cy_ota_config.h

/*
 * Copyright 2024, Cypress Semiconductor Corporation (an Infineon company)
 * SPDX-License-Identifier: Apache-2.0
 * 
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 * 
 *     http://www.apache.org/licenses/LICENSE-2.0
 * 
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

/**
 * Cypress OTA API abstracts underlying network and
 * platform support for Over The Air updates.
 */
 /**
 * \addtogroup group_cy_ota Infineon Over The Air (OTA) API
 * \{
 * \defgroup group_ota_config OTA User Configurations
 */
/**
 *  Customer defines for the OTA library
 *
 **********************************************************************/

#ifndef CY_OTA_CONFIG_H__
#define CY_OTA_CONFIG_H__ 1

#ifdef __cplusplus
extern "C" {
#endif

/**
 * \addtogroup group_ota_config
 * \{
 */
/**
 * @brief Initial time for checking for OTA updates.
 *
 * This is used to start the timer for the initial OTA update check after calling cy_ota_agent_start().
 */
#define CY_OTA_INITIAL_CHECK_SECS           (10)            /* 10 seconds. */

/**
 * @brief Next time for checking for OTA updates.
 *
 * This is used to restart the timer after an OTA update check in the OTA Agent.
 */
#define CY_OTA_NEXT_CHECK_INTERVAL_SECS     (24 * 60 * 60)  /* 1 day between checks. */

/**