and develop applications using PSoC™ 62 MCU. The PSoC™ 62S2 evaluation kit features an M.2 interface that enables you to connect the supported M.2 radio cards based on AIROC™ Wi-Fi/Bluetooth® combo devices. It comes with industry-leading CAPSENSE™ for touch buttons and slider, on-board debugger/programmer with KitProg3, microSD card interface, 512-Mb Quad-SPI NOR flash, PDM-PCM microphone interface, mikroBUS add-on board interface for peripheral expansion, OPTIGA Trust M device. | |
| <p><b>Note:</b></p> | |
| <p>CY8CEVAL-062S2-LAI-4373M2 is the board support package for the PSoC™ 62S2 Evaluation Kit in combination with the Sterling-LWB5+ M.2 radio module and supports PSoC™ 6 MCU examples and Wi-Fi/Bluetooth® connectivity examples.</p> | |
| ]]></summary> | |
| <prov_capabilities>adc anycloud arduino bt capsense capsense_button capsense_linear_slider cat1 cat1a comp csd cy8ceval_062_s2_lai_4373m2 cyw43xxx dma flash_2048k fram hal i2c i2s j2 led low_power lptimer mcu_gp memory memory_qspi multi_core nor_flash optiga_trust_m pdm pot psoc6 qspi rgb_led rtc sdhc smart_io spi sram_1024k std_crypto switch uart usb_device usb_host wifi</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div> <ul> <li>Support of up to 2MB Flash and 1MB SRAM</li> <li>Dedicated M.2 interface to connect with M.2 radio modules based on AIROC&#8482; Wi-Fi/Bluetooth&#174; combo devices.</li> <li>mikroBUS add-on board interface for peripheral expansion.</li> <li>Delivers dual-cores, with a 150-MHz Arm&#174; Cortex&#174;-M4 as the primary application processor and a 100-MHz Arm&#174; Cortex&#174;-M0+ as the secondary processor for low-power operations.</li> <li>Supports Full-Speed USB, capacitive-sensing with CAPSENSE&#8482;, a PDM-PCM digital microphone interface, a Quad- SPI interface, 13 serial communication blocks, 7 programmable analog blocks, and 56 programmable digital blocks.</li> </ul><p/> <div class="category">Kit Contents:</div> <ul> <li>PSoC&#8482; 62S2 Evaluation Board</li> <li>Laird Connectivity Sterling-LWB5+ Wi-Fi/Bluetooth&#174; M.2 radio module</li> <li>USB Type-A to Micro-B cable</li> <li>Four jumper wires (4 inches each)</li> <li>Two jumper wires (5 inches each)</li> <li>Quick start guide</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/CY8CEVAL-062S2</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 cy8ceval_062s2_lai_4373m2 cyw4373e"> | |
| <num>Latest 4.X release</num> | |
| <commit>latest-v4.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 cy8ceval_062s2_lai_4373m2 cyw4373e"> | |
| <num>4.3.0 release</num> | |
| <commit>release-v4.3.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 cy8ceval_062s2_lai_4373m2 cyw4373e"> | |
| <num>4.2.0 release</num> | |
| <commit>release-v4.2.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 cy8ceval_062s2_lai_4373m2"> | |
| <num>4.1.0 release</num> | |
| <commit>release-v4.1.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 cy8ceval_062s2_lai_4373m2"> | |
| <num>4.0.0 release</num> | |
| <commit>release-v4.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>Latest 3.X release</num> | |
| <commit>latest-v3.X</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>3.1.0 release</num> | |
| <commit>release-v3.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>3.0.0 release</num> | |
| <commit>release-v3.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.3.0 release</num> | |
| <commit>release-v2.3.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>CY8CEVAL-062S2-MUR-4373M2</id> | |
| <category>PSoC™ 6 BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_CY8CEVAL-062S2-MUR-4373M2</board_uri> | |
| <chips> | |
| <mcu>CY8C624ABZI-S2D44</mcu> | |
| <radio>LBEE5PK2BC (CYW4373IUBGT)</radio> | |
| </chips> | |
| <name>CY8CEVAL-062S2-MUR-4373M2</name> | |
| <summary> The CY8CEVAL-062S2 PSoC&#8482; 62S2 Evaluation Kit enables you to evaluate and develop applications using PSoC&#8482; 62 MCU. The PSoC&#8482; 62S2 evaluation kit features an M.2 interface that enables you to connect the supported M.2 radio cards based on AIROC&#8482; Wi-Fi/Bluetooth&#174; combo devices. It comes with industry-leading CAPSENSE&#8482; for touch buttons and slider, on-board debugger/programmer with KitProg3, microSD card interface, 512-Mb Quad-SPI NOR flash, PDM-PCM microphone interface, mikroBUS add-on board interface for peripheral expansion, OPTIGA Trust M device. <p><b>Note:</b></p> <p>CY8CEVAL-062S2-MUR-4373M2 is the board support package for the PSoC&#8482; 62S2 Evaluation Kit in combination with the 2BC radio module and supports PSoC&#8482; 6 MCU examples and Wi-Fi/Bluetooth® connectivity examples.</p></summary> | |
| <prov_capabilities>adc anycloud arduino bsp_gen4 bt capsense capsense_button capsense_linear_slider cat1 cat1a comp csd cy8ceval_062s2_mur_4373m2 cyw4373 cyw43xxx dma flash_2048k fram hal i2c i2s j2 led low_power lptimer mcu_gp memory memory_qspi multi_core nor_flash optiga_trust_m pdm pot psoc6 qspi rgb_led rtc sdhc smart_io spi sram_1024k std_crypto switch uart usb_device usb_host wifi</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div> <ul> <li>Support of up to 2MB Flash and 1MB SRAM</li> <li>Dedicated M.2 interface to connect with M.2 radio modules based on AIROC&#8482; Wi-Fi/Bluetooth&#174; combo devices.</li> <li>mikroBUS add-on board interface for peripheral expansion.</li> <li>Delivers dual-cores, with a 150-MHz Arm&#174; Cortex&#174;-M4 as the primary application processor and a 100-MHz Arm&#174; Cortex&#174;-M0+ as the secondary processor for low-power operations.</li> <li>Supports Full-Speed USB, capacitive-sensing with CAPSENSE&#8482;, a PDM-PCM digital microphone interface, a Quad- SPI interface, 13 serial communication blocks, 7 programmable analog blocks, and 56 programmable digital blocks.</li> </ul><p/> <div class="category">Kit Contents:</div> <ul> <li>PSoC&#8482; 62S2 Evaluation Board</li> <li>Embedded Artists 2BC Wi-Fi/Bluetooth&#174; M.2 radio module</li> <li>USB Type-A to Micro-B cable</li> <li>Four jumper wires (4 inches each)</li> <li>Two jumper wires (5 inches each)</li> <li>Quick start guide</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/CY8CEVAL-062S2</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>Latest 4.X release</num> | |
| <commit>latest-v4.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>4.3.0 release</num> | |
| <commit>release-v4.3.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>4.2.0 release</num> | |
| <commit>release-v4.2.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>CY8CEVAL-062S2-MUR-4373EM2</id> | |
| <category>PSoC™ 6 BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_CY8CEVAL-062S2-MUR-4373EM2</board_uri> | |
| <chips> | |
| <mcu>CY8C624ABZI-S2D44</mcu> | |
| <radio>LBEE5PK2AE (CYW4373EUBGT)</radio> | |
| </chips> | |
| <name>CY8CEVAL-062S2-MUR-4373EM2</name> | |
| <summary> The CY8CEVAL-062S2 PSoC&#8482; 62S2 Evaluation Kit enables you to evaluate and develop applications using PSoC&#8482; 62 MCU. The PSoC&#8482; 62S2 evaluation kit features an M.2 interface that enables you to connect the supported M.2 radio cards based on AIROC&#8482; Wi-Fi/Bluetooth&#174; combo devices. It comes with industry-leading CAPSENSE&#8482; for touch buttons and slider, on-board debugger/programmer with KitProg3, microSD card interface, 512-Mb Quad-SPI NOR flash, PDM-PCM microphone interface, mikroBUS add-on board interface for peripheral expansion, OPTIGA Trust M device. <p><b>Note:</b></p> <p>CY8CEVAL-062S2-MUR-4373EM2 is the board support package for the PSoC&#8482; 62S2 Evaluation Kit in combination with the 2AE radio module and supports PSoC&#8482; 6 MCU examples and Wi-Fi/Bluetooth® connectivity examples.</p></summary> | |
| <prov_capabilities>adc anycloud arduino bsp_gen4 bt capsense capsense_button capsense_linear_slider cat1 cat1a comp csd cy8ceval_062s2_mur_4373em2 cyw43xxx dma flash_2048k fram hal i2c i2s j2 led low_power lptimer mcu_gp memory memory_qspi multi_core nor_flash optiga_trust_m pdm pot psoc6 qspi rgb_led rtc sdhc smart_io spi sram_1024k std_crypto switch uart usb_device usb_host wifi</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div> <ul> <li>Support of up to 2MB Flash and 1MB SRAM</li> <li>Dedicated M.2 interface to connect with M.2 radio modules based on AIROC&#8482; Wi-Fi/Bluetooth&#174; combo devices.</li> <li>mikroBUS add-on board interface for peripheral expansion.</li> <li>Delivers dual-cores, with a 150-MHz Arm&#174; Cortex&#174;-M4 as the primary application processor and a 100-MHz Arm&#174; Cortex&#174;-M0+ as the secondary processor for low-power operations.</li> <li>Supports Full-Speed USB, capacitive-sensing with CAPSENSE&#8482;, a PDM-PCM digital microphone interface, a Quad- SPI interface, 13 serial communication blocks, 7 programmable analog blocks, and 56 programmable digital blocks.</li> </ul><p/> <div class="category">Kit Contents:</div> <ul> <li>PSoC&#8482; 62S2 Evaluation Board</li> <li>Embedded Artists 2AE Wi-Fi/Bluetooth&#174; M.2 radio module</li> <li>USB Type-A to Micro-B cable</li> <li>Four jumper wires (4 inches each)</li> <li>Two jumper wires (5 inches each)</li> <li>Quick start guide</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/CY8CEVAL-062S2</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="cyw4373e"> | |
| <num>Latest 4.X release</num> | |
| <commit>latest-v4.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="cyw4373e"> | |
| <num>4.3.0 release</num> | |
| <commit>release-v4.3.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="cyw4373e"> | |
| <num>4.2.0 release</num> | |
| <commit>release-v4.2.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>4.1.0 release</num> | |
| <commit>release-v4.1.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>CY8CEVAL-062S2-CYW43022CUB</id> | |
| <category>PSoC™ 6 BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_CY8CEVAL-062S2-CYW43022CUB</board_uri> | |
| <chips> | |
| <mcu>CY8C624ABZI-S2D44</mcu> | |
| <radio>CYW43022CUB</radio> | |
| </chips> | |
| <name>CY8CEVAL-062S2-CYW43022CUB</name> | |
| <summary> The CY8CEVAL-062S2 PSoC&#8482; 62S2 Evaluation Kit enables you to evaluate and develop applications using PSoC&#8482; 62 MCU. The PSoC&#8482; 62S2 evaluation kit features an M.2 interface that enables you to connect the supported M.2 radio cards based on AIROC&#8482; Wi-Fi/Bluetooth&#174; combo devices. It comes with industry-leading CAPSENSE&#8482; for touch buttons and slider, on-board debugger/programmer with KitProg3, microSD card interface, 512-Mb Quad-SPI NOR flash, PDM-PCM microphone interface, mikroBUS add-on board interface for peripheral expansion, OPTIGA Trust M device. <p><b>Note:</b></p> <p>CY8CEVAL-062S2-CYW43022CUB is the board support package for the PSoC&#8482; 62S2 Evaluation Kit in combination with the CYW943022SDM2WLIPA radio module and supports PSoC&#8482; 6 MCU examples and Wi-Fi/Bluetooth® connectivity examples.</p></summary> | |
| <prov_capabilities>adc anycloud arduino bsp_gen4 bt capsense capsense_button capsense_linear_slider cat1 cat1a comp csd cy8ceval_062_mur_cyw43022cub cy8ceval_062s2_cyw43022cub cyw43022 cyw43xxx dma flash_2048k fram hal i2c i2s j2 led low_power lptimer mcu_gp memory memory_qspi multi_core nor_flash optiga_trust_m pdm pot psoc6 qspi rgb_led rtc sdhc smart_io spi sram_1024k std_crypto switch uart usb_device usb_host wifi</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div> <ul> <li>Support of up to 2MB Flash and 1MB SRAM</li> <li>Dedicated M.2 interface to connect with M.2 radio modules based on AIROC&#8482; Wi-Fi/Bluetooth&#174; combo devices.</li> <li>mikroBUS add-on board interface for peripheral expansion.</li> <li>Delivers dual-cores, with a 150-MHz Arm&#174; Cortex&#174;-M4 as the primary application processor and a 100-MHz Arm&#174; Cortex&#174;-M0+ as the secondary processor for low-power operations.</li> <li>Supports Full-Speed USB, capacitive-sensing with CAPSENSE&#8482;, a PDM-PCM digital microphone interface, a Quad- SPI interface, 13 serial communication blocks, 7 programmable analog blocks, and 56 programmable digital blocks.</li> </ul><p/> <div class="category">Kit Contents:</div> <ul> <li>PSoC&#8482; 62S2 Evaluation Board</li> <li>Infineon's AIROC&#8482; CYW943022SDM2WLIPA Wi-Fi/Bluetooth&#174; M.2 radio module</li> <li>USB Type-A to Micro-B cable</li> <li>Four jumper wires (4 inches each)</li> <li>Two jumper wires (5 inches each)</li> <li>Quick start guide</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/CY8CEVAL-062S2</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>Latest 4.X release</num> | |
| <commit>latest-v4.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>4.2.0 release</num> | |
| <commit>release-v4.2.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>CY8CEVAL-062S2-LAI-43439M2</id> | |
| <category>PSoC™ 6 BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_CY8CEVAL-062S2-LAI-43439M2</board_uri> | |
| <chips> | |
| <mcu>CY8C624ABZI-S2D44</mcu> | |
| <radio>Sterling-LWB+ (CYW43439KUBG)</radio> | |
| </chips> | |
| <name>CY8CEVAL-062S2-LAI-43439M2</name> | |
| <summary> The CY8CEVAL-062S2 PSoC&#8482; 62S2 Evaluation Kit enables you to evaluate and develop applications using PSoC&#8482; 62 MCU. The PSoC&#8482; 62S2 evaluation kit features an M.2 interface that enables you to connect the supported M.2 radio cards based on AIROC&#8482; Wi-Fi/Bluetooth&#174; combo devices. It comes with industry-leading CAPSENSE&#8482; for touch buttons and slider, on-board debugger/programmer with KitProg3, microSD card interface, 512-Mb Quad-SPI NOR flash, PDM-PCM microphone interface, mikroBUS add-on board interface for peripheral expansion, OPTIGA Trust M device. <p><b>Note:</b></p> <p>CY8CEVAL-062S2-LAI-43439M2 is the board support package for the PSoC&#8482; 62S2 Evaluation Kit in combination with the LWB+ radio module and supports PSoC&#8482; 6 MCU examples and Wi-Fi/Bluetooth® connectivity examples.</p></summary> | |
| <prov_capabilities>adc anycloud arduino bsp_gen4 bt capsense capsense_button capsense_linear_slider cat1 cat1a comp csd cy8ceval_062s2_lai_43439m2 cyw43439 cyw43xxx dma flash_2048k fram hal i2c i2s j2 led low_power lptimer mcu_gp memory memory_qspi multi_core nor_flash optiga_trust_m pdm pot psoc6 qspi rgb_led rtc sdhc smart_io spi sram_1024k std_crypto switch uart usb_device usb_host wifi</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div> <ul> <li>Support of up to 2MB Flash and 1MB SRAM</li> <li>Dedicated M.2 interface to connect with M.2 radio modules based on AIROC&#8482; Wi-Fi/Bluetooth&#174; combo devices.</li> <li>mikroBUS add-on board interface for peripheral expansion.</li> <li>Delivers dual-cores, with a 150-MHz Arm&#174; Cortex&#174;-M4 as the primary application processor and a 100-MHz Arm&#174; Cortex&#174;-M0+ as the secondary processor for low-power operations.</li> <li>Supports Full-Speed USB, capacitive-sensing with CAPSENSE&#8482;, a PDM-PCM digital microphone interface, a Quad- SPI interface, 13 serial communication blocks, 7 programmable analog blocks, and 56 programmable digital blocks.</li> </ul><p/> <div class="category">Kit Contents:</div> <ul> <li>PSoC&#8482; 62S2 Evaluation Board</li> <li>Laird&#8482;'s Sterling&#8482; LWB+ Wi-Fi 4 and Bluetooth&#174; 5.2 M.2 radio module</li> <li>USB Type-A to Micro-B cable</li> <li>Four jumper wires (4 inches each)</li> <li>Two jumper wires (5 inches each)</li> <li>Quick start guide</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/CY8CEVAL-062S2</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>Latest 4.X release</num> | |
| <commit>latest-v4.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>4.3.0 release</num> | |
| <commit>release-v4.3.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>4.2.0 release</num> | |
| <commit>release-v4.2.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>4.1.0 release</num> | |
| <commit>release-v4.1.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>CY8CEVAL-062S2-MUR-43439M2</id> | |
| <category>PSoC™ 6 BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_CY8CEVAL-062S2-MUR-43439M2</board_uri> | |
| <chips> | |
| <mcu>CY8C624ABZI-S2D44</mcu> | |
| <radio>LBEE5KL1YN (CYW43439KUBG)</radio> | |
| </chips> | |
| <name>CY8CEVAL-062S2-MUR-43439M2</name> | |
| <summary><![CDATA[ | |
| The CY8CEVAL-062S2 PSoC™ 62S2 Evaluation Kit enables you to evaluate and develop applications using PSoC™ 62 MCU. The PSoC™ 62S2 evaluation kit features an M.2 interface that enables you to connect the supported M.2 radio cards based on AIROC™ Wi-Fi/Bluetooth® combo devices. It comes with industry-leading CAPSENSE™ for touch buttons and slider, on-board debugger/programmer with KitProg3, microSD card interface, 512-Mb Quad-SPI NOR flash, PDM-PCM microphone interface, mikroBUS add-on board interface for peripheral expansion, OPTIGA Trust M device. | |
| <p><b>Note:</b></p> | |
| <p>CY8CEVAL-062S2-MUR-43439M2 is the board support package for the PSoC™ 62S2 Evaluation Kit in combination with the 1YN radio module and supports PSoC™ 6 MCU examples and Wi-Fi/Bluetooth® connectivity examples.</p> | |
| ]]></summary> | |
| <prov_capabilities>adc anycloud arduino bt capsense capsense_button capsense_linear_slider cat1 cat1a comp csd cy8ceval_062_mur_43439m2 cyw43439 cyw43xxx dma flash_2048k fram hal i2c i2s j2 led low_power lptimer mcu_gp memory memory_qspi multi_core nor_flash optiga_trust_m pdm pot psoc6 qspi rgb_led rtc sdhc smart_io spi sram_1024k std_crypto switch uart usb_device usb_host wifi</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div> <ul> <li>Support of up to 2MB Flash and 1MB SRAM</li> <li>Dedicated M.2 interface to connect with M.2 radio modules based on AIROC&#8482; Wi-Fi/Bluetooth&#174; combo devices.</li> <li>mikroBUS add-on board interface for peripheral expansion.</li> <li>Delivers dual-cores, with a 150-MHz Arm&#174; Cortex&#174;-M4 as the primary application processor and a 100-MHz Arm&#174; Cortex&#174;-M0+ as the secondary processor for low-power operations.</li> <li>Supports Full-Speed USB, capacitive-sensing with CAPSENSE&#8482;, a PDM-PCM digital microphone interface, a Quad- SPI interface, 13 serial communication blocks, 7 programmable analog blocks, and 56 programmable digital blocks.</li> </ul><p/> <div class="category">Kit Contents:</div> <ul> <li>PSoC&#8482; 62S2 Evaluation Board</li> <li>Embedded Artists 1YN Wi-Fi/Bluetooth&#174; M.2 radio module</li> <li>USB Type-A to Micro-B cable</li> <li>Four jumper wires (4 inches each)</li> <li>Two jumper wires (5 inches each)</li> <li>Quick start guide</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/CY8CEVAL-062S2</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 cy8ceval_062s2_mur_43439m2"> | |
| <num>Latest 4.X release</num> | |
| <commit>latest-v4.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 cy8ceval_062s2_mur_43439m2"> | |
| <num>4.3.1 release</num> | |
| <commit>release-v4.3.1</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 cy8ceval_062s2_mur_43439m2"> | |
| <num>4.3.0 release</num> | |
| <commit>release-v4.3.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 cy8ceval_062s2_mur_43439m2"> | |
| <num>4.2.0 release</num> | |
| <commit>release-v4.2.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 cy8ceval_062s2_mur_43439m2"> | |
| <num>4.1.0 release</num> | |
| <commit>release-v4.1.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 cy8ceval_062s2_mur_43439m2"> | |
| <num>4.0.0 release</num> | |
| <commit>release-v4.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>Latest 3.X release</num> | |
| <commit>latest-v3.X</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>3.1.0 release</num> | |
| <commit>release-v3.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>3.0.0 release</num> | |
| <commit>release-v3.0.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>CY8CKIT-062-BLE</id> | |
| <category>PSoC™ 6 BSPs</category> | |
| <board_uri>https://github.com/cypresssemiconductorco/TARGET_CY8CKIT-062-BLE</board_uri> | |
| <chips> | |
| <mcu>CY8C6347BZI-BLD53</mcu> | |
| </chips> | |
| <name>CY8CKIT-062-BLE</name> | |
| <summary>The PSoC™ 6 Bluetooth® LE Pioneer Kit is a low-cost hardware platform that enables design and debug of the PSoC™ 63 Line (CY8C6347BZI-BLD53).</summary> | |
| <prov_capabilities>adc arduino capsense capsense_button capsense_linear_slider cat1 cat1a comp csd cy8ckit_062_ble dac dma flash_1024k fram hal i2c i2s j2 led low_power lptimer mcu_gp memory memory_qspi multi_core nor_flash opamp pdm psoc6 qspi rgb_led rtc smart_io spi sram_288k std_crypto switch uart udb</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>Bluetooth&#174; LE v5.0</li> <li>Serial memory interface</li> <li>PDM-PCM digital microphone interface</li> <li>Industry-leading CAPSENSE&#8482;lt;/li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>PSoC&#8482; 6 Bluetooth&#174; LE Pioneer board</li> <li>E-Ink display shield with an ultra-low-power 2.7" E-ink display, thermistor, 6-axis motion sensor, and digital microphone</li> <li>USB cable</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/CY8CKIT-062-BLE</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 bt"> | |
| <num>Latest 4.X release</num> | |
| <commit>latest-v4.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 bt"> | |
| <num>4.2.0 release</num> | |
| <commit>release-v4.2.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 bt"> | |
| <num>4.1.0 release</num> | |
| <commit>release-v4.1.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 bt"> | |
| <num>4.0.0 release</num> | |
| <commit>release-v4.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3 ble bt"> | |
| <num>Latest 3.X release</num> | |
| <commit>latest-v3.X</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3 ble bt"> | |
| <num>3.1.0 release</num> | |
| <commit>release-v3.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>3.0.0 release</num> | |
| <commit>release-v3.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.3.0 release</num> | |
| <commit>release-v2.3.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.1.0 release</num> | |
| <commit>release-v2.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.0.0 release</num> | |
| <commit>release-v2.0.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>CY8CKIT-062S2-43012</id> | |
| <category>PSoC™ 6 BSPs</category> | |
| <board_uri>https://github.com/cypresssemiconductorco/TARGET_CY8CKIT-062S2-43012</board_uri> | |
| <chips> | |
| <mcu>CY8C624ABZI-S2D44</mcu> | |
| <radio>LBEE59B1LV (CYW43012C0WKWBG)</radio> | |
| </chips> | |
| <name>CY8CKIT-062S2-43012</name> | |
| <summary>The CY8CKIT-062S2-43012 PSoC™ 6S2 Wi-Fi Bluetooth® Pioneer Kit is a low-cost hardware platform that enables design and debug of PSoC™ 6 MCUs. It comes with a Murata 1LV Module (CYW43012 Wi-Fi + Bluetooth® Combo Chip), industry-leading CAPSENSE™ for touch buttons and slider, on-board debugger/programmer with KitProg3, microSD card interface, 512-Mb Quad-SPI NOR flash, PDM-PCM microphone interface.</summary> | |
| <prov_capabilities>adc anycloud arduino bt capsense capsense_button capsense_linear_slider cat1 cat1a comp csd cy8ckit_062s2_43012 cyw43012 cyw43xxx dma flash_2048k fram hal i2c i2s j2 led low_power lptimer mcu_gp memory memory_qspi multi_core nor_flash pdm pot psoc6 qspi rgb_led rtc sdhc smart_io spi sram_1024k std_crypto switch uart usb_device usb_host wifi</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div> <ul> <li>Support of up to 2MB Flash and 1MB SRAM</li> <li>Dedicated SDHC to interface with WICED wireless devices.</li> <li>Delivers dual-cores, with a 150-MHz Arm&#174; Cortex&#174;-M4 as the primary application processor and a 100-MHz Arm&#174; Cortex&#174;-M0+ as the secondary processor for low-power operations.</li> <li>Supports Full-Speed USB, capacitive-sensing with CAPSENSE&#8482;, a PDM-PCM digital microphone interface, a Quad- SPI interface, 13 serial communication blocks, 7 programmable analog blocks, and 56 programmable digital blocks.</li> </ul><p/> <div class="category">Kit Contents:</div> <ul> <li>PSoC&#8482; 6S2 Wi-Fi Bluetooth&#174; Pioneer Board</li> <li>USB Type-A to Micro-B cable</li> <li>Quick Start Guide</li> <li>Four jumper wires (4 inches each)</li> <li>Two jumper wires (5 inches each)</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/CY8CKIT-062S2-43012</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>Latest 4.X release</num> | |
| <commit>latest-v4.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>4.2.0 release</num> | |
| <commit>release-v4.2.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>4.1.0 release</num> | |
| <commit>release-v4.1.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>4.0.0 release</num> | |
| <commit>release-v4.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>Latest 3.X release</num> | |
| <commit>latest-v3.X</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>3.1.0 release</num> | |
| <commit>release-v3.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>3.0.0 release</num> | |
| <commit>release-v3.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.3.0 release</num> | |
| <commit>release-v2.3.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.1.0 release</num> | |
| <commit>release-v2.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.0.0 release</num> | |
| <commit>release-v2.0.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>CY8CKIT-062S4</id> | |
| <category>PSoC™ 6 BSPs</category> | |
| <board_uri>https://github.com/cypresssemiconductorco/TARGET_CY8CKIT-062S4</board_uri> | |
| <chips> | |
| <mcu>CY8C6244LQI-S4D92</mcu> | |
| </chips> | |
| <name>CY8CKIT-062S4</name> | |
| <summary>The PSoC™ 62S4 Pioneer Kit is a low-cost hardware platform that enables design and debug of the PSoC™ 62S4 Line (CY8C6244LQI-S4D92).</summary> | |
| <prov_capabilities>adc arduino can capsense capsense_button capsense_linear_slider cat1 cat1a comp csd cy8ckit_062s4 dac dma flash_256k hal i2c led low_power lptimer mcu_gp memory memory_qspi multi_core nor_flash opamp psoc6 qspi rgb_led rtc smart_io spi sram_128k std_crypto switch uart usb_device</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>Delivers dual-cores, with a 150-MHz Arm&#174; Cortex&#174;-M4 as the primary application processor and a 100-MHz Arm&#174; Cortex&#174;-M0+ as the secondary processor. </li> <li>256-KB Flash and 128-KB SRAM for customer application on CM4</li> <li>One-time-programmable (OTP) 1-Kb eFuse array</li> <li>Two 12-bit 2-Msps SAR ADCs with synchronized sampling, differential and single-ended modes, 16-channel sequencer with result averaging, and Deep Sleep operation </li> <li>Two opamps with low-power operation modes and Two low-power comparators available in Deep Sleep and Hibernate modes</li> <li>Onboard Thermistor and Ambient Light Sensor. </li> <li>Serial memory interface</li> <li>Industry-leading CAPSENSE&#8482;lt;/li> <li>Ambient Light Sensor</li> <li>Thermistor</li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>PSoC&#8482; 62S4 Pioneer board</li> <li>USB Type-A to Micro-B cable</li> <li>Quick Start Guide</li> <li>Six jumper wires (5 inches each)</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/CY8CKIT-062S4</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 usb_host"> | |
| <num>Latest 4.X release</num> | |
| <commit>latest-v4.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 usb_host"> | |
| <num>4.2.1 release</num> | |
| <commit>release-v4.2.1</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 usb_host"> | |
| <num>4.2.0 release</num> | |
| <commit>release-v4.2.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>4.1.0 release</num> | |
| <commit>release-v4.1.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>4.0.0 release</num> | |
| <commit>release-v4.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>Latest 3.X release</num> | |
| <commit>latest-v3.X</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>3.1.0 release</num> | |
| <commit>release-v3.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>3.0.0 release</num> | |
| <commit>release-v3.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.3.0 release</num> | |
| <commit>release-v2.3.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.1.0 release</num> | |
| <commit>release-v2.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>Latest 0.X release</num> | |
| <commit>latest-v0.X</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>0.5.0 release</num> | |
| <commit>release-v0.5.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>KIT_T2G-B-E_LITE</id> | |
| <category>TRAVEO™ BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_KIT_T2G-B-E_LITE</board_uri> | |
| <chips> | |
| <mcu>CYT2BL5CAS</mcu> | |
| </chips> | |
| <name>KIT_T2G-B-E_LITE</name> | |
| <summary>The KIT_T2G-B-E_LITE, a 100-pin evaluation board is based on the TRAVEO™ T2G Body Entry family of devices. T2G-B-E MCU is designed for automotive and industrial applications. The evaluation board carries a T2G-B-E microcontroller,and headers compatible with Arduino for interfacing Arduino shields. In addition, the board features an on-board programmer/debugger (KitProg3), CAN FD transceiver, a Shield2Go connector interface and MikroBUS connector interface, three user LEDs, one potentiometer, and two push buttons. The board supports operating voltages from 3.3 V to 5.0 V for T2G-B-E device.</summary> | |
| <prov_capabilities>adc arduino bsp_gen4 can cat1 cat1a dma flash_4160k hal i2c kit_t2g_b_e_lite led lin low_power lptimer mcu_gp memory multi_core rtc smart_io spi sram_512k std_crypto switch t2gbe uart</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>CYT2BL5CAA 4MB Flash 176-pin TEQFP device</li> <li>Programming interface (Arm&#174; Standard JTAG, Cortex&#174; Debug + ETM with Arm&#174; ETM Mictor)</li> <li>Reset control with manual reset switch and voltage supervision</li> <li>CAN FD interface</li> <li>KitProg3 on-board SWD programmer/debugger, USB-UART and USB-I2C bridge functionality</li> <li>A Shield2Go connector interface and a MikroBUS connector interface</li> <li>Selectable input supply voltages of 3.3 V and 5.0 V for the T2G-B-H device</li> <li>Three user LEDs, two user buttons, and a reset button for the T2G-B-H device</li> <li>A potentiometer which can be used to simulate analog sensor output</li> <li>A mode button and a mode LED for KitProg3</li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>T2G-B-E evaluation board</li> <li>USB Type-A to Micro-B cable</li> <li>12V/3A DC power adapter with additional blades</li> <li>Six jumper wires</li> <li>Quick start guide</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/KIT_T2G-B-E_LITE</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.1.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>Latest 4.X release</num> | |
| <commit>latest-v4.X</commit> | |
| </version> | |
| <version tools_min_version="3.1.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>4.3.0 release</num> | |
| <commit>release-v4.3.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>KIT_T2G-B-H_EVK</id> | |
| <category>TRAVEO™ BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_KIT_T2G-B-H_EVK</board_uri> | |
| <chips> | |
| <mcu>CYT4BFBCHE</mcu> | |
| </chips> | |
| <name>KIT_T2G-B-H_EVK</name> | |
| <summary>The KIT_T2G-B-H_EVK, a 272-pin evaluation board is based on the TRAVEO T2G family of devices. T2G-B-H MCU is designed for industrial applications. The evaluation board carries a T2G-B-H microcontroller, a M.2 interface connector for interfacing radio modules based on AIROC™ Wi-Fi and Bluetooth® combos (currently not supported), SMIF dual header compatible with Digilent Pmod for interfacing HYPERBUS™ memories (currently not supported), and headers compatible with Arduino for interfacing Arduino shields. In addition, the board features an on-board programmer/debugger (KitProg3), a 512-Mbit QSPI NOR flash, CAN FD transceiver, Gigabit Ethernet PHY transceiver with RJ45 connector interface, a micro-B connector for USB device interface, three user LEDs, one potentiometer, and two push buttons. The board supports operating voltages from 3.3 V to 5.0 V for T2G-B-H device. <p><b>Note:</b></p> <p>Some additional setups will allow you to use more code examples than those shown on the next page. Click < a href="https://github.com/Infineon/TRAVEO_T2G_code_examples#how-to-setup">here</a> for setup instructions.</p></summary> | |
| <prov_capabilities>arduino cat1 cat1c ethernet flash_8384k hal i2c kit_t2g_b_h_evk led low_power mcu_gp memory memory_qspi multi_core nor_flash qspi rtc smart_io spi sram_1024k std_crypto switch t2gbh uart</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>CYT4BFBCHE 8MB Flash 272-pin BGA device</li> <li>Programming interface (Arm&#174; Standard JTAG, Cortex&#174; Debug + ETM with Arm&#174; ETM Mictor)</li> <li>Reset control with manual reset switch and voltage supervision</li> <li>Gigabit Ethernet interface</li> <li>CAN FD interface</li> <li>M.2 interface connector to connect radio modules based on AIROC™ Wi-Fi & Bluetooth® combos (currently not supported)</li> <li>512-Mbit external Quad SPI NOR Flash that provides a fast, expandable memory for data and code</li> <li>KitProg3 on-board SWD programmer/debugger, USB-UART and USB-I2C bridge functionality</li> <li>A micro-B connector for USB device interface</li> <li>Selectable input supply voltages of 3.3 V and 5.0 V for the T2G-B-H device</li> <li>Three user LEDs, two user buttons, and a reset button for the T2G-B-H device</li> <li>A potentiometer which can be used to simulate analog sensor output</li> <li>A mode button and a mode LED for KitProg3</li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>T2G-B-H evaluation board</li> <li>USB Type-A to Micro-B cable</li> <li>12V/3A DC power adapter with additional blades</li> <li>Six jumper wires</li> <li>< a href="https://www.infineon.com/dgdl/?fileId=8ac78c8c8823155701885307f0902ab2">Quick start guide</a></p> </ul> <div class="category">Low-level Driver References:</div><ul> <li><a href="https://infineon.github.io/mtb-pdl-cat1/pdl_api_reference_manual/html/index.html">Peripheral driver library (PDL) library</a></p> <li><a href="https://infineon.github.io/mtb-hal-cat1/html/modules.html">Hardware abstraction layer (HAL) library</a></p></description> | |
| <documentation_url>https://www.infineon.com/cms/en/product/evaluation-boards/kit_t2g-b-h_evk/</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="adc bsp_gen4 can i2s lin lptimer"> | |
| <num>Latest 1.X release</num> | |
| <commit>latest-v1.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="adc bsp_gen4 can i2s lin lptimer"> | |
| <num>1.2.0 release</num> | |
| <commit>release-v1.2.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>1.1.0 release</num> | |
| <commit>release-v1.1.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>1.0.0 release</num> | |
| <commit>release-v1.0.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>KIT_T2G-B-H_LITE</id> | |
| <category>TRAVEO™ BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_KIT_T2G-B-H_LITE</board_uri> | |
| <chips> | |
| <mcu>CYT4BF8CDS</mcu> | |
| </chips> | |
| <name>KIT_T2G-B-H_LITE</name> | |
| <summary>The KIT_T2G-B-H_LITE, a 176-pin evaluation board is based on the TRAVEO™ T2G family of devices. T2G-B-H MCU is designed for automotive and industrial applications. The evaluation board carries a T2G-B-H microcontroller,and headers compatible with Arduino for interfacing Arduino shields. In addition, the board features an on-board programmer/debugger (KitProg3), Two 512-Mbit QSPI NOR flashes, CAN FD transceiver, Ethernet PHY transceiver with RJ45 connector interface, a Shield2Go connector interface and MikroBUS connector interface, three user LEDs, one potentiometer, and two push buttons. The board supports operating voltages from 3.3 V to 5.0 V for T2G-B-H device. <p><b>Note:</b></p> <p>Some additional setups will allow you to use more code examples than those shown on the next page. Click < a href="https://github.com/Infineon/TRAVEO_T2G_code_examples#how-to-setup">here</a> for setup instructions.</p></summary> | |
| <prov_capabilities>arduino cat1 cat1c ethernet flash_8384k hal i2c kit_t2g_b_h_lite led low_power mcu_gp memory memory_qspi multi_core nor_flash qspi rtc smart_io spi sram_1024k std_crypto switch t2gbh_lite uart</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>CYT4BF8CDS 8MB Flash 176-pin TEQFP device</li> <li>Programming interface (Arm&#174; Standard JTAG, Cortex&#174; Debug + ETM with Arm&#174; ETM Mictor)</li> <li>Reset control with manual reset switch and voltage supervision</li> <li>CAN FD interface</li> <li>Ethernet interface</li> <li>Two 512-Mbit external Quad SPI NOR Flashes that provides a fast, expandable memory for data and code</li> <li>KitProg3 on-board SWD programmer/debugger, USB-UART and USB-I2C bridge functionality</li> <li>A Shield2Go connector interface and a MikroBUS connector interface</li> <li>Selectable input supply voltages of 3.3 V and 5.0 V for the T2G-B-H device</li> <li>Three user LEDs, two user buttons, and a reset button for the T2G-B-H device</li> <li>A potentiometer which can be used to simulate analog sensor output</li> <li>A mode button and a mode LED for KitProg3</li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>T2G-B-H evaluation board</li> <li>USB Type-A to Micro-B cable</li> <li>12V/3A DC power adapter with additional blades</li> <li>Six jumper wires</li> <li>< a href="https://www.infineon.com/dgdl/?fileId=8ac78c8c8929aa4d018990f64ecf5f3c">Quick start guide</a></p> </ul> <div class="category">Low-level Driver References:</div><ul> <li><a href="https://infineon.github.io/mtb-pdl-cat1/pdl_api_reference_manual/html/index.html">Peripheral driver library (PDL) library</a></p> <li><a href="https://infineon.github.io/mtb-hal-cat1/html/modules.html">Hardware abstraction layer (HAL) library</a></p></description> | |
| <documentation_url>https://www.infineon.com/cms/en/product/evaluation-boards/kit_t2g-b-h_lite/</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="adc bsp_gen4 can i2s lin lptimer"> | |
| <num>Latest 1.X release</num> | |
| <commit>latest-v1.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="adc bsp_gen4 can i2s lin lptimer"> | |
| <num>1.2.0 release</num> | |
| <commit>release-v1.2.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>1.1.0 release</num> | |
| <commit>release-v1.1.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>KIT_XMC72_EVK</id> | |
| <category>XMC™ BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_KIT_XMC72_EVK</board_uri> | |
| <chips> | |
| <mcu>XMC7200D-E272K8384</mcu> | |
| </chips> | |
| <name>KIT_XMC72_EVK</name> | |
| <summary>The KIT_XMC72_EVK, a 272-pin evaluation board is based on the XMC7000 family of devices. XMC7000 MCU is designed for industrial applications. The evaluation board carries a XMC7000D microcontroller, a M.2 interface connector for interfacing radio modules based on AIROC™ Wi-Fi and Bluetooth® combos (currently not supported), SMIF dual header compatible with Digilent Pmod for interfacing HYPERBUS™ memories (currently not supported), and headers compatible with Arduino for interfacing Arduino shields. In addition, the board features an on-board programmer/debugger (KitProg3), a 512-Mbit QSPI NOR flash, CAN FD transceiver, Gigabit Ethernet PHY transceiver with RJ45 connector interface, a micro-B connector for USB device interface, three user LEDs, one potentiometer, and two push buttons. The board supports operating voltages from 3.3 V to 5.0 V for XMC7000D device.</summary> | |
| <prov_capabilities>arduino cat1 cat1c ethernet flash_8384k hal i2c kit_xmc72_evk led low_power mcu_gp memory memory_qspi multi_core nor_flash qspi rtc smart_io spi sram_1024k std_crypto switch uart xmc7000</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>XMC7200D-E272K8384 8MB Flash 272-pin BGA device</li> <li>Programming interface (Arm&#174; Standard JTAG, Cortex&#174; Debug + ETM with Arm&#174; ETM Mictor)</li> <li>Reset control with manual reset switch and voltage supervision</li> <li>Gigabit Ethernet interface</li> <li>CAN FD interface</li> <li>M.2 interface connector to connect radio modules based on AIROC™ Wi-Fi & Bluetooth® combos (currently not supported)</li> <li>512-Mbit external Quad SPI NOR Flash that provides a fast, expandable memory for data and code</li> <li>KitProg3 on-board SWD programmer/debugger, USB-UART and USB-I2C bridge functionality</li> <li>A micro-B connector for USB device interface</li> <li>Selectable input supply voltages of 3.3 V and 5.0 V for the XMC7000D device</li> <li>Three user LEDs, two user buttons, and a reset button for the XMC7000D device</li> <li>A potentiometer which can be used to simulate analog sensor output</li> <li>A mode button and a mode LED for KitProg3</li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>XMC7200 evaluation board</li> <li>USB Type-A to Micro-B cable</li> <li>12V/3A DC power adapter with additional blades</li> <li>Six jumper wires</li> <li>Quick start guide</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/cms/en/product/evaluation-boards/kit_xmc72_evk/</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen5"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen5"> | |
| <num>2.1.0 release</num> | |
| <commit>release-v2.1.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen5"> | |
| <num>2.0.1 release</num> | |
| <commit>release-v2.0.1</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen5"> | |
| <num>2.0.0 release</num> | |
| <commit>release-v2.0.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="adc bsp_gen4 can i2s lptimer"> | |
| <num>Latest 1.X release</num> | |
| <commit>latest-v1.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="adc bsp_gen4 can i2s lptimer"> | |
| <num>1.2.1 release</num> | |
| <commit>release-v1.2.1</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="adc bsp_gen4 can i2s lptimer"> | |
| <num>1.2.0 release</num> | |
| <commit>release-v1.2.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>1.1.0 release</num> | |
| <commit>release-v1.1.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>1.0.0 release</num> | |
| <commit>release-v1.0.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>KIT_XMC72_EVK_MUR_43439M2</id> | |
| <category>XMC™ BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_KIT_XMC72_EVK_MUR_43439M2</board_uri> | |
| <chips> | |
| <mcu>XMC7200D-E272K8384</mcu> | |
| <radio>LBEE5KL1YN (CYW43439KUBG)</radio> | |
| </chips> | |
| <name>KIT_XMC72_EVK_MUR_43439M2</name> | |
| <summary>The KIT_XMC72_EVK_MUR_43439M2, in combination with the 1YN radio module, supports Wi-Fi/Bluetooth&#174; connectivity examples and a 272-pin evaluation board, is based on the XMC7000 family of devices. XMC7000 MCU is designed for industrial applications. The evaluation board carries a XMC7000D microcontroller, a M.2 interface connector for interfacing radio modules based on AIROC&#8482; Wi-Fi and Bluetooth&#174; combos, SMIF dual header compatible with Digilent Pmod for interfacing HYPERBUS™ memories (currently not supported), and headers compatible with Arduino for interfacing Arduino shields. In addition, the board features an on-board programmer/debugger (KitProg3), a 512-Mbit QSPI NOR flash, CAN FD transceiver, Gigabit Ethernet PHY transceiver with RJ45 connector interface, a micro-B connector for USB device interface, three user LEDs, one potentiometer, and two push buttons. The board supports operating voltages from 3.3 V to 5.0 V for XMC7000D device.</summary> | |
| <prov_capabilities>adc anycloud arduino bt can cat1 cat1c cyw43439 cyw43xxx ethernet flash_8384k hal i2c i2s kit_xmc72_evk_mur_43439m2 led low_power lptimer mcu_gp memory memory_qspi multi_core nor_flash qspi rtc sdhc smart_io spi sram_1024k std_crypto switch uart wifi xmc7000</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>XMC7200D-E272K8384 8MB Flash 272-pin BGA device</li> <li>Programming interface (Arm&#174; Standard JTAG, Cortex&#174; Debug + ETM with Arm&#174; ETM Mictor)</li> <li>Reset control with manual reset switch and voltage supervision</li> <li>Gigabit Ethernet interface</li> <li>CAN FD interface</li> <li>M.2 interface connector to connect radio modules based on AIROC&#8482; Wi-Fi & Bluetooth&#174; combos </li> <li>512-Mbit external Quad SPI NOR Flash that provides a fast, expandable memory for data and code</li> <li>KitProg3 on-board SWD programmer/debugger, USB-UART and USB-I2C bridge functionality</li> <li>A micro-B connector for USB device interface</li> <li>Selectable input supply voltages of 3.3 V and 5.0 V for the XMC7000D device</li> <li>Three user LEDs, two user buttons, and a reset button for the XMC7000D device</li> <li>A potentiometer which can be used to simulate analog sensor output</li> <li>A mode button and a mode LED for KitProg3</li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>XMC7200 evaluation board</li> <li>Embedded Artists 1YN Wi-Fi/Bluetooth&#174; M.2 radio module</li> <li>USB Type-A to Micro-B cable</li> <li>12V/3A DC power adapter with additional blades</li> <li>Six jumper wires</li> <li>Quick start guide</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/KIT_XMC72_EVK</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen5"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen5"> | |
| <num>2.1.0 release</num> | |
| <commit>release-v2.1.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen5"> | |
| <num>2.0.1 release</num> | |
| <commit>release-v2.0.1</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen5"> | |
| <num>2.0.0 release</num> | |
| <commit>release-v2.0.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>Latest 1.X release</num> | |
| <commit>latest-v1.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>1.2.1 release</num> | |
| <commit>release-v1.2.1</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>1.2.0 release</num> | |
| <commit>release-v1.2.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>CY8CKIT-062-WIFI-BT</id> | |
| <category>PSoC™ 6 BSPs</category> | |
| <board_uri>https://github.com/cypresssemiconductorco/TARGET_CY8CKIT-062-WIFI-BT</board_uri> | |
| <chips> | |
| <mcu>CY8C6247BZI-D54</mcu> | |
| <radio>LBEE5KL1DX (CYW4343WKUBG)</radio> | |
| </chips> | |
| <name>CY8CKIT-062-WIFI-BT</name> | |
| <summary>The PSoC™ 6 Wi-Fi Bluetooth® Pioneer Kit is a low-cost hardware platform that enables design and debug of the PSoC™ 62 MCU (CY8C6247BZI-D54) and the Murata LBEE5KL1DX Module (CYW4343W WiFi + Bluetooth® Combo Chip).</summary> | |
| <prov_capabilities>adc anycloud arduino bt capsense capsense_button capsense_linear_slider cat1 cat1a comp csd cy8ckit_062_wifi_bt cyw4343w cyw43xxx dac dma flash_1024k fram hal i2c i2s j2 led low_power lptimer mcu_gp memory memory_qspi multi_core nor_flash opamp pdm psoc6 qspi rgb_led rtc smart_io spi sram_288k std_crypto switch uart udb usb_device usb_host wifi</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>Bluetooth&#174; LE v5.0</li> <li>Serial memory interface</li> <li>PDM-PCM digital microphone interface</li> <li>Industry-leading CAPSENSE&#8482;lt;/li> <li>Full-speed USB</li> <li>IEEE 802.11a/b/g/n WLAN</li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>PSoC&#8482; 6 Pioneer board</li> <li>TFT display shield with a 2.4" TFT display, light sensor, 6-axis motion sensor, and digital microphone</li> <li>USB cable</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/CY8CKIT-062-WIFI-BT</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>Latest 4.X release</num> | |
| <commit>latest-v4.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>4.2.0 release</num> | |
| <commit>release-v4.2.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>4.1.0 release</num> | |
| <commit>release-v4.1.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>4.0.0 release</num> | |
| <commit>release-v4.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>Latest 3.X release</num> | |
| <commit>latest-v3.X</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>3.1.0 release</num> | |
| <commit>release-v3.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>3.0.0 release</num> | |
| <commit>release-v3.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.3.0 release</num> | |
| <commit>release-v2.3.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.1.0 release</num> | |
| <commit>release-v2.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.0.0 release</num> | |
| <commit>release-v2.0.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>CY8CKIT-062S2-AI</id> | |
| <category>PSoC™ 6 BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_CY8CKIT-062S2-AI</board_uri> | |
| <chips> | |
| <mcu>CY8C624ABZI-S2D44</mcu> | |
| <radio>LBEE5KL1YN</radio> | |
| </chips> | |
| <name>CY8CKIT-062S2-AI</name> | |
| <summary>The CY8CKIT-062S2-AI PSoC&#8482; 62S2 AI Evaluation Kit is a cost effective and small development kit providing the best of Infineon's solutions to drive adoption of Infineon's hardware, Imagimob Studio and Infineon's Software products.<br> It comes with Murata LBEE5KL1YN Module, KitProg3, microSD card interface, 512-Mb Quad-SPI NOR flash, motion sensor, magnetometer, pressure sensor, PDM-PCM microphone, and RADAR sensor.</summary> | |
| <prov_capabilities>adc anycloud bsp_gen4 bt cat1 cat1a cy8ckit_062s2_ai cyw43439 cyw43xxx dma flash_2048k hal i2c i2s led low_power lptimer mcu_gp memory memory_qspi multi_core nor_flash pdm psoc6 qspi rtc smart_io spi sram_1024k std_crypto switch uart usb_device wifi</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div> <ul> <li>Support of up to 512-Mb NOR flash</li> <li>Supports Full-Speed USB, a PDM-PCM digital microphone interface, a Quad-SPI interface, an I2C interface.</li> <li>Supports 6-axis motion sensor (BMI270)</li> <li>Supports magnetometer (BMM350)</li> <li>Supports barometric pressure sensor (DPS368)</li> <li>Supports RADAR sensor (BGT60TR13C)</li> </ul><p/> <div class="category">Kit Contents:</div> <ul> <li>PSoC&#8482; 62S2 AI Evaluation board</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/CY8CKIT-062S2-AI</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>Latest 4.X release</num> | |
| <commit>latest-v4.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>4.3.0 release</num> | |
| <commit>release-v4.3.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>CY8CKIT-064B0S2-4343W</id> | |
| <category>PSoC™ 6 BSPs</category> | |
| <board_uri>https://github.com/cypresssemiconductorco/TARGET_CY8CKIT-064B0S2-4343W</board_uri> | |
| <chips> | |
| <mcu>CYB0644ABZI-S2D44</mcu> | |
| <radio>CYW4343WKUBG</radio> | |
| </chips> | |
| <name>CY8CKIT-064B0S2-4343W</name> | |
| <summary>The CY8CKIT-064B0S2-4343W PSoC™ 64 Secure Boot Wi-Fi Bluetooth® Pioneer Kit is a low-cost hardware platform that enables design and debug of PSoC™ 64 MCUs. It comes with a Murata LBEE5KL1DX Module (CYW4343W Wi-Fi + Bluetooth® Combo Chip), industry-leading CAPSENSE™ for touch buttons and slider, on-board debugger/programmer with KitProg3, microSD card interface, 512-Mb Quad-SPI NOR flash, 4-MBit Quad-SPI F-RAM, and a PDM-PCM microphone interface.</summary> | |
| <prov_capabilities>adc arduino bt capsense capsense_button capsense_linear_slider cat1 cat1a comp csd cy8ckit_064b0s2_4343w cyw4343w cyw43xxx dma flash_1856k fram hal i2c i2s j2 led low_power lptimer mcu_gp memory memory_qspi nor_flash pdm pot psoc6 qspi rgb_led rtc secure_boot smart_io spi sram_1024k std_crypto switch uart usb_device usb_host wifi</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div> <ul> <li>Support of up to 2MB Flash and 1MB SRAM</li> <li>Dedicated SDHC to interface with WICED wireless devices.</li> <li>Delivers dual-cores, with a 150-MHz Arm&#174; Cortex&#174;-M4 as the primary application processor and a 100-MHz Arm&#174; Cortex&#174;-M0+ as the secondary processor for low-power operations.</li> <li>Supports Full-Speed USB, capacitive-sensing with CAPSENSE&#8482;, a PDM-PCM digital microphone interface, a Quad- SPI interface, 13 serial communication blocks, 7 programmable analog blocks, and 56 programmable digital blocks.</li> </ul><p/> <div class="category">Kit Contents:</div> <ul> <li>PSoC&#8482; 64 Wi-Fi Bluetooth&#174; Pioneer Board</li> <li>USB Type-A to Micro-B cable</li> <li>Quick Start Guide</li> <li>Four jumper wires (4 inches each)</li> <li>Two jumper wires (5 inches each)</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/CY8CKIT-064B0S2-4343W</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>Latest 4.X release</num> | |
| <commit>latest-v4.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>4.2.0 release</num> | |
| <commit>release-v4.2.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>4.1.0 release</num> | |
| <commit>release-v4.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>Latest 3.X release</num> | |
| <commit>latest-v3.X</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>3.1.0 release</num> | |
| <commit>release-v3.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>3.0.0 release</num> | |
| <commit>release-v3.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.1" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="2.2.1" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.3.0 release</num> | |
| <commit>release-v2.3.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.1" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.2.0 release</num> | |
| <commit>release-v2.2.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.1" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.1.0 release</num> | |
| <commit>release-v2.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.1" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.0.0 release</num> | |
| <commit>release-v2.0.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>CY8CKIT-064S0S2-4343W</id> | |
| <category>PSoC™ 6 BSPs</category> | |
| <board_uri>https://github.com/cypresssemiconductorco/TARGET_CY8CKIT-064S0S2-4343W</board_uri> | |
| <chips> | |
| <mcu>CYS0644ABZI-S2D44</mcu> | |
| <radio>CYW4343WKUBG</radio> | |
| </chips> | |
| <name>CY8CKIT-064S0S2-4343W</name> | |
| <summary>The CY8CKIT-064S0S2-4343W PSoC™ 64 Standard Secure - AWS Wi-Fi Bluetooth® Pioneer Kit is a low-cost hardware platform that enables design and debug of PSoC™ 64 MCUs. It comes with a Murata LBEE5KL1DX Module (CYW4343W Wi-Fi + Bluetooth® Combo Chip), industry-leading CAPSENSE™ for touch buttons and slider, on-board debugger/programmer with KitProg3, microSD card interface, 512-Mb Quad-SPI NOR flash, 4-Mbit Quad-SPI F-RAM and PDM-PCM microphone interface.</summary> | |
| <prov_capabilities>adc arduino bt capsense capsense_button capsense_linear_slider cat1 cat1a comp csd cy8ckit_064s0s2_4343w cyw4343w cyw43xxx dma flash_1856k fram hal i2c i2s j2 led low_power lptimer mcu_gp memory memory_qspi nor_flash pdm pot psoc6 qspi rgb_led rtc secure_boot smart_io spi sram_1024k switch uart usb_device usb_host wifi</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div> <ul> <li>Support of up to 2MB Flash and 1MB SRAM</li> <li>Dedicated SDHC to interface with WICED wireless devices.</li> <li>Delivers dual-cores, with a 150-MHz Arm&#174; Cortex&#174;-M4 as the primary application processor and a 100-MHz Arm&#174; Cortex&#174;-M0+ as the secondary processor for low-power operations.</li> <li>Supports Full-Speed USB, capacitive-sensing with CAPSENSE&#8482;, a PDM-PCM digital microphone interface, a Quad- SPI interface, 13 serial communication blocks, 7 programmable analog blocks, and 56 programmable digital blocks.</li> </ul><p/> <div class="category">Kit Contents:</div> <ul> <li>PSoC&#8482; 64 Wi-Fi Bluetooth&#174; Pioneer Board</li> <li>USB Type-A to Micro-B cable</li> <li>Quick Start Guide</li> <li>Four jumper wires (4 inches each)</li> <li>Two jumper wires (5 inches each)</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/CY8CKIT-064S0S2-4343W</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>Latest 4.X release</num> | |
| <commit>latest-v4.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>4.2.0 release</num> | |
| <commit>release-v4.2.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>4.1.0 release</num> | |
| <commit>release-v4.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>Latest 3.X release</num> | |
| <commit>latest-v3.X</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>3.1.0 release</num> | |
| <commit>release-v3.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>3.0.0 release</num> | |
| <commit>release-v3.0.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>CY8CPROTO-062-4343W</id> | |
| <category>PSoC™ 6 BSPs</category> | |
| <board_uri>https://github.com/cypresssemiconductorco/TARGET_CY8CPROTO-062-4343W</board_uri> | |
| <chips> | |
| <mcu>CY8C624ABZI-S2D44</mcu> | |
| <radio>LBEE5KL1DX (CYW4343WKUBG)</radio> | |
| </chips> | |
| <name>CY8CPROTO-062-4343W</name> | |
| <summary>The CY8CPROTO-062-4343W PSoC™ 6 Wi-Fi Bluetooth® Prototyping Kit is a low-cost hardware platform that enables design and debug of PSoC™ 6 MCUs. It comes with a Murata LBEE5KL1DX module, based on the CYW4343W combo device, industry-leading CAPSENSE™ for touch buttons and slider, on-board debugger/programmer with KitProg3, microSD card interface, 512-Mb Quad-SPI NOR flash, PDM-PCM microphone, and a thermistor. This kit is designed with a snap-away form-factor, allowing the user to separate the different components and features that come with this kit and use independently. In addition, support for Digilent's Pmod interface is also provided with this kit.</summary> | |
| <prov_capabilities>adc anycloud bt capsense capsense_button capsense_linear_slider cat1 cat1a comp csd cy8cproto_062_4343w cyw4343w cyw43xxx dma flash_2048k hal i2c i2s led low_power lptimer mcu_gp memory memory_qspi multi_core nor_flash pdm psoc6 qspi rtc sdhc smart_io spi sram_1024k std_crypto switch uart usb_device wifi</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div> <ul> <li>Support of up to 2MB Flash and 1MB SRAM</li> <li>Dedicated SDHC to interface with WICED wireless devices.</li> <li>Delivers dual-cores, with a 150-MHz Arm&#174; Cortex&#174;-M4 as the primary application processor and a 100-MHz Arm&#174; Cortex&#174;-M0+ as the secondary processor for low-power operations.</li> <li>Supports Full-Speed USB, capacitive-sensing with CAPSENSE&#8482;, a PDM-PCM digital microphone interface, a Quad- SPI interface, 13 serial communication blocks, 7 programmable analog blocks, and 56 programmable digital blocks.</li> </ul> <div class="category">Kit Contents:</div> <ul> <li>PSoC&#8482; 6 Wi-Fi Bluetooth&#174; Prototyping Board</li> <li>USB Type-A to Micro-B cable</li> <li>Quick Start Guide</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/CY8CPROTO-062-4343W</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 usb_host"> | |
| <num>Latest 4.X release</num> | |
| <commit>latest-v4.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 usb_host"> | |
| <num>4.2.0 release</num> | |
| <commit>release-v4.2.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>4.1.0 release</num> | |
| <commit>release-v4.1.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>4.0.0 release</num> | |
| <commit>release-v4.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>Latest 3.X release</num> | |
| <commit>latest-v3.X</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>3.1.0 release</num> | |
| <commit>release-v3.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>3.0.0 release</num> | |
| <commit>release-v3.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.3.0 release</num> | |
| <commit>release-v2.3.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.1.0 release</num> | |
| <commit>release-v2.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.0.0 release</num> | |
| <commit>release-v2.0.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>CY8CPROTO-062S2-43439</id> | |
| <category>PSoC™ 6 BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_CY8CPROTO-062S2-43439</board_uri> | |
| <chips> | |
| <mcu>CY8C624ABZI-S2D44</mcu> | |
| <radio>LBEE5KL1YN (CYW43439KUBG)</radio> | |
| </chips> | |
| <name>CY8CPROTO-062S2-43439</name> | |
| <summary>The CY8CPROTO-062S2-43439 PSoC&#8482; 62S2 Wi-Fi Bluetooth&#174; Prototyping Kit is a low-cost hardware platform that enables design and debug of PSoC&#8482; 6 MCUs. It comes with a Murata LBEE5KL1YN module, based on the CYW43439 combo device, industry-leading CAPSENSE&#8482; for touch buttons and slider, on-board debugger/programmer with KitProg3, microSD card interface, 512-Mb Quad- SPI NOR flash, PDM-PCM microphone, and a thermistor. This kit is designed with a snap-away form-factor, allowing the user to separate the different components and features that come with this kit and use independently. In addition, support for Digilent's Pmod interface is also provided with this kit.</summary> | |
| <prov_capabilities>adc anycloud bsp_gen4 bt capsense capsense_button capsense_linear_slider cat1 cat1a comp csd cy8cproto_062s2_43439 cyw43439 cyw43xxx dma flash_2048k hal i2c i2s led low_power lptimer mcu_gp memory memory_qspi multi_core nfc_nbt nor_flash pdm psoc6 qspi rtc sdhc smart_io spi sram_1024k std_crypto switch uart usb_device wifi</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div> <ul> <li>Featuring the PSoC&#8482; 6 CY8C62xA MCU (MPN: [CY8C624ABZI-S2D44](https://www.infineon.com/cms/en/product/microcontroller/32-bit-psoc-arm-cortex-microcontroller/psoc-6-32-bit-arm-cortex-m4-mcu/cy8c624abzi-s2d44/)): Ultra low power, high performance MCU based on the dual core CPU architecture of Arm&#174; Cortex&#174;-M4 and Arm&#174; Cortex&#174;-M0+, up to 2 MB of on-chip Flash, 1 MB of SRAM, built-in hardware and software security features, rich analog, digital, and communication peripherals</li> <li>Wireless module(Murata 1YN) based on Infineon’s AIROC&#8482; CYW43439 single-chip combo device (2.4 GHz Wi-Fi 4 (802.11n) and Bluetooth&#174; 5.2) for evaluating cloud connected applications with PSoC&#8482; 6 as the Wi-Fi host MCU</li> <li>Industry leading CAPSENSE&#8482; featuring linear slider, buttons for prototyping elegant, robust capacitive touch-based user interfaces</li> <li>Integrated on-board programmer / debugger, memory expansion through 512-Mb Quad-SPI NOR Flash, microSD card interface, PDM microphone, thermistor, push buttons, LEDs</li> </ul> <div class="category">Kit Contents:</div> <ul> <li>PSoC&#8482; 62S2 Wi-Fi Bluetooth&#174; Prototyping Board</li> <li>USB Type-A to Micro-B cable</li> <li>Quick Start Guide</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/CY8CPROTO-062S2-43439</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>Latest 4.X release</num> | |
| <commit>latest-v4.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>4.2.0 release</num> | |
| <commit>release-v4.2.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>4.1.0 release</num> | |
| <commit>release-v4.1.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>CY8CPROTO-062S3-4343W</id> | |
| <category>PSoC™ 6 BSPs</category> | |
| <board_uri>https://github.com/cypresssemiconductorco/TARGET_CY8CPROTO-062S3-4343W</board_uri> | |
| <chips> | |
| <mcu>CY8C6245LQI-S3D72</mcu> | |
| <radio>LBEE5KL1DX (CYW4343WKUBG)</radio> | |
| </chips> | |
| <name>CY8CPROTO-062S3-4343W</name> | |
| <summary>The PSoC™ 6 Wi-Fi Bluetooth® Prototyping Kit is a low-cost hardware platform that enables design and debug of the PSoC™ 6 MCUs. It comes with a Murata LBEE5KL1DX module, based on the CYW4343W combo device, industry-leading CAPSENSE™ for touch buttons and slider, on-board debugger/programmer with KitProg3, 512-Mb Quad-SPI NOR flash. This kit is designed with a snap-away form-factor, allowing the user to separate the different components and features that come with this kit and use independently.</summary> | |
| <prov_capabilities>adc bt can capsense capsense_button capsense_linear_slider cat1 cat1a comp csd cy8cproto_062s3_4343w cyw4343w cyw43xxx dma flash_512k hal i2c led low_power lptimer mcu_gp memory memory_qspi multi_core nor_flash psoc6 qspi rtc smart_io spi sram_256k std_crypto switch uart usb_device wifi</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div> <ul> <li>Support of up to 512 KB Flash and 256 KB SRAM</li> <li>Dedicated SDHC to interface with WICED wireless devices.</li> <li>Delivers dual-cores, with a 150-MHz Arm&#174; Cortex&#174;-M4 as the primary application processor and a 100-MHz Arm&#174; Cortex&#174;-M0+ as the secondary processor for low-power operations.</li> <li>Supports Full-Speed USB, capacitive-sensing with CAPSENSE&#8482;.</li> </ul> <div class="category">Kit Contents:</div> <ul> <li>PSoC&#8482; 6 Wi-Fi Bluetooth&#174; Prototyping board</li> <li>USB Type-A to Micro-B cable</li> <li>Quick Start Guide</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/CY8CPROTO-062S3-4343W</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 usb_host"> | |
| <num>Latest 4.X release</num> | |
| <commit>latest-v4.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 usb_host"> | |
| <num>4.2.0 release</num> | |
| <commit>release-v4.2.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>4.1.0 release</num> | |
| <commit>release-v4.1.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>4.0.0 release</num> | |
| <commit>release-v4.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>Latest 3.X release</num> | |
| <commit>latest-v3.X</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>3.1.1 release</num> | |
| <commit>release-v3.1.1</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>3.1.0 release</num> | |
| <commit>release-v3.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>3.0.0 release</num> | |
| <commit>release-v3.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.3.0 release</num> | |
| <commit>release-v2.3.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.1.0 release</num> | |
| <commit>release-v2.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.0.0 release</num> | |
| <commit>release-v2.0.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>CY8CPROTO-063-BLE</id> | |
| <category>PSoC™ 6 BSPs</category> | |
| <board_uri>https://github.com/cypresssemiconductorco/TARGET_CY8CPROTO-063-BLE</board_uri> | |
| <chips> | |
| <mcu>CYBLE-416045-02 (CY8C6347BZI-BLD53)</mcu> | |
| <radio>CYBLE-416045-02 (CY8C6347BZI-BLD53)</radio> | |
| </chips> | |
| <name>CY8CPROTO-063-BLE</name> | |
| <summary>The PSoC™ 6 BLE Prototyping Kit (CY8CPROTO-063-BLE) is a low-cost hardware platform that enables design and debug of PSoC™ 6 MCUs. This kit is designed with a snap-away form-factor, allowing users to separate the KitProg (on-board programmer and debugger) from the target board and use independently.</summary> | |
| <prov_capabilities>adc capsense cat1 cat1a comp csd cy8cproto_063_ble dac dma flash_1024k hal i2c led low_power lptimer mcu_gp multi_core opamp psoc6 rtc smart_io spi sram_288k std_crypto switch uart udb</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div> <ul> <li>Bluetooth&#174; LE 5.0 certified CYBLE-416045-02 EZ-BLE module with onboard crystal oscillators, trace antenna, passive components and PSoC&#8482; 63 MCU</li> <li>Up to 36 GPIOs in a 14x18.5x2 mm package</li> <li>Supports digital programmable logic, capacitive-sensing with CAPSENSE&#8482;, a PDM-PCM digital microphone interface, a Quad-SPI interface, high-performance analog-to-digital converter (ADC), low-power comparators, and standard communication and timing peripherals.</li> </ul> <div class="category">Kit Contents:</div> <ul> <li>PSoC&#8482; 6 BLE Prototyping Board</li> <li>USB Type-A to Micro-B cable</li> <li>Quick Start Guide</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/CY8CPROTO-063-BLE</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 bt i2s pdm"> | |
| <num>Latest 4.X release</num> | |
| <commit>latest-v4.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 bt i2s pdm"> | |
| <num>4.2.0 release</num> | |
| <commit>release-v4.2.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 bt"> | |
| <num>4.1.0 release</num> | |
| <commit>release-v4.1.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 bt"> | |
| <num>4.0.0 release</num> | |
| <commit>release-v4.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3 ble bt"> | |
| <num>Latest 3.X release</num> | |
| <commit>latest-v3.X</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3 ble bt"> | |
| <num>3.1.0 release</num> | |
| <commit>release-v3.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>3.0.0 release</num> | |
| <commit>release-v3.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.3.0 release</num> | |
| <commit>release-v2.3.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.1.0 release</num> | |
| <commit>release-v2.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.0.0 release</num> | |
| <commit>release-v2.0.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>CY8CPROTO-064B0S3</id> | |
| <category>PSoC™ 6 BSPs</category> | |
| <board_uri>https://github.com/cypresssemiconductorco/TARGET_CY8CPROTO-064B0S3</board_uri> | |
| <chips> | |
| <mcu>CYB06445LQI-S3D42</mcu> | |
| </chips> | |
| <name>CY8CPROTO-064B0S3</name> | |
| <summary>CY8CPROTO-064B0S3 PSoC™ 64 Secure Boot Prototyping Kit is a low-cost Prototyping Kit based on PSoC™ 64 Secure Boot MCU to enable customers to prototype and design with the PSoC™ 64 Secure Boot device.</summary> | |
| <prov_capabilities>adc cat1 cat1a comp cy8cproto_064b0s3 dma flash_448k hal i2c led low_power lptimer mcu_gp memory memory_qspi nor_flash psoc6 qspi rtc secure_boot smart_io spi sram_256k std_crypto uart usb_device</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>PSoC&#8482; 64 Secure MCU</li> <li>512-Mb Serial NOR flash</li> <li>Full-speed USB device interface</li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>PSoC&#8482; 64 SecureBoot Prototyping Board</li> <li>USB Type-A to Micro-B cable</li> <li>Quick start guide</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/CY8CPROTO-064B0S3</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 csd multi_core usb_host"> | |
| <num>Latest 4.X release</num> | |
| <commit>latest-v4.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 csd multi_core usb_host"> | |
| <num>4.2.0 release</num> | |
| <commit>release-v4.2.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>4.1.0 release</num> | |
| <commit>release-v4.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>Latest 3.X release</num> | |
| <commit>latest-v3.X</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>3.1.0 release</num> | |
| <commit>release-v3.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>3.0.0 release</num> | |
| <commit>release-v3.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.1" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="2.2.1" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.3.0 release</num> | |
| <commit>release-v2.3.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.1" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.2.0 release</num> | |
| <commit>release-v2.2.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.1" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.1.0 release</num> | |
| <commit>release-v2.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.1" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.0.0 release</num> | |
| <commit>release-v2.0.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>CY8CPROTO-064S1-SB</id> | |
| <category>PSoC™ 6 BSPs</category> | |
| <board_uri>https://github.com/cypresssemiconductorco/TARGET_CY8CPROTO-064S1-SB</board_uri> | |
| <chips> | |
| <mcu>CYB06447BZI-D54</mcu> | |
| </chips> | |
| <name>CY8CPROTO-064S1-SB</name> | |
| <summary>CY8CPROTO-064S1-SB PSoC™ 64 Secure Boot Prototyping Kit is a low-cost Prototyping Kit based on PSoC™ 64 Secure Boot MCU to enable customers to prototype and design with the PSoC™ 64 Secure Boot device.</summary> | |
| <prov_capabilities>adc cat1 cat1a comp cy8cproto_064s1_sb dac dma flash_832k hal i2c led low_power lptimer mcu_gp memory memory_qspi nor_flash opamp psoc6 qspi rtc secure_boot spi sram_288k std_crypto switch uart usb_device</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>PSoC&#8482; 64 Secure MCU</li> <li>512-Mb Serial NOR flash</li> <li>Full-speed USB device interface</li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>PSoC&#8482; 64 SecureBoot Prototyping Board</li> <li>USB Type-A to Micro-B cable</li> <li>Quick start guide</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/CY8CPROTO-064S1-SB</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 csd i2s multi_core pdm smart_io udb usb_host"> | |
| <num>Latest 4.X release</num> | |
| <commit>latest-v4.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 csd i2s multi_core pdm smart_io udb usb_host"> | |
| <num>4.2.0 release</num> | |
| <commit>release-v4.2.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>4.1.0 release</num> | |
| <commit>release-v4.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>Latest 3.X release</num> | |
| <commit>latest-v3.X</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>3.1.0 release</num> | |
| <commit>release-v3.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>3.0.0 release</num> | |
| <commit>release-v3.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.1" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="2.2.1" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.3.0 release</num> | |
| <commit>release-v2.3.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.1" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.2.0 release</num> | |
| <commit>release-v2.2.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.1" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.1.0 release</num> | |
| <commit>release-v2.1.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>CYBLE-416045-EVAL</id> | |
| <category>PSoC™ 6 BSPs</category> | |
| <board_uri>https://github.com/cypresssemiconductorco/TARGET_CYBLE-416045-EVAL</board_uri> | |
| <chips> | |
| <mcu>CYBLE-416045-02 (CY8C6347BZI-BLD53)</mcu> | |
| <radio>CYBLE-416045-02 (CY8C6347BZI-BLD53)</radio> | |
| </chips> | |
| <name>CYBLE-416045-EVAL</name> | |
| <summary>The EZ-BLE Arduino Evaluation Board (CYBLE-416045-EVAL) enables you to evaluate and develop applications on the CYBLE-416045-02 EZ-BLE Creator Module. CYBLE-416045-EVAL can be used as a standalone evaluation kit or can be combined with Arduino compatible shields.</summary> | |
| <prov_capabilities>adc arduino cat1 cat1a comp cyble_416045_eval dac dma flash_1024k hal i2c i2s j2 led low_power lptimer mcu_gp multi_core opamp pdm psoc6 rgb_led rtc smart_io spi sram_288k std_crypto switch uart udb</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div> <ul> <li>Bluetooth&#174; LE 5.0 certified CYBLE-416045-02 EZ-BLE module with onboard crystal oscillators, trace antenna, passive components and PSoC&#8482; 63 MCU</li> <li>Up to 36 Arduino-compatible GPIO headers</li> <li>Supports digital programmable logic, a PDM-PCM digital microphone interface, high-performance analog-to- digital converter (ADC), low-power comparators, and standard communication and timing peripherals.</li> </ul> <div class="category">Kit Contents:</div> <ul> <li>EZ-BLE Arduino Evaluation Board (CYBLE-416045-EVAL) with on-board EZ-BLE Creator Module (CYBLE-416045-02)</li> <li>USB Type-A to Micro-USB cable</li> <li>Quick Start Guide</li> </ul></description> | |
| <documentation_url>https://www.cypress.com/documentation/development-kitsboards/cyble-416045-eval-ez-ble-arduino-evaluation-board</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 bt csd"> | |
| <num>Latest 4.X release</num> | |
| <commit>latest-v4.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 bt csd"> | |
| <num>4.2.0 release</num> | |
| <commit>release-v4.2.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 bt"> | |
| <num>4.1.0 release</num> | |
| <commit>release-v4.1.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 bt"> | |
| <num>4.0.0 release</num> | |
| <commit>release-v4.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3 ble bt"> | |
| <num>Latest 3.X release</num> | |
| <commit>latest-v3.X</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3 ble bt"> | |
| <num>3.1.0 release</num> | |
| <commit>release-v3.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>3.0.0 release</num> | |
| <commit>release-v3.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.3.0 release</num> | |
| <commit>release-v2.3.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.1.0 release</num> | |
| <commit>release-v2.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.0.0 release</num> | |
| <commit>release-v2.0.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>CYSBSYSKIT-01</id> | |
| <category>PSoC™ 6 BSPs</category> | |
| <board_uri>https://github.com/cypresssemiconductorco/TARGET_CYSBSYSKIT-01</board_uri> | |
| <chips> | |
| <mcu>CY8C624AFNI-S2D43</mcu> | |
| <radio>CYW43012TC0KFFBH</radio> | |
| </chips> | |
| <name>CYSBSYSKIT-01</name> | |
| <summary>CYSBSYSKIT-01: Pre-configured Rapid IoT Connect Platform RP01 Feather Kit with a CYSBSYS-RP01 Rapid IoT Connect module which enables a secure, scalable, and reliable connection to cloud. CYSBSYS-RP01 is a pre-certified 802.11ac-friendly dual- band (2.4 and 5.0 GHz) Wi-Fi and Bluetooth®5.0-compliant combo radio module. </summary> | |
| <prov_capabilities>adc anycloud bt cat1 cat1a comp cysbsyskit_01 cyw43012 cyw43xxx dma feather flash_2048k hal i2c led lptimer mcu_gp memory memory_qspi nor_flash psoc6 qspi smart_io spi sram_1024k switch uart wifi</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div> <ul> <li>CYSBSYS-RP01 module with managed firmware for device management and radio chip. </li> <li>512KB Flash and 512KB SRAM for customer application on CM4</li> <li>512-Mbit external Quad SPI NOR Flash that provides a fast, expandable memory for data and code</li> <li>KitProg3 on-board SWD programmer/debugger, USB-UART, and USB-I2C bridge functionality</li> <li>A user LED, a user button, and a reset button</li> <li>Battery connector, charging IC, and charging indicator LED</li> <li>One KitProg3 mode button, one KitProg3 status LED, and one KitProg3 power LED</li> <li>OPTIGA Trust M advanced security controller for secure data storage</li> <li>Thermistor for sensing the ambient temperature</li> <li>16KB of Emulated EEPROM</li> <li>Feather compatible pin header</li> </ul> <div class="category">Kit Contents:</div> <ul> <li>CYSBSYSKIT-01 Rapid IoT Connect Platform RP01 Feather Kit</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/cms/en/product/evaluation-boards/CYSBSYSKIT-01</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 csd i2s low_power multi_core pdm rtc"> | |
| <num>Latest 4.X release</num> | |
| <commit>latest-v4.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 csd i2s low_power multi_core pdm rtc"> | |
| <num>4.2.0 release</num> | |
| <commit>release-v4.2.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>4.1.0 release</num> | |
| <commit>release-v4.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>Latest 3.X release</num> | |
| <commit>latest-v3.X</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>3.1.0 release</num> | |
| <commit>release-v3.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>3.0.0 release</num> | |
| <commit>release-v3.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.3.0 release</num> | |
| <commit>release-v2.3.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.1.0 release</num> | |
| <commit>release-v2.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.0.1 release</num> | |
| <commit>release-v2.0.1</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.0.0 release</num> | |
| <commit>release-v2.0.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>CYSBSYSKIT-DEV-01</id> | |
| <category>PSoC™ 6 BSPs</category> | |
| <board_uri>https://github.com/cypresssemiconductorco/TARGET_CYSBSYSKIT-DEV-01</board_uri> | |
| <chips> | |
| <mcu>CY8C624AFNI-S2D43</mcu> | |
| <radio>CYW43012TC0KFFBH</radio> | |
| </chips> | |
| <name>CYSBSYSKIT-DEV-01</name> | |
| <summary>The CYSBSYSKIT-DEV-01 Rapid IoT Connect Developer Kit allows for evaluation of the CYSBSYS-RP01 Rapid IoT Connect module on a standard Feather form factor. The CYSBSYS-RP01 Rapid IoT Connect module is a turnkey module that enables secure, scalable, and reliable compute and connect.</summary> | |
| <prov_capabilities>adc anycloud bt cat1 cat1a comp cysbsyskit_dev_01 cyw43012 cyw43xxx dma feather flash_2048k hal i2c led low_power lptimer mcu_gp memory memory_qspi multi_core nor_flash optiga_trust_m psoc6 qspi rtc smart_io spi sram_1024k std_crypto switch uart wifi</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div> <ul> <li>CYSBSYS-RP01 module</li> <li>Free application processor (150-MHz Arm&#174; Cortex&#174;-M4) and secondary processor (100-MHz Arm&#174; Cortex&#174;-M0+)</li> <li>Support of up to 2MB Flash and 1MB SRAM</li> <li>512-Mbit external Quad SPI NOR Flash that provides a fast, expandable memory for data and code</li> <li>KitProg3 on-board SWD programmer/debugger, USB-UART, and USB-I2C bridge functionality</li> <li>A user LED, a user button, and a reset button</li> <li>Battery connector, charging IC, and charging indicator LED</li> <li>One KitProg3 mode button, one KitProg3 status LED, and one KitProg3 power LED</li> <li>OPTIGA Trust M advanced security controller for secure data storage</li> <li>Thermistor for sensing the ambient temperature</li> <li>Feather compatible pin header</li> </ul> <div class="category">Kit Contents:</div> <ul> <li>CYSBSYSKIT-DEV-01 Rapid IoT Connect Developer Edition Kit</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/cms/en/product/evaluation-boards/CYSBSYSKIT-DEV-01</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 csd i2s pdm"> | |
| <num>Latest 4.X release</num> | |
| <commit>latest-v4.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 csd i2s pdm"> | |
| <num>4.2.0 release</num> | |
| <commit>release-v4.2.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>4.1.0 release</num> | |
| <commit>release-v4.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>Latest 3.X release</num> | |
| <commit>latest-v3.X</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>3.1.0 release</num> | |
| <commit>release-v3.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>3.0.0 release</num> | |
| <commit>release-v3.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.3.0 release</num> | |
| <commit>release-v2.3.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.1.0 release</num> | |
| <commit>release-v2.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.0.0 release</num> | |
| <commit>release-v2.0.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>KIT-BGT60TR13C-EMBEDD</id> | |
| <category>PSoC™ 6 BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_KIT-BGT60TR13C-EMBEDD</board_uri> | |
| <chips> | |
| <mcu>CY8C6247FDI-D02</mcu> | |
| </chips> | |
| <name>KIT-BGT60TR13C-EMBEDD</name> | |
| <summary>The KIT-BGT60TR13C-EMBEDD Radar Embedded Kit allows for evaluation of the XENSIV&#8482; BGT60TR13C sensor on a standardFeather form factor.</summary> | |
| <prov_capabilities>adc cat1 cat1a comp dac dma feather flash_1024k hal i2c j2 kit_bgt60tr13c_embedd led low_power lptimer mcu_gp memory multi_core optiga_trust_b psoc6 rgb_led rtc smart_io spi sram_288k switch uart usb_device usb_host</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>Delivers dual-cores, with a 150-MHz Arm&#174; Cortex&#174;-M4 as the primary application processor and a 100-MHz Arm&#174; Cortex&#174;-M0+ as the secondary processor. </li> <li>1024-KB Flash and 288-KB SRAM for customer application on CM4</li> <li>One-time-programmable (OTP) 1-Kb eFuse array</li> <li>Two 12-bit 2-Msps SAR ADCs with synchronized sampling, differential and single-ended modes, 16-channel sequencer with result averaging, and Deep Sleep operation </li> <li>Two low-power comparators available in Deep Sleep and Hibernate modes</li> <li>Full-speed USB</li> <li>A user LED, a user button, and a reset button</li> <li>CY7C65213A-32LTXI for USB-UART bridge functionality</li> <li>OPTIGA Trust B for authentication</li> <li>Feather compatible pin header</li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>KIT-BGT60TR13C-EMBEDD evaluation board</li> <li>USB Type-A to Micro-B cable</li> <li>Quick Start Guide</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/cms/en/applications/solutions/sensor-solutions/presence-detection/</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 i2s pdm qspi"> | |
| <num>Latest 4.X release</num> | |
| <commit>latest-v4.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 i2s pdm qspi"> | |
| <num>4.2.0 release</num> | |
| <commit>release-v4.2.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>4.1.0 release</num> | |
| <commit>release-v4.1.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>4.0.0 release</num> | |
| <commit>release-v4.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>Latest 3.X release</num> | |
| <commit>latest-v3.X</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>3.1.0 release</num> | |
| <commit>release-v3.1.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>CYW9P62S1-43012EVB-01</id> | |
| <category>PSoC™ 6 BSPs</category> | |
| <board_uri>https://github.com/cypresssemiconductorco/TARGET_CYW9P62S1-43012EVB-01</board_uri> | |
| <chips> | |
| <mcu>WM-BAC-CYW-50 (CY8C6247FDI-D52)</mcu> | |
| <radio>WM-BAC-CYW-50 (CYW43012TC0EKUBG)</radio> | |
| </chips> | |
| <name>CYW9P62S1-43012EVB-01</name> | |
| <summary>The CYW9P62S1-43012EVB-01 Kit is a low-cost hardware platform that enables design and debug of the USI WM-BAC-CYW-50 Module. USI WM-BAC-CYW-50 is a System in Package (SiP) module that contains the PSoC™ 62 MCU (CY8C6247FDI-D52) and the radio part CYW43012 (WiFi + Bluetooth® Combo Chip).</summary> | |
| <prov_capabilities>adc anycloud arduino bt capsense capsense_button capsense_linear_slider cat1 cat1a comp csd cyw43012 cyw43xxx cyw9p62s1_43012evb_01 dac dma flash_1024k fram hal i2c i2s led low_power lptimer mcu_gp memory memory_qspi multi_core nor_flash opamp pdm psoc6 qspi rtc smart_io spi sram_288k std_crypto switch uart udb usb_device wifi</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>Support of up to 1MB Flash and 288KB SRAM</li> <li>Bluetooth&#174; LE v5.0</li> <li>IEEE 802.11n, 802.11ac friendly WLAN</li> <li>Full-speed USB</li> <li>Serial memory interface</li> <li>Industry-leading CAPSENSE&#8482;lt;/li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>PSoC&#8482; 6S2 Wi-Fi Bluetooth® Pioneer Board</li> <li>USB Type-A to Micro-B cable</li> <li>Quick Start Guide</li> <li>Four jumper wires (4 inches each)</li> <li>Two jumper wires (5 inches each)</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/CYW9P62S1-43012EVB-01</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 usb_host"> | |
| <num>Latest 4.X release</num> | |
| <commit>latest-v4.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 usb_host"> | |
| <num>4.2.0 release</num> | |
| <commit>release-v4.2.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>4.1.0 release</num> | |
| <commit>release-v4.1.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>4.0.0 release</num> | |
| <commit>release-v4.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>Latest 3.X release</num> | |
| <commit>latest-v3.X</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>3.1.0 release</num> | |
| <commit>release-v3.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>3.0.0 release</num> | |
| <commit>release-v3.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.3.0 release</num> | |
| <commit>release-v2.3.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.1.0 release</num> | |
| <commit>release-v2.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.0.0 release</num> | |
| <commit>release-v2.0.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>CYW9P62S1-43438EVB-01</id> | |
| <category>PSoC™ 6 BSPs</category> | |
| <board_uri>https://github.com/cypresssemiconductorco/TARGET_CYW9P62S1-43438EVB-01</board_uri> | |
| <chips> | |
| <mcu>AW-CU427 (CY8C6247BZI-D54)</mcu> | |
| <radio>AW-CU427 (CYW43438KUBG)</radio> | |
| </chips> | |
| <name>CYW9P62S1-43438EVB-01</name> | |
| <summary>The CYW9P62S1-43438EVB-01 Kit is a low-cost hardware platform that enables design and debug of the Azurewave AW-CU427 Module. AW-CU427 is a System in Package (SiP) module that contains the MCU part, PSoC™ 62 MCU (CY8C6247BZI-D54) and the radio part CYW43438 ( WiFi + Bluetooth® Combo Chip).</summary> | |
| <prov_capabilities>adc anycloud arduino bt capsense capsense_button capsense_linear_slider cat1 cat1a comp csd cyw43438 cyw43xxx cyw9p62s1_43438evb_01 dac dma flash_1024k fram hal i2c i2s j2 led low_power lptimer mcu_gp memory memory_qspi multi_core nor_flash opamp pdm pot psoc6 qspi rgb_led rtc smart_io spi sram_288k std_crypto switch uart udb usb_device usb_host wifi</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>Support of up to 1MB Flash and 288KB SRAM</li> <li>Bluetooth&#174; LE v4.2</li> <li>IEEE 802.11a/b/g/n WLAN</li> <li>Full-speed USB</li> <li>Serial memory interface</li> <li>Industry-leading CAPSENSE&#8482;lt;/li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>PSoC&#8482; 6S2 Wi-Fi Bluetooth® Pioneer Board</li> <li>USB Type-A to Micro-B cable</li> <li>Quick Start Guide</li> <li>Four jumper wires (4 inches each)</li> <li>Two jumper wires (5 inches each)</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/CYW9P62S1-43438EVB-01</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>Latest 4.X release</num> | |
| <commit>latest-v4.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>4.2.0 release</num> | |
| <commit>release-v4.2.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>4.1.0 release</num> | |
| <commit>release-v4.1.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>4.0.0 release</num> | |
| <commit>release-v4.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>Latest 3.X release</num> | |
| <commit>latest-v3.X</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>3.1.0 release</num> | |
| <commit>release-v3.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>3.0.0 release</num> | |
| <commit>release-v3.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.3.0 release</num> | |
| <commit>release-v2.3.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.1.0 release</num> | |
| <commit>release-v2.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.0.0 release</num> | |
| <commit>release-v2.0.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>PSOC6-GENERIC</id> | |
| <category>PSoC™ 6 BSPs</category> | |
| <board_uri>https://github.com/cypresssemiconductorco/TARGET_PSOC6-GENERIC</board_uri> | |
| <chips> | |
| <mcu>CY8C6347BZI-BLD53</mcu> | |
| </chips> | |
| <name>PSOC6-GENERIC</name> | |
| <summary>This board support package is intended for creating custom PSoC™ 6 BSPs.</summary> | |
| <prov_capabilities>cat1 cat1a hal low_power mcu_gp psoc6 rtc</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>This is a generic template, there is no corresponding physical board and hence no board-specific macros. The user is expected to create a custom BSP with various pin/hardware details - Refer to KBA230822. Code examples using kit/board resources will not be shown for this BSP until the manifest data for the BSP is updated to include additional capabilities. Refer to ModusToolbox&#8482; user guide for creating custom manifests.</li> <li>This manifest can also be used to allow the board to show up in the ModusToolbox&#8482; tools</li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>NA</li> </ul></description> | |
| <documentation_url>https://github.com/Infineon/TARGET_PSOC6-GENERIC</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 psoc6_generic"> | |
| <num>Latest 4.X release</num> | |
| <commit>latest-v4.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 psoc6_generic"> | |
| <num>4.2.0 release</num> | |
| <commit>release-v4.2.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>4.0.0 release</num> | |
| <commit>release-v4.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>Latest 3.X release</num> | |
| <commit>latest-v3.X</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>3.1.0 release</num> | |
| <commit>release-v3.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3"> | |
| <num>3.0.0 release</num> | |
| <commit>release-v3.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.3.0 release</num> | |
| <commit>release-v2.3.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.1.0 release</num> | |
| <commit>release-v2.1.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>2.0.0 release</num> | |
| <commit>release-v2.0.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>CYW920829-KEYBOARD</id> | |
| <category>AIROC™ Bluetooth® BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_CYW920829-KEYBOARD</board_uri> | |
| <chips> | |
| <mcu>CYW20829B0LKML</mcu> | |
| <radio>CYW20829B0LKML</radio> | |
| </chips> | |
| <name>CYW920829-KEYBOARD</name> | |
| <summary> The AIROC&#8482; CYW20829 keyboard reference solution is an ultra-low power keyboard design with multi-host support that demonstrates Bluetooth&#174; LE HID over GATT profile It comes with the right combination of low power and high performance dual core Arm&#174; Cortex&#174; M33 to meet the demands of battery powered keyboard.</summary> | |
| <prov_capabilities>ble bsp_gen4 bt cat1 cat1b cyw20829 cyw920829_keyboard flash_0k hal i2s low_power mcu_gp memory memory_qspi mxsv2 nor_flash pdm qspi rtc sdhc smart_io sram_64k std_crypto</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>32-bit CPU subsystem with Arm&#174; Cortex&#174; M33</li> <li>256-KB SRAM with power and data retention control</li> <li>Low power 1.7 - 3.0 V operation</li> <li>Bluetooth&#174; LE 5.4 core spec-compliant</li> <li>Battery voltage measurement with 16 bit ADC</li> <li>5-pin SWD connectors</li> <li>Built-in Keyscan matrix pre-configured for 79 keys layout</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/cms/en/product/wireless-connectivity/airoc-bluetooth-le-bluetooth-multiprotocol/airoc-bluetooth-le/cyw20829/#!documents</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>Latest 1.X release</num> | |
| <commit>latest-v1.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>1.0.3 release</num> | |
| <commit>release-v1.0.3</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>1.0.2 release</num> | |
| <commit>release-v1.0.2</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>1.0.1 release</num> | |
| <commit>release-v1.0.1</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>CYW920829-MOUSE</id> | |
| <category>AIROC™ Bluetooth® BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_CYW920829-MOUSE</board_uri> | |
| <chips> | |
| <mcu>CYW20829B0LKML</mcu> | |
| <radio>CYW20829B0LKML</radio> | |
| </chips> | |
| <name>CYW920829-MOUSE</name> | |
| <summary> The AIROC&#8482; CYW20829 mouse reference solution is an ultra-low power mouse design with multi-host support that demonstrates Bluetooth&#174; LE HID over GATT profile It comes with the right combination of low power and high performance dual core Arm&#174; Cortex&#174; M33 to meet the demands of battery powered mouse.</summary> | |
| <prov_capabilities>ble bsp_gen4 bt cat1 cat1b cyw20829 cyw920829_mouse flash_0k hal i2s low_power mcu_gp memory memory_qspi mxsv2 nor_flash pdm qspi rtc sdhc smart_io spi sram_64k std_crypto</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>32-bit CPU subsystem with Arm&#174; Cortex&#174; M33</li> <li>256-KB SRAM with power and data retention control</li> <li>Low power 2.1 - 3.0 V operation</li> <li>Bluetooth&#174; LE 5.4 core spec-compliant</li> <li>Battery voltage measurement with 16 bit ADC</li> <li>5-pin SWD connectors</li> <li>Left, Right, Middle and DPI buttons</li> <li>SPI based optical motion sensor</li> <li>F-switch Quadrature Encoder for scroll wheel</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/cms/en/product/wireless-connectivity/airoc-bluetooth-le-bluetooth-multiprotocol/airoc-bluetooth-le/cyw20829/#!documents</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="spi"> | |
| <num>Latest 1.X release</num> | |
| <commit>latest-v1.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="spi"> | |
| <num>1.0.3 release</num> | |
| <commit>release-v1.0.3</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="spi"> | |
| <num>1.0.2 release</num> | |
| <commit>release-v1.0.2</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="spi"> | |
| <num>1.0.1 release</num> | |
| <commit>release-v1.0.1</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>CYW920829-VR</id> | |
| <category>AIROC™ Bluetooth® BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_CYW920829-VR</board_uri> | |
| <chips> | |
| <mcu>CYW20829B0LKML</mcu> | |
| <radio>CYW20829B0LKML</radio> | |
| </chips> | |
| <name>CYW920829-VR</name> | |
| <summary> The AIROC&#8482; CYW20829 Bluetooth&#174; LE SoC is a Bluetooth&#174; 5.4 core spec-compliant for IoT, HID, smart home and industrial applications. It comes with the right combination of low power and high performance dual core Arm&#174; Cortex&#174; M33 to meet the high demands of Bluetooth&#174; LE Applications.</summary> | |
| <prov_capabilities>ble bt cat1 cat1b cyw20829 cyw920829_vr flash_0k hal i2s low_power mcu_gp memory memory_qspi mxsv2 nor_flash pdm qspi rtc sdhc smart_io sram_64k std_crypto</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>32-bit CPU subsystem with Arm&#174; Cortex&#174; M33</li> <li>256-KB SRAM with power and data retention control</li> <li>Low power 1.7 - 3.6 V operation</li> <li>ADCMic with Audio and DC measurement capability</li> <li>Connectors for battery</li> <li>10-pin SWD connectors</li> <li>Up to 26 programmable GPIOs</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/cms/en/product/wireless-connectivity/airoc-bluetooth-le-bluetooth-multiprotocol/airoc-bluetooth-le/cyw20829/#!documents</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>Latest 1.X release</num> | |
| <commit>latest-v1.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>1.0.3 release</num> | |
| <commit>release-v1.0.3</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>1.0.2 release</num> | |
| <commit>release-v1.0.2</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>1.0.1 release</num> | |
| <commit>release-v1.0.1</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>CYW920829M2EVK-02</id> | |
| <category>AIROC™ Bluetooth® BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_CYW920829M2EVK-02</board_uri> | |
| <chips> | |
| <mcu>CYW20829B0LKML</mcu> | |
| <radio>CYW20829B0LKML</radio> | |
| </chips> | |
| <name>CYW920829M2EVK-02</name> | |
| <summary> The Infineon AIROC&#8482; CYW20829 Bluetooth&#174; LE evaluation kit (CYW92089M2EVK-02) enables evaluation, prototyping, and development of a wide array of IoT applications using the AIROC&#8482; CYW20829, a low power and high performance Bluetooth&#174; LE MCU. <p/> The AIROC&#8482; CYW20829 Bluetooth&#174; LE MCU provides reliable Bluetooth&#174; connectivity, core spec compliant to 5.4. It is a highly integrated device with an Arm&#174; Cortex&#174; M33 that is dedicated for customer applications, and an integrated power amplifier with 10 dBm of transmit output power. The AIROC&#8482; CYW20829 is ideal for a wide range of applications in home and industrial automation, sensors, lighting, Bluetooth&#174; mesh, remote controls and any other Bluetooth&#174; LE connected IoT application. <p/> The AIROC&#8482; CYW20829 Bluetooth&#174; LE evaluation kit (CYW920829M2EVK-02) and ModusToolbox&#8482; software and tools form a powerful but easy to use toolset that helps developers create amazing Bluetooth&#174; enabled IoT solutions. <p/> The Code Examples available for CYW920829M2EVK-02 EVK are also applicable to CYW920829B0M2P4TAI100-EVK and CYW920829B0M2P4EPI100-EVK. There are no separate BSPs for the module EVKs, same CYW920829M2EVK-02 BSP is used for Module EVKs as well.</summary> | |
| <prov_capabilities>ble bsp_gen4 bt cat1 cat1b cyw20829 cyw920829m2evk_02 flash_0k hal i2s led low_power mcu_gp memory memory_qspi mesh mxsv2 nor_flash pdm qspi rtc sdhc smart_io sram_64k std_crypto switch</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>AIROC&#8482; CYW20829 Bluetooth&#174; LE MCU in 56 pin QFN package</li> <li>Arduino compatible headers for hardware expansion</li> <li>On-board sensors - 6-axis IMU, thermistor, Infineon analog microphone, and Infineon digital microphone</li> <li>User switches, RGB LED and user LEDs</li> <li>USB connector for power, programming and USB-UART bridge</li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>CYW20829 evaluation board (CYW9BTM2BASE3+CYW920829M2IPA2)</li> <li>USB Type-A to Micro-B cable</li> <li>Six jumper wires (five inches each)</li> <li>Quick start guide</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/cms/en/product/wireless-connectivity/airoc-bluetooth-le-bluetooth-multiprotocol/airoc-bluetooth-le/cyw20829/#!documents</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>Latest 1.X release</num> | |
| <commit>latest-v1.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>1.0.4 release</num> | |
| <commit>release-v1.0.4</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>1.0.3 release</num> | |
| <commit>release-v1.0.3</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>1.0.2 release</num> | |
| <commit>release-v1.0.2</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>1.0.1 release</num> | |
| <commit>release-v1.0.1</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>CYW989829M2EVB-01</id> | |
| <category>AIROC™ Bluetooth® BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_CYW989829M2EVB-01</board_uri> | |
| <chips> | |
| <mcu>CYW89829B0232</mcu> | |
| <radio>CYW89829B0232</radio> | |
| </chips> | |
| <name>CYW989829M2EVB-01</name> | |
| <summary> The Infineon AIROC&#8482; CYW89829 Bluetooth&#174; LE evaluation board (CYW989829M2EVB-01) enables evaluation, prototyping, and development of a wide array of Industrial and Automotive IoT applications using the AIROC&#8482; CYW89829, a low power and high performance Bluetooth&#174; LE MCU. <p/> The AIROC&#8482; CYW89829 Bluetooth&#174; LE MCU provides reliable Bluetooth&#174; connectivity, core spec compliant to 5.4. It is a highly integrated device with an Arm&#174; Cortex&#174; M33 that is dedicated for customer applications, and an integrated power amplifier with 10 dBm of transmit output power. The AIROC&#8482; CYW89829 is optimal solution for automotive and industrial use cases such as car access, battery managment system, automotive sensors, and other applications requiring Automotive AECQ-100 Grade-2 qualification.</summary> | |
| <prov_capabilities>adc ble bsp_gen4 bt can cat1 cat1b cyw89829 cyw989829m2evb_01 dma flash_0k hal i2c i2s led lin low_power lptimer mcu_gp memory memory_qspi mesh mxsv2 nor_flash pdm qspi rtc smart_io spi sram_256k std_crypto switch tdm uart</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>AIROC&#8482; CYW89829 Bluetooth&#174; LE MCU in 77 pin BGA SIP package</li> <li>Arduino compatible headers for hardware expansion</li> <li>10-pin SWD connectors</li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>CYW89829 evaluation board (CYW9BTM2AUAD+CYW989829SIPM2IPA1)</li> <li>USB-UART cable</li> <li>Quick start guide</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/cms/en/product/promopages/airoc20829/</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>Latest 1.X release</num> | |
| <commit>latest-v1.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>1.0.4 release</num> | |
| <commit>release-v1.0.4</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>1.0.3 release</num> | |
| <commit>release-v1.0.3</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="cyw20829"> | |
| <num>1.0.1 release</num> | |
| <commit>release-v1.0.1</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>CYW955913EVK-01</id> | |
| <category>AIROC™ Connectivity BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_CYW955913EVK-01</board_uri> | |
| <chips> | |
| <mcu>CYW55913IUBGT</mcu> | |
| <radio>CYW55913IUBGT</radio> | |
| </chips> | |
| <name>CYW955913EVK-01</name> | |
| <summary>The Infineon CYW55913 is ultra-lower power, single-chip, connected MCU that supports 1x1 Wi-Fi 6/6E, Bluetooth® Low Energy 5.3, Matter, IP networking, with integrated PMU, targeted at Internet-of-Things (IoT) applications for stand-alone operation or to offload a host-processor. An integrated 192 MHz Arm® Cortex®-CM33, runs the Wi-Fi and Networking Stacks, Bluetooth® LE 5.3 and supports a wide array of peripherals. <p/> The CYW55913 is a low-power, single-chip device that supports single-stream, tri-band((2.4 GHz, and 5-7 GHz)), Wi-Fi 6/6E, IEEE 802.11ax-compliant Wi-Fi MAC/baseband/radio and Bluetooth&#174; Low Energy 5.3. In 802.11ax mode, the device supports rates up to 1024 QAM MCS11 in 20 MHz channels.</summary> | |
| <prov_capabilities>anycloud bsp_gen4 bt cat5 cyw55913 cyw55xxx cyw955913evk_01 flash_0k hal i2c i2s led low_power mcu_gp memory memory_qspi nor_flash pdm psram qspi rtc sdio spi sram_768k switch tdm uart wifi</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div> <ul> <li>Arduino compatible headers for hardware expansion.</li> <li>On-board sensors - A Digital Ambient Light Sensor (TSL25403) and a Potentiometer.</li> <li>Two IFX PDM Microphone (IM69D130) and one Analog Microphone (IM73A135).</li> <li>User switches and LEDs</li> <li>USB Type-C connector for power, programming, and USB-UART bridge</li> </ul><p/> <div class="category">Kit Contents:</div> <ul> <li>CYW55913 evaluation board</li> <li>M.2 to FFC adapter board</li> <li>30-pin FFC cable </li> <li>USB Type-C to Type-C cable</li> <li>Six jumper wires (5 inches each)</li> <li>Quick Start Guide</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/cms/en/product/wireless-connectivity/airoc-bluetooth-le-bluetooth-multiprotocol/airoc-bluetooth-le/cyw55913/#!documents</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.2.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>Latest 1.X release</num> | |
| <commit>latest-v1.X</commit> | |
| </version> | |
| <version tools_min_version="3.2.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>1.0.0 release</num> | |
| <commit>release-v1.0.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>KIT_XMC11_BOOT_001</id> | |
| <category>XMC™ BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_KIT_XMC11_BOOT_001</board_uri> | |
| <chips> | |
| <mcu>XMC1100-T038x0064</mcu> | |
| </chips> | |
| <name>KIT_XMC11_BOOT_001</name> | |
| <summary> The XMC1100 CPU Card for Arduino has two rows of pin headers which fully compatible with Arduino shield. <p><b>Note:</b></p> <p>Programming this kit requires installing <a href="https://www.segger.com/downloads/jlink/#J-LinkSoftwareAndDocumentationPack">SEGGER J-Link software</a>.</p></summary> | |
| <prov_capabilities>adc cat3 flash_64k i2c kit_xmc11_boot_001 led mcu_gp rtc spi sram_16k uart xmc xmc1000</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>XMC1100 Microcontroller in TSSOP-38 with 64 KB Flash and full peripheral set of XMC1100 series</li> <li>On board Debugger for downloading and debugging of application code</li> <li>Virtual COM port for UART communication with terminal program e.g. Hyperterminal</li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>KIT_XMC11_BOOT_001 evaluation board</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/cms/en/product/evaluation-boards/kit_xmc11_boot_001/</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 ccu4 low_power"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 ccu4 low_power"> | |
| <num>2.2.1 release</num> | |
| <commit>release-v2.2.1</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 ccu4 low_power"> | |
| <num>2.2.0 release</num> | |
| <commit>release-v2.2.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 ccu4"> | |
| <num>2.1.0 release</num> | |
| <commit>release-v2.1.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>KIT_XMC12_BOOT_001</id> | |
| <category>XMC™ BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_KIT_XMC12_BOOT_001</board_uri> | |
| <chips> | |
| <mcu>XMC1200-T038x0200</mcu> | |
| </chips> | |
| <name>KIT_XMC12_BOOT_001</name> | |
| <summary> The XMC1200 CPU Card (CPU-12 A-V1) houses the XMC1200 Microcontroller and a 2x30 pin edge for application expansion. This board along with application cards (e.g. LED Lighting Application Card) demonstrates the capabilities of XMC1200. The main use case for this board is to demonstrate the generic features of XMC1200 device including tool chain. The focus is safe operation under evaluation conditions. The board is neither cost nor size optimized and does not serve as a reference design. <p><b>Note:</b></p> <p>Programming this kit requires installing <a href="https://www.segger.com/downloads/jlink/#J-LinkSoftwareAndDocumentationPack">SEGGER J-Link software</a>.</p></summary> | |
| <prov_capabilities>adc cat3 comp flash_200k i2c i2s kit_xmc12_boot_001 led mcu_gp rtc spi sram_16k uart xmc xmc1000</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>XMC1200 Microcontroller in TSSOP-38 with 200KB Flash and full peripheral set of XMC1200 series</li> <li>On board Debugger for downloading and debugging of application code</li> <li>Virtual COM port for UART communication with terminal program e.g. Hyperterminal</li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>KIT_XMC12_BOOT_001 evaluation board</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/cms/en/product/evaluation-boards/kit_xmc12_boot_001/</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 ccu4 low_power"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 ccu4 low_power"> | |
| <num>2.2.1 release</num> | |
| <commit>release-v2.2.1</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 ccu4 low_power"> | |
| <num>2.2.0 release</num> | |
| <commit>release-v2.2.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 ccu4"> | |
| <num>2.1.0 release</num> | |
| <commit>release-v2.1.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>KIT_XMC13_BOOT_001</id> | |
| <category>XMC™ BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_KIT_XMC13_BOOT_001</board_uri> | |
| <chips> | |
| <mcu>XMC1302-T038x0200</mcu> | |
| </chips> | |
| <name>KIT_XMC13_BOOT_001</name> | |
| <summary> The XMC1300 CPU board (CPU-13 A-V1) houses the XMC1300 Microcontroller and a 2x30 pin edge for application expansion. The board along with application cards (e.g. Color LED Card, White LED Card) demonstrates the capabilities of XMC1300. The main use case for this board is to demonstrate the generic features of XMC1300 device including tool chain. The focus is safe operation under evaluation conditions. The board is neither cost nor size optimized and does not serve as a reference design. <p><b>Note:</b></p> <p>Programming this kit requires installing <a href="https://www.segger.com/downloads/jlink/#J-LinkSoftwareAndDocumentationPack">SEGGER J-Link software</a>.</p></summary> | |
| <prov_capabilities>adc cat3 comp flash_200k i2c i2s kit_xmc13_boot_001 led mcu_gp rtc spi sram_16k uart xmc xmc1000</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>XMC1302 Microcontroller in TSSOP-38 with 200KB Flash and full peripheral set of XMC1300 series</li> <li>On board Debugger for downloading and debugging of application code</li> <li>Virtual COM port for UART communication with terminal program e.g. Hyperterminal</li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>KIT_XMC13_BOOT_001 evaluation board</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/cms/en/product/evaluation-boards/kit_xmc13_boot_001/</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 ccu4 ccu8 low_power posif"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 ccu4 ccu8 low_power posif"> | |
| <num>2.2.1 release</num> | |
| <commit>release-v2.2.1</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 ccu4 ccu8 low_power posif"> | |
| <num>2.2.0 release</num> | |
| <commit>release-v2.2.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 ccu4 ccu8 posif"> | |
| <num>2.1.0 release</num> | |
| <commit>release-v2.1.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>KIT_XMC14_BOOT_001</id> | |
| <category>XMC™ BSPs</category> | |
| <board_uri>https://github.com/cypresssemiconductorco/TARGET_KIT_XMC14_BOOT_001</board_uri> | |
| <chips> | |
| <mcu>XMC1404-Q064x0200</mcu> | |
| </chips> | |
| <name>KIT_XMC14_BOOT_001</name> | |
| <summary> The XMC1400 Boot Kit (CPU-14A-V1) houses the XMC1400 Microcontroller and a 2x30 pin edge for application expansion. <p><b>Note:</b></p> <p>Programming this kit requires installing <a href="https://www.segger.com/downloads/jlink/#J-LinkSoftwareAndDocumentationPack">SEGGER J-Link software</a>.</p></summary> | |
| <prov_capabilities>adc can cat3 comp flash_200k i2c i2s kit_xmc14_boot_001 led mcu_gp rtc spi sram_16k uart xmc xmc1000</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>XMC1400 (Arm&#174; Cortex&#174;-M0 based) Microcontroller in a VQFN64 package</li> <li>On board Debugger for downloading and debugging of application code</li> <li>Virtual COM port for UART communication with terminal program e.g. Hyperterminal</li> <li>2x30 card edge connector for extension to application card e.g. Colour LED Card and White LED Card</li> <li>4 User LEDs connected to GPIO P4.0, P4.1, P4.2, P4.3</li> <li>Variable resistor R110 connected to analog input P2.5</li> <li>All the pins of XMC1400 are accessible via the connector JP101, JP103, JP104 and JP105</li> <li>CAN interface with CAN transceiver mounted</li> <li>External crystal 20 MHz and 32.768 kHz mounted</li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>KIT_XMC14_BOOT_001 evaluation board</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/cms/en/product/evaluation-boards/kit_xmc14_boot_001/</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 ccu4 ccu4_capture ccu8 low_power posif"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 ccu4 ccu4_capture ccu8 low_power posif"> | |
| <num>2.2.1 release</num> | |
| <commit>release-v2.2.1</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 ccu4 ccu4_capture ccu8 low_power posif"> | |
| <num>2.2.0 release</num> | |
| <commit>release-v2.2.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 ccu4_capture ccu8 posif"> | |
| <num>2.1.0 release</num> | |
| <commit>release-v2.1.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 ccu4_capture ccu8 posif"> | |
| <num>2.0.0 release</num> | |
| <commit>release-v2.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.3.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2 ccu4_capture ccu8 posif"> | |
| <num>Latest 1.X release</num> | |
| <commit>latest-v1.X</commit> | |
| </version> | |
| <version tools_min_version="2.3.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2 ccu4_capture ccu8 posif"> | |
| <num>1.0.0 release</num> | |
| <commit>release-v1.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.1" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2 ccu4_capture ccu8 posif"> | |
| <num>Latest 0.X release</num> | |
| <commit>latest-v0.X</commit> | |
| </version> | |
| <version tools_min_version="2.2.1" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2 ccu4_capture ccu8 posif"> | |
| <num>0.5.0 release</num> | |
| <commit>release-v0.5.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>KIT_XMC_PLT2GO_XMC4200</id> | |
| <category>XMC™ BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_KIT_XMC_PLT2GO_XMC4200</board_uri> | |
| <chips> | |
| <mcu>XMC4200-F64x256</mcu> | |
| </chips> | |
| <name>KIT_XMC_PLT2GO_XMC4200</name> | |
| <summary> Kit Platform2GO XTREME XMC4200 kit - This kit has the XMC4200 device with debugger plus CAN, Arduino, MikroBUS and Shields2Go form factor. Equipped with an Arm&#174; Cortex&#174;-M4 based XMC&#8482; Microcontroller from Infineon Technologies AG, the XMC4200 Platform2Go is designed to evaluate the capabilities of Infineon's XMC4200 Microcontroller. <p><b>Note:</b></p> <p>Programming this kit requires installing <a href="https://www.segger.com/downloads/jlink/#J-LinkSoftwareAndDocumentationPack">SEGGER J-Link software</a>.</p></summary> | |
| <prov_capabilities>adc arduino can cat3 dac dma flash_256k i2c i2s kit_xmc_plt2go_xmc4200 led mcu_gp pot rtc sdhc spi sram_40k switch usb_device usb_host xmc xmc4000</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>XMC4200 (Arm&#174; Cortex&#174;-M4 based) Microcontroller</li> <li>On-board Debug Probe with USB interface supporting SWD + SWO</li> <li>Detachable J-Link debugger and UART virtual COM port, with micro USB connector</li> <li>Virtual COM Port via Debug Probe</li> <li>Arduino Uno compatibility</li> <li>Shields2Go connectivity</li> <li>Ethernet-enabled communication option</li> <li>Additional voltage level shifters</li> <li>Available in four different assembly versions: 3.3V Shields (Lite), 5V (Lite)</li> <li>CAN connectivity</li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>KIT_XMC_PLT2GO_XMC4200 evaluation board</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/cms/en/product/evaluation-boards/kit_xmc_plt2go_xmc4200/</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 ccu4 ccu8 low_power posif uart"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 ccu4 ccu8 low_power posif uart"> | |
| <num>2.2.1 release</num> | |
| <commit>release-v2.2.1</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 ccu4 ccu8 low_power posif uart"> | |
| <num>2.2.0 release</num> | |
| <commit>release-v2.2.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 ccu4 ccu8 posif"> | |
| <num>2.1.0 release</num> | |
| <commit>release-v2.1.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>KIT_XMC43_RELAX_ECAT_V1</id> | |
| <category>XMC™ BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_KIT_XMC43_RELAX_ECAT_V1</board_uri> | |
| <chips> | |
| <mcu>XMC4300-F100x256</mcu> | |
| </chips> | |
| <name>KIT_XMC43_RELAX_ECAT_V1</name> | |
| <summary> The XMC4300 microcontroller series further reduces complexity in EtherCAT implementation and cost in factory automation, industrial motor control, I/O modules and robotics. The XMC4300 series was specifically developed for EtherCAT industrial applications, where cost pressure places a premium on design flexibility, connectivity and performance without compromise to EtherCAT communication features. <p><b>Note:</b></p> <p>Programming this kit requires installing <a href="https://www.segger.com/downloads/jlink/#J-LinkSoftwareAndDocumentationPack">SEGGER J-Link software</a>.</p></summary> | |
| <prov_capabilities>adc arduino can cat3 dac dma flash_256k i2c i2s kit_xmc43_relax_ecat_v1 led mcu_gp rtc sdhc spi sram_128k switch usb_device usb_host xmc xmc4000</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>XMC4300-F100 Microcontroller based on Arm&#174; Cortex&#174;-M4@144MHZ, integrated EtherCAT Slave Controller, 256kB Flash and 128kB RAM</li> <li>On-board Debug Probe with USB interface supporting SWD + SWO</li> <li>Detachable J-Link debugger and UART virtual COM port, with micro USB connector</li> <li>Virtual COM Port via Debug Probe</li> <li>Power over USB</li> <li>ESD and reverse current protection</li> <li>2x user button and 2x user LED</li> <li>Arduino hardware compatible 3.3V and 5V pinout</li> <li>mikroBUS hardware compatible for click boards</li> <li>CAN node with D-SUB 9 plug</li> <li>EtherCAT node with standard plug</li> <li>EtherCAT node with PHY to PHY connection (optional)</li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>KIT_XMC43_RELAX_ECAT_V1 evaluation board</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/cms/en/product/evaluation-boards/kit_xmc43_relax_ecat_v1/</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 ccu4 ccu8 ethernet low_power memory qspi uart"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 ccu4 ccu8 ethernet low_power memory qspi uart"> | |
| <num>2.2.0 release</num> | |
| <commit>release-v2.2.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 ccu4 ccu8 memory qspi"> | |
| <num>2.1.0 release</num> | |
| <commit>release-v2.1.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>KIT_XMC_PLT2GO_XMC4400</id> | |
| <category>XMC™ BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_KIT_XMC_PLT2GO_XMC4400</board_uri> | |
| <chips> | |
| <mcu>XMC4400-F100x512</mcu> | |
| </chips> | |
| <name>KIT_XMC_PLT2GO_XMC4400</name> | |
| <summary> Kit Platform2GO XTREME XMC4400 kit - This kit has the XMC4400 device with debugger plus ETHERNET, CAN, ARDUINO, MikroBUS and Shields2Go form factor. Equipped with an Arm&#174; Cortex&#174;-M4 based XMC&#8482; Microcontroller from Infineon Technologies AG, the XMC4400 Platform2Go is designed to evaluate the capabilities of Infineon's XMC4400 Microcontroller. <p><b>Note:</b></p> <p>Programming this kit requires installing <a href="https://www.segger.com/downloads/jlink/#J-LinkSoftwareAndDocumentationPack">SEGGER J-Link software</a>.</p></summary> | |
| <prov_capabilities>adc arduino can cat3 dac dma ethernet flash_512k i2c i2s kit_xmc_plt2go_xmc4400 led mcu_gp rtc sdhc spi sram_80k switch usb_device usb_host xmc xmc4000</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>XMC4400 (Arm&#174; Cortex&#174;-M4 based) Microcontroller</li> <li>On-board Debug Probe with USB interface supporting SWD + SWO</li> <li>Detachable J-Link debugger and UART virtual COM port, with micro USB connector</li> <li>Virtual COM Port via Debug Probe</li> <li>Arduino Uno compatibility</li> <li>Shields2Go connectivity</li> <li>Ethernet-enabled communication option</li> <li>Additional voltage level shifters</li> <li>Available in four different assembly versions: 3.3V Shields (Lite), 5V (Lite)</li> <li>CAN connectivity</li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>KIT_XMC_PLT2GO_XMC4400 evaluation board</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/cms/en/product/evaluation-boards/kit_xmc_plt2go_xmc4400/</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 ccu4 ccu8 low_power posif uart"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 ccu4 ccu8 low_power posif uart"> | |
| <num>2.2.1 release</num> | |
| <commit>release-v2.2.1</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 ccu4 ccu8 low_power posif uart"> | |
| <num>2.2.0 release</num> | |
| <commit>release-v2.2.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 ccu4 ccu8 posif"> | |
| <num>2.1.0 release</num> | |
| <commit>release-v2.1.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>KIT_XMC45_RELAX_V1</id> | |
| <category>XMC™ BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_KIT_XMC45_RELAX_V1</board_uri> | |
| <chips> | |
| <mcu>XMC4500-F100x1024</mcu> | |
| </chips> | |
| <name>KIT_XMC45_RELAX_V1</name> | |
| <summary> XMC4500 Microcontroller - Detachable on-board debugger - Power over USB - ESD and reverse current protection - 2 x user button and 2 x user LED - 4 x SPI-Master, 3x I2C, 3 x I2S, 3 x UART, 2 x CAN, 17 x ADC (12 bit), 2 x DAC, 31x PMW mapped on 2 Pin Headers 2 x 20 0.1" - Micro-USB plug - Ethernet PHY and RJ45 jack - Real Time Clock crystal - 32 Mbit Quad-SPI Flash - microSD card slot. <p><b>Note:</b></p> <p>Programming this kit requires installing <a href="https://www.segger.com/downloads/jlink/#J-LinkSoftwareAndDocumentationPack">SEGGER J-Link software</a>.</p></summary> | |
| <prov_capabilities>adc arduino can cat3 dac dma ethernet flash_1024k i2c i2s kit_xmc45_relax_v1 led mcu_gp rtc sdhc spi sram_160k switch usb_device usb_host xmc xmc4000</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>XMC4500 Microcontroller (Arm&#174; Cortex&#174;-M4F based)</li> <li>On-board Debug Probe with USB interface supporting SWD + SWO</li> <li>Detachable J-Link debugger and UART virtual COM port, with micro USB connector</li> <li>Virtual COM Port via Debug Probe</li> <li>Power over USB</li> <li>ESD and reverse current protection</li> <li>2x user button and 2x user LED</li> <li>4x SPI-Master, 3x I2C, 3x I2S, 3x UART, 2x CAN, 17x ADC</li> <li>(12 bit), 2x DAC, 31x PWM mapped on 2 Pin Headers 2x 20 0.1"</li> <li>Micro-USB plug</li> <li>Ethernet PHY and RJ45 Jack</li> <li>Real Time Clock crystal</li> <li>32 Mbit Quad-SPI Flash</li> <li>microSD card slot</li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>KIT_XMC45_RELAX_V1 evaluation board</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/cms/en/product/evaluation-boards/kit_xmc45_relax_v1/</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 ccu4 ccu8 low_power memory posif qspi uart"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 ccu4 ccu8 low_power memory posif qspi uart"> | |
| <num>2.2.1 release</num> | |
| <commit>release-v2.2.1</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 ccu4 ccu8 low_power memory posif qspi uart"> | |
| <num>2.2.0 release</num> | |
| <commit>release-v2.2.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 ccu4 ccu8 memory posif qspi"> | |
| <num>2.1.0 release</num> | |
| <commit>release-v2.1.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>KIT_XMC47_RELAX_V1</id> | |
| <category>XMC™ BSPs</category> | |
| <board_uri>https://github.com/cypresssemiconductorco/TARGET_KIT_XMC47_RELAX_V1</board_uri> | |
| <chips> | |
| <mcu>XMC4700-F144x2048</mcu> | |
| </chips> | |
| <name>KIT_XMC47_RELAX_V1</name> | |
| <summary> The XMC4700 Relax Kit is an XMC4700 based microcontroller evaluation kit with Ethernet connection, CAN node and microSD Card slot included. It is hardware compatible with 3.3V Arduino Shields. <p><b>Note:</b></p> <p>Programming this kit requires installing <a href="https://www.segger.com/downloads/jlink/#J-LinkSoftwareAndDocumentationPack">SEGGER J-Link software</a>.</p></summary> | |
| <prov_capabilities>adc arduino can cat3 dac dma ethernet flash_2048k i2c i2s kit_xmc47_relax_v1 led mcu_gp rtc sdhc spi sram_352k switch usb_device usb_host xmc xmc4000</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>XMC4700 (Arm&#174; Cortex&#174;-M4 based) Microcontroller in a LQFP144 package</li> <li>On-board Debug Probe with USB interface supporting SWD + SWO</li> <li>Detachable J-Link debugger and UART virtual COM port, with micro USB connector</li> <li>Virtual COM Port via Debug Probe</li> <li>2 x User Push-Buttons and 2 x User LED and 1 x Reset Push-Button</li> <li>Voltage Regulator 5 V -&gt; 3.3 V</li> <li>USB (Micro USB Plug)</li> <li>12 MHz Crystal</li> <li>32.768 kHz RTC Crystal</li> <li>0 Ohm Bridges for 3.3 V Arduino shields</li> <li>Ethernet PHY and RJ45 Jack</li> <li>32 Mbit Quad-SPI Flash Memory</li> <li>microSD Card Slot</li> <li>CAN Transceiver</li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>KIT_XMC47_RELAX_V1 evaluation board</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/cms/en/product/evaluation-boards/kit_xmc47_relax_v1/</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 ccu4 ccu4_capture ccu8 low_power memory posif qspi uart"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 ccu4 ccu4_capture ccu8 low_power memory posif qspi uart"> | |
| <num>2.2.0 release</num> | |
| <commit>release-v2.2.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 ccu4 ccu4_capture ccu8 memory posif qspi"> | |
| <num>2.1.0 release</num> | |
| <commit>release-v2.1.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 ccu4 ccu4_capture ccu8 memory posif qspi"> | |
| <num>2.0.0 release</num> | |
| <commit>release-v2.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.3.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2 ccu4_capture ccu8 memory posif qspi"> | |
| <num>Latest 1.X release</num> | |
| <commit>latest-v1.X</commit> | |
| </version> | |
| <version tools_min_version="2.3.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2 ccu4_capture ccu8 memory posif qspi"> | |
| <num>1.0.0 release</num> | |
| <commit>release-v1.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.2.1" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2 ccu4_capture ccu8 memory posif qspi"> | |
| <num>Latest 0.X release</num> | |
| <commit>latest-v0.X</commit> | |
| </version> | |
| <version tools_min_version="2.2.1" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2 ccu4_capture ccu8 memory posif qspi"> | |
| <num>0.5.0 release</num> | |
| <commit>release-v0.5.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>KIT_XMC48_RELAX_ECAT_V1</id> | |
| <category>XMC™ BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_KIT_XMC48_RELAX_ECAT_V1</board_uri> | |
| <chips> | |
| <mcu>XMC4800-F144x2048</mcu> | |
| </chips> | |
| <name>KIT_XMC48_RELAX_ECAT_V1</name> | |
| <summary> The XMC4800 Microcontroller evaluation kit; EtherCAT node; Ethernet connection; CAN node and microSD Card slot included; Hardware compatible with compatible with 3.3V Arduino Shields. <p><b>Note:</b></p> <p>Programming this kit requires installing <a href="https://www.segger.com/downloads/jlink/#J-LinkSoftwareAndDocumentationPack">SEGGER J-Link software</a>.</p></summary> | |
| <prov_capabilities>adc arduino can cat3 dac dma ethernet flash_2048k i2c i2s kit_xmc48_relax_ecat_v1 led mcu_gp rtc sdhc spi sram_352k switch usb_device usb_host xmc xmc4000</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>XMC4800-F144 Microcontroller based on Arm&#174; Cortex&#174;-M4 @144MHz, integrated EtherCAT Slave Controller, 2MB Flash and 352KB RAM</li> <li>On-board Debug Probe with USB interface supporting SWD + SWO</li> <li>Detachable J-Link debugger and UART virtual COM port, with micro USB connector</li> <li>Virtual COM Port via Debug Probe</li> <li>Power over USB</li> <li>ESD and reverse current protection</li> <li>2 x user button and 2 x user LED</li> <li>Arduino hardware compatible 3.3V pinout</li> <li>Real Time Clock crystal</li> <li>Quad SPI Flash</li> <li>microSD Card Slot</li> <li>Ethernet PHY and RJ45 Jack</li> <li>CAN node</li> <li>EtherCAT node</li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>KIT_XMC48_RELAX_ECAT_V1 evaluation board</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/cms/en/product/evaluation-boards/kit_xmc48_relax_ecat_v1/</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 ccu4 ccu4_capture ccu8 low_power memory posif qspi uart"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 ccu4 ccu4_capture ccu8 low_power memory posif qspi uart"> | |
| <num>2.2.0 release</num> | |
| <commit>release-v2.2.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 ccu4_capture ccu8 memory posif qspi"> | |
| <num>2.1.0 release</num> | |
| <commit>release-v2.1.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>WLC1115-68LQXQ</id> | |
| <category>Wireless Charging BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_WLC1115-68LQXQ</board_uri> | |
| <chips> | |
| <mcu>WLC1115-68LQXQ</mcu> | |
| </chips> | |
| <name>WLC1115-68LQXQ</name> | |
| <summary>BSP for WLC1 15W Solution</summary> | |
| <prov_capabilities>j2 led mcu_gp usbpd</prov_capabilities> | |
| <description>The solution board is Qi v1.3.2 compliant Extended Power Profile transmitter.</description> | |
| <documentation_url>https://www.infineon.com/cms/en/product/evaluation-boards/refwlctx15wc1</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 cat2 flash_128k hal i2c low_power spi sram_16k uart wlc1 wlc1115_68lqxq"> | |
| <num>Latest 3.X release</num> | |
| <commit>latest-v3.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 cat2 flash_128k hal i2c low_power spi sram_16k uart wlc1 wlc1115_68lqxq"> | |
| <num>3.1.0 release</num> | |
| <commit>release-v3.1.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 cat2"> | |
| <num>3.0.0 release</num> | |
| <commit>release-v3.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3 psoc4 wlc1"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="2.4.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen3 psoc4 wlc1"> | |
| <num>2.0.0 release</num> | |
| <commit>release-v2.0.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>XMC-GENERIC</id> | |
| <category>XMC™ BSPs</category> | |
| <board_uri>https://github.com/cypresssemiconductorco/TARGET_XMC-GENERIC</board_uri> | |
| <chips> | |
| <mcu>XMC1404-Q064x0200</mcu> | |
| </chips> | |
| <name>XMC-GENERIC</name> | |
| <summary>This board support package is intended for creating custom XMC™ BSPs.</summary> | |
| <prov_capabilities>cat3 mcu_gp xmc</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>This is a generic template, there is no corresponding physical board and hence no board-specific macros. The user is expected to create a custom BSP with various pin/hardware details - Refer to KBA230822. Code examples using kit/board resources will not be shown for this BSP until the manifest data for the BSP is updated to include additional capabilities. Refer to ModusToolbox&#8482; user guide for creating custom manifests.</li> <li>This is manifest can also be used to allow the board to show up in the ModusToolbox&#8482; tools</li> </ul><p/> <div class="category">Kit Contents:</div><ul> </ul></description> | |
| <documentation_url>https://github.com/Infineon/TARGET_XMC-GENERIC</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 xmc_generic"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 xmc_generic"> | |
| <num>2.2.0 release</num> | |
| <commit>release-v2.2.0</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>2.0.0 release</num> | |
| <commit>release-v2.0.0</commit> | |
| </version> | |
| <version tools_min_version="2.3.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>Latest 1.X release</num> | |
| <commit>latest-v1.X</commit> | |
| </version> | |
| <version tools_min_version="2.3.0" flow_version="1.0,2.0" prov_capabilities_per_version="bsp_gen2"> | |
| <num>1.0.0 release</num> | |
| <commit>release-v1.0.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>WLC1150-68LQXQ</id> | |
| <category>Wireless Charging BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_WLC1150-68LQXQ</board_uri> | |
| <chips> | |
| <mcu>WLC1150-68LQXQ</mcu> | |
| </chips> | |
| <name>WLC1150-68LQXQ</name> | |
| <summary>BSP for WLC1 50W Solution</summary> | |
| <prov_capabilities>j2 led mcu_gp usbpd</prov_capabilities> | |
| <description>The solution board is Qi v1.3.2 compliant Extended Power Profile transmitter.</description> | |
| <documentation_url>https://www.infineon.com/cms/en/product/evaluation-boards/ref_wlc_tx50w_n1</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 cat2 wlc1 wlc1150_68lqxq"> | |
| <num>Latest 3.X release</num> | |
| <commit>latest-v3.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 cat2 wlc1 wlc1150_68lqxq"> | |
| <num>3.1.0 release</num> | |
| <commit>release-v3.1.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>EVAL_6EDL7141_TRAP_1SH</id> | |
| <category>XMC™ BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_EVAL_6EDL7141_TRAP_1SH</board_uri> | |
| <chips> | |
| <mcu>XMC1404-Q064x0200</mcu> | |
| </chips> | |
| <name>EVAL_6EDL7141_TRAP_1SH</name> | |
| <summary> The EVAL_6EDL7141_TRAP_1SH houses the 6EDL7141 three-phase smart motor driver IC with on board debugger. <p><b>Note:</b></p> <p>Programming this kit requires installing <a href="https://www.segger.com/downloads/jlink/#J-LinkSoftwareAndDocumentationPack">SEGGER J-Link software</a>.</p></summary> | |
| <prov_capabilities>adc bsp_gen4 can cat3 ccu4 comp eval_6edl7141_trap_1sh flash_200k i2c i2s led mcu_gp rtc spi sram_16k uart xmc xmc1000</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>6EDL7141 three-phase smart motor driver IC</li> <li>XMC1404 (Arm&#174; Cortex&#174;-M0 based) Microcontroller in a VQFN64 package</li> <li>BSC007N04LS6 OptiMOS&#8482; 6 40V 0.7m&#937; 5x6PQFN</li> <li>On board Debugger for downloading and debugging of application code</li> <li>Two used LEDs connected to GPIO P4.7, P4.8</li> <li>Speed POT to set speed reference of motor connected to analog input P2.5</li> <li>8-pin XMC&#8482; MCU Debug Connector to external debugger</li> <li>5-pin HALL connector inputs for motor position feedback connected to GPIO P4.1, P4.2, P4.3</li> <li>On board temperature sensor connected to analog input P2.4</li> <li>Trinamic QBL4208-61-04-013 BLDC motor with three Hall sensors(Depending on ordering option)</li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>EVAL_6EDL7141_TRAP_1SH 18V brushless DC motor drive board</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/cms/en/product/evaluation-boards/eval_6edl7141_trap_1sh/</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>Latest 0.X release</num> | |
| <commit>latest-v0.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>0.5.0 release</num> | |
| <commit>release-v0.5.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>EVAL_6EDL7141_FOC_3SH</id> | |
| <category>XMC™ BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_EVAL_6EDL7141_FOC_3SH</board_uri> | |
| <chips> | |
| <mcu>XMC1404-Q064x0200</mcu> | |
| </chips> | |
| <name>EVAL_6EDL7141_FOC_3SH</name> | |
| <summary> The EVAL_6EDL7141_FOC_3SH houses the 6EDL7141 three-phase smart motor driver IC with on board debugger <p><b>Note:</b></p> <p>Programming this kit requires installing <a href="https://www.segger.com/downloads/jlink/#J-LinkSoftwareAndDocumentationPack">SEGGER J-Link software</a>.</p></summary> | |
| <prov_capabilities>adc bsp_gen4 can cat3 ccu4 comp eval_6edl7141_foc_3sh flash_200k i2c i2s led mcu_gp rtc spi sram_16k uart xmc xmc1000</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>6EDL7141 three-phase smart motor driver IC</li> <li>XMC1404 (Arm&#174; Cortex&#174;-M0 based) Microcontroller in a VQFN64 package</li> <li>ST011N06NM5 OptiMOS&#8482; 6 60V 1.1m&#937; sTOLL package</li> <li>On board Debugger for downloading and debugging of application code</li> <li>Two used LEDs connected to GPIO P4.7, P4.8</li> <li>Speed POT to set speed reference of motor connected to analog input P2.5</li> <li>8-pin XMC&#8482; MCU Debug Connector to external debugger</li> <li>5-pin HALL connector inputs for motor position feedback connected to GPIO P4.1, P4.2, P4.3</li> <li>On board temperature sensor connected to analog input P2.4</li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>EVAL_6EDL7141_FOC_3SH evaluation board</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/cms/en/product/evaluation-boards/eval_6edl7141_foc_3sh/</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>Latest 0.X release</num> | |
| <commit>latest-v0.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>0.5.0 release</num> | |
| <commit>release-v0.5.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>EVAL_IMD700A_FOC_3SH</id> | |
| <category>XMC™ BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_EVAL_IMD700A_FOC_3SH</board_uri> | |
| <chips> | |
| <mcu>IMD701A-Q064x128 (XMC1404-Q064x0128)</mcu> | |
| </chips> | |
| <name>EVAL_IMD700A_FOC_3SH</name> | |
| <summary> The EVAL_IMD700A_FOC_3SH houses the IMD701A-Q064x128 three-phase smart motor driver IC with on board debugger. <p><b>Note:</b></p> <p>Programming this kit requires installing <a href="https://www.segger.com/downloads/jlink/#J-LinkSoftwareAndDocumentationPack">SEGGER J-Link software</a>.</p></summary> | |
| <prov_capabilities>adc bsp_gen4 cat3 ccu4 eval_imd700a_foc_3sh flash_128k led mcu_gp sram_16k uart xmc xmc1000</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>IMD701A three-phase smart motor driver IC with integrated XMC1404 (Arm&#174; Cortex&#174;-M0 based) Microcontroller</li> <li>IQE013N04LM6 (OptiMOS&#8482; 6 40 V/1.5 m&#937; 3x3 corner gate, source down)</li> <li>On board Debugger for downloading and debugging of application code</li> <li>Two user LEDs connected to GPIO P4.7, P4.8</li> <li>Speed POT to set speed reference of motor connected to analog input P2.5</li> <li>8-pin XMC&#8482; MCU Debug Connector to external debugger</li> <li>5-pin HALL connector inputs for motor position feedback connected to GPIO P4.1, P4.2, P4.3</li> <li>On board temperature sensor connected to analog input P2.4</li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>EVAL_IMD700A_FOC_3SH evaluation board</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/cms/en/product/evaluation-boards/eval_imd700a_foc_3sh/</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>Latest 0.X release</num> | |
| <commit>latest-v0.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>0.5.0 release</num> | |
| <commit>release-v0.5.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>KIT_XMC71_EVK_LITE_V1</id> | |
| <category>XMC™ BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_KIT_XMC71_EVK_LITE_V1</board_uri> | |
| <chips> | |
| <mcu>XMC7100D-F176K4160</mcu> | |
| </chips> | |
| <name>KIT_XMC71_EVK_LITE_V1</name> | |
| <summary>The KIT_XMC71_EVK_LITE_V1, a 176-pin evaluation board is based on the XMC7100 family of devices. XMC7100 MCU is designed for industrial applications. The evaluation board carries a XMC7100D microcontroller, and headers compatible with Arduino for interfacing Arduino shields. In addition, the board features an on-board programmer/debugger (KitProg3), a 512-Mbit QSPI NOR flash, CAN FD transceiver, Ethernet PHY transceiver with RJ45 connector interface, a Shield2Go connector interface and MikroBUS connector interface, two user LEDs, one potentiometer, and two push buttons. The board supports operating voltages from 3.3 V to 5.0 V for XMC7100D device.</summary> | |
| <prov_capabilities>adc arduino can cat1 cat1c dma ethernet flash_4160k hal i2c i2s kit_xmc71_evk_lite_v1 led low_power lptimer mcu_gp memory memory_qspi multi_core nor_flash qspi rtc sdhc smart_io spi sram_768k std_crypto switch uart xmc7000</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>XMC7100D-F176K4160 8MB Flash 176-pin TEQFP device</li> <li>Programming interface (Arm&#174; Standard JTAG, Cortex&#174; Debug + ETM with Arm&#174; ETM Mictor)</li> <li>Reset control with manual reset switch and voltage supervision</li> <li>CAN FD interface</li> <li>Ethernet interface</li> <li>One 512-Mbit external Quad SPI NOR Flash that provides a fast, expandable memory for data and code</li> <li>KitProg3 on-board SWD programmer/debugger, USB-UART and USB-I2C bridge functionality</li> <li>A Shield2Go connector interface and a MikroBUS connector interface</li> <li>Selectable input supply voltages of 3.3 V and 5.0 V for the XMC7100D device</li> <li>Two user LEDs, two user buttons, and a reset button for the XMC7100D device</li> <li>A potentiometer which can be used to simulate analog sensor output</li> <li>A mode button and a mode LED for KitProg3</li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>XMC7100 evaluation board</li> <li>USB Type-A to Micro-B cable</li> <li>Quick start guide (printed on the kit package)</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/KIT_XMC71_EVK_LITE_V1</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.1.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen5"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="3.1.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen5"> | |
| <num>2.1.0 release</num> | |
| <commit>release-v2.1.0</commit> | |
| </version> | |
| <version tools_min_version="3.1.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen5"> | |
| <num>2.0.2 release</num> | |
| <commit>release-v2.0.2</commit> | |
| </version> | |
| <version tools_min_version="3.1.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen5"> | |
| <num>2.0.1 release</num> | |
| <commit>release-v2.0.1</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>KIT_XMC71_EVK_LITE_V2</id> | |
| <category>XMC™ BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_KIT_XMC71_EVK_LITE_V2</board_uri> | |
| <chips> | |
| <mcu>XMC7100D-F100K4160</mcu> | |
| </chips> | |
| <name>KIT_XMC71_EVK_LITE_V2</name> | |
| <summary>The KIT_XMC71_EVK_LITE_V2, a 100-pin evaluation board is based on the XMC7100 family of devices. XMC7100 MCU is designed for industrial applications. The evaluation board carries a XMC7100D microcontroller, and headers compatible with Arduino for interfacing Arduino shields. In addition, the board features an on-board programmer/debugger (KitProg3), a 512-Mbit QSPI NOR flash, CAN FD transceiver, Ethernet PHY transceiver with RJ45 connector interface, a Shield2Go connector interface and MikroBUS connector interface, two user LEDs, one potentiometer, and two push buttons. The board supports operating voltages from 3.3 V to 5.0 V for XMC7100D device.<br> <p><b>Note:</b></p> <p>KIT_XMC71_EVK_LITE_V2 is the board support package for the XMC7100 Lite Evaluation board with XMC7100D-F100K4160 MCU. Replace the XMC7100D-F176K4160 (default device) on the XMC7100 Lite Evaluation board with XMC7100D-F100K4160 to use this BSP.</p></summary> | |
| <prov_capabilities>adc arduino can cat1 cat1c dma ethernet flash_4160k hal i2c i2s kit_xmc71_evk_lite_v2 led low_power lptimer mcu_gp memory memory_qspi multi_core nor_flash qspi rtc sdhc smart_io spi sram_768k std_crypto switch uart xmc7000</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>XMC7100D-F100K4160 8MB Flash 100-pin TEQFP device</li> <li>Programming interface (Arm&#174; Standard JTAG, Cortex&#174; Debug + ETM with Arm&#174; ETM Mictor)</li> <li>Reset control with manual reset switch and voltage supervision</li> <li>CAN FD interface</li> <li>Ethernet interface</li> <li>One 512-Mbit external Quad SPI NOR Flash that provides a fast, expandable memory for data and code</li> <li>KitProg3 on-board SWD programmer/debugger, USB-UART and USB-I2C bridge functionality</li> <li>A Shield2Go connector interface and a MikroBUS connector interface</li> <li>Selectable input supply voltages of 3.3 V and 5.0 V for the XMC7100D device</li> <li>Two user LEDs, two user buttons, and a reset button for the XMC7100D device</li> <li>A potentiometer which can be used to simulate analog sensor output</li> <li>A mode button and a mode LED for KitProg3</li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>XMC7100 evaluation board</li> <li>USB Type-A to Micro-B cable</li> <li>Quick start guide (printed on the kit package)</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/KIT_XMC71_EVK_LITE_V1</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.1.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen5"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="3.1.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen5"> | |
| <num>2.1.0 release</num> | |
| <commit>release-v2.1.0</commit> | |
| </version> | |
| <version tools_min_version="3.1.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen5"> | |
| <num>2.0.2 release</num> | |
| <commit>release-v2.0.2</commit> | |
| </version> | |
| <version tools_min_version="3.1.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen5"> | |
| <num>2.0.1 release</num> | |
| <commit>release-v2.0.1</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>KIT_XMC1300_DC_V1</id> | |
| <category>XMC™ BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_KIT_XMC1300_DC_V1</board_uri> | |
| <chips> | |
| <mcu>XMC1302-T038x0200</mcu> | |
| </chips> | |
| <name>KIT_XMC1300_DC_V1</name> | |
| <summary> The XMC1300 Drive Card houses the XMC1302 Microcontroller, a power board connector, a set of position interface circuits with hall and encoder connectors, a USIC interface and an isolated on-board debug interface. The board along with a three phase inverter demonstrates the capabilities of the XMC1302. The main use case for this board is to demonstrate the motor control features of XMC1302 device including tool chain. The focus is safe operation under evaluation conditions. The board is neither cost nor size optimized and does not serve as a reference design. <p><b>Note:</b></p> <p>Programming this kit requires installing <a href="https://www.segger.com/downloads/jlink/#J-LinkSoftwareAndDocumentationPack">SEGGER J-Link software</a>.</p></summary> | |
| <prov_capabilities>adc ccu4 ccu8 comp flash_200k i2c i2s xmc led kit_xmc1300_dc_v1 posif rtc spi sram_16k uart xmcdc xmc1000 low_power</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>XMC1302 Microcontroller in TSSOP-38 with 200KB Flash and full peripheral set of XMC1300 series</li> <li>On-board Debugger for downloading and debugging of application code</li> <li>Virtual COM port for UART communication with terminal program e.g. Hyperterminal</li> <div class="category">Kit Contents:</div><ul> <li>KIT_XMC1300_DC_V1 drive card</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/cms/en/product/evaluation-boards/kit_xmc1300_dc_v1/</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>2.3.0 release</num> | |
| <commit>release-v2.3.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>KIT_XMC1400_DC_V1</id> | |
| <category>XMC™ BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_KIT_XMC1400_DC_V1</board_uri> | |
| <chips> | |
| <mcu>XMC1402-T038x0200</mcu> | |
| </chips> | |
| <name>KIT_XMC1400_DC_V1</name> | |
| <summary> The XMC1400 Drive Card houses the XMC1402 Microcontroller, a power board connector, a set of position interface circuits with hall and encoder connectors, a USIC interface and an isolated on-board debug interface. The board along with a three phase inverter demonstrates the capabilities of the XMC1402. The main use case for this board is to demonstrate the motor control features of XMC1402 device including tool chain. The focus is safe operation under evaluation conditions. The board is neither cost nor size optimized and does not serve as a reference design. <p><b>Note:</b></p> <p>Programming this kit requires installing <a href="https://www.segger.com/downloads/jlink/#J-LinkSoftwareAndDocumentationPack">SEGGER J-Link software</a>.</p></summary> | |
| <prov_capabilities>adc ccu4 ccu8 comp flash_200k i2c i2s xmc led kit_xmc1400_dc_v1 posif rtc spi sram_16k uart xmcdc xmc1000 low_power</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>XMC1402 Microcontroller in TSSOP-38 with 200KB Flash and full peripheral set of XMC1400 series</li> <li>On-board Debugger for downloading and debugging of application code</li> <li>Virtual COM port for UART communication with terminal program e.g. Hyperterminal</li> <div class="category">Kit Contents:</div><ul> <li>KIT_XMC1400_DC_V1 drive card</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/cms/en/product/evaluation-boards/kit_xmc1400_dc_v1/</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>2.3.0 release</num> | |
| <commit>release-v2.3.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>EVAL-XMC4800PSOC6M5-PSOC6</id> | |
| <category>PSoC™ 6 BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_EVAL-XMC4800PSOC6M5-PSOC6</board_uri> | |
| <chips> | |
| <mcu>CY8C624ABZI-S2D44</mcu> | |
| <radio>LBEE59B1LV (CYW43012C0WKWBG)</radio> | |
| </chips> | |
| <name>EVAL-XMC4800PSOC6M5-PSOC6</name> | |
| <summary>The EVAL-XMC4800PSOC6M5 is a controller board which fits to modular application design kits (MADK) with M5 connectors. It enables easy evaluation of the supported MADKs and can be used for designing own software extensions. It comes with XMC4800 for inverter & motor control and PSoC&#8482; 6 for Web-based system configuration incl. Wi-Fi connectivity, on-board debugger and programmer for both MCUs, power supply, OPTIGA&#8482; TrustM security solution, Quad-SPI NOR flash and interfaces to connect encoder/resolver and EtherCAT complete the board.</summary> | |
| <prov_capabilities>adc bsp_gen4 bt cat1 cat1a cyw43012 cyw43xxx dma flash_2048k hal led low_power lptimer mcu_gp memory memory_qspi multi_core nor_flash optiga_trust_m psoc6 qspi rgb_led rtc smart_io spi std_crypto uart wifi</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div> <ul> <li>XMC4800 for inverter & motor control</li> <li>PSoC62+Murata 1LV Module incl. Wi-Fi connectivity and configuration GUI </li> <li>Interface to MADKs with M5 connector</li> <li>ModusToolBox&#8482; enabled</li> <li>USB on-board debugger/programmer for both MCUs</li> <li>Add-on connectors for extension on EtherCAT and external encoder/resolver circuitries</li> <li>On-board 24V / 15W flyback DC/DC</li> <li>On-board OPTIGA&#8482; TrustM security solution</li> <li>Isolated CAN interface</li> </ul><p/> <div class="category">Kit Contents:</div> <ul> <li>EVAL-XMC4800PSOC6M5 board</li> <li>USB cable</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/eval-xmc4800psoc6m5</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>Latest 4.X release</num> | |
| <commit>latest-v4.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>4.3.0 release</num> | |
| <commit>release-v4.3.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>EVAL-XMC4800PSOC6M5-XMC</id> | |
| <category>XMC™ BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_EVAL-XMC4800PSOC6M5-XMC</board_uri> | |
| <chips> | |
| <mcu>XMC4800-E196x2048</mcu> | |
| </chips> | |
| <name>EVAL-XMC4800PSOC6M5-XMC</name> | |
| <summary>The EVAL-XMC4800PSOC6M5 is a controller board which fits to modular application design kits (MADK) with M5 connectors. It enables easy evaluation of the supported MADKs and can be used for designing own software extensions. It comes with XMC4800 for inverter & motor control and PSoC&#8482; 6 for Web-based system configuration incl. Wi-Fi connectivity, on-board debugger and programmer for both MCUs, power supply, OPTIGA&#8482; TrustM security solution, Quad-SPI NOR flash and interfaces to connect encoder/resolver and EtherCAT complete the board.</summary> | |
| <prov_capabilities>adc bsp_gen4 can cat3 ccu4 ccu8 dac dma eval_xmc4800psoc6m5_xmc flash_2048k i2c led low_power mcu_gp posif rgb_led rtc spi sram_352k uart xmc xmc4000</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div> <ul> <li>XMC4800 for inverter & motor control</li> <li>PSoC62+Murata 1LV Module incl. Wi-Fi connectivity and configuration GUI </li> <li>Interface to MADKs with M5 connector</li> <li>ModusToolBox&#8482; enabled</li> <li>USB on-board debugger/programmer for both MCUs</li> <li>Add-on connectors for extension on EtherCAT and external encoder/resolver circuitries</li> <li>On-board 24V / 15W flyback DC/DC</li> <li>On-board OPTIGA&#8482; TrustM security solution</li> <li>Isolated CAN interface</li> </ul><p/> <div class="category">Kit Contents:</div> <ul> <li>EVAL-XMC4800PSOC6M5 board</li> <li>USB cable</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/eval-xmc4800psoc6m5</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version=""> | |
| <num>2.3.0 release</num> | |
| <commit>release-v2.3.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>KIT_XMC4400_DC_V1</id> | |
| <category>XMC™ BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_KIT_XMC4400_DC_V1</board_uri> | |
| <chips> | |
| <mcu>XMC4400-F100x512</mcu> | |
| </chips> | |
| <name>KIT_XMC4400_DC_V1</name> | |
| <summary> The XMC4400 Drive Card houses the XMC4400 Microcontroller, a power board connector, two sets of position interface circuits with hall and encoder connectors, a multi feedback interface and an isolated on-board debug interface with CAN capability. The board along with a three phase inverter demonstrates the capabilities of the XMC4400. The main use case for this board is to demonstrate the motor control features of XMC4400 device including tool chain. The focus is safe operation under evaluation conditions. The board is neither cost nor size optimized and does not serve as a reference design. <p><b>Note:</b></p> <p>Programming this kit requires installing <a href="https://www.segger.com/downloads/jlink/#J-LinkSoftwareAndDocumentationPack">SEGGER J-Link software</a>.</p></summary> | |
| <prov_capabilities>adc can ccu4 ccu8 dac dma flash_512k i2c i2s kit_xmc4400_dc_v1 low_power posif rtc spi sram_80k uart xmc xmc4000</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>XMC4400 Microcontroller in LQFP-100 with 512KB Flash and full peripheral set of XMC4400 series</li> <li>On-board Debugger for downloading and debugging of application code</li> <li>Virtual COM port for UART communication with terminal program e.g. Hyperterminal</li> <div class="category">Kit Contents:</div><ul> <li>KIT_XMC4400_DC_V1 drive card</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/cms/en/product/evaluation-boards/kit_xmc4400_dc_v1/</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4"> | |
| <num>2.3.0 release</num> | |
| <commit>release-v2.3.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>KIT_XMC42_DPCC_V1</id> | |
| <category>XMC™ BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_KIT_XMC42_DPCC_V1</board_uri> | |
| <chips> | |
| <mcu>XMC4200-F64x256</mcu> | |
| </chips> | |
| <name>KIT_XMC42_DPCC_V1</name> | |
| <summary> XMC4200 Digital Power Control Card - This kit has the XMC4200 device with debugger plus connector to the XMC Digital Power Explorer Board. Equipped with an ARM&#174; Cortex&#174;-M4 based XMC&#8482; Microcontroller from Infineon Technologies AG, the XMC4200 Digital Power Control Card is designed to evaluate the capabilities of Infineon's XMC4200 Microcontroller for power stage control applications. <p><b>Note:</b></p> <p>Programming this kit requires installing <a href="https://www.segger.com/downloads/jlink/#J-LinkSoftwareAndDocumentationPack">SEGGER J-Link software</a>.</p></summary> | |
| <prov_capabilities>buck_converter adc cat3 ccu8 dac dma flash_256k i2c kit_xmc42_dpcc_v1 low_power mcu_gp rtc sram_40k uart xmc xmc4000</prov_capabilities> | |
| <description> <div class="category">Kit Features:</div><ul> <li>XMC4200 (ARM&#174; Cortex&#174;-M4 based) Microcontroller</li> <li>On-board Debug Probe with USB interface supporting SWD</li> <li>Detachable J-Link debugger and UART virtual COM port, with micro USB connector</li> <li>Virtual COM Port via Debug Probe</li> <div class="category">Kit Contents:</div><ul> <li>KIT_XMC42_DPCC_V1 evaluation board</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/cms/en/product/microcontroller/32-bit-industrial-microcontroller-based-on-arm-cortex-m/</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 buck_converter"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 buck_converter"> | |
| <num>2.3.0 release</num> | |
| <commit>release-v2.3.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| <board default_location="local"> | |
| <id>KIT_XMC13_DPCC_V1</id> | |
| <category>XMC™ BSPs</category> | |
| <board_uri>https://github.com/Infineon/TARGET_KIT_XMC13_DPCC_V1</board_uri> | |
| <chips> | |
| <mcu>XMC1302-T038x0200</mcu> | |
| </chips> | |
| <name>KIT_XMC13_DPCC_V1</name> | |
| <summary> The XMC1300 Digital Power Control card board (CPU-13 A-V1) houses the XMC1300 Microcontroller and a 2x30 pin edge for digital power conversion application. The board along with XMC digital power expansion board demonstrates the capabilities for the power digital power conversion applications. <p><b>Note:</b></p> <p>Programming this kit requires installing <a href="https://www.segger.com/downloads/jlink/#J-LinkSoftwareAndDocumentationPack">SEGGER J-Link software</a>.</p></summary> | |
| <prov_capabilities>buck_converter adc cat3 ccu4 ccu8 comp flash_200k i2c i2s kit_xmc13_dpcc_v1 low_power mcu_gp rtc sram_16k uart xmc xmc1000</prov_capabilities> | |
| <description> <div class="category";>Kit Features:</div><ul> <li>XMC1302 Microcontroller in TSSOP-38 with 200KB Flash and full peripheral set of XMC1300 series</li> <li>On board Debugger for downloading and debugging of application code</li> <li>Virtual COM port for UART communication with terminal program e.g. Hyperterminal</li> </ul><p/> <div class="category">Kit Contents:</div><ul> <li>KIT_XMC13_DPCC_V1 evaluation board</li> </ul></description> | |
| <documentation_url>https://www.infineon.com/cms/en/product/microcontroller/32-bit-industrial-microcontroller-based-on-arm-cortex-m/</documentation_url> | |
| <versions> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 buck_converter"> | |
| <num>Latest 2.X release</num> | |
| <commit>latest-v2.X</commit> | |
| </version> | |
| <version tools_min_version="3.0.0" flow_version="2.0" prov_capabilities_per_version="bsp_gen4 buck_converter"> | |
| <num>2.3.0 release</num> | |
| <commit>release-v2.3.0</commit> | |
| </version> | |
| </versions> | |
| </board> | |
| </boards> |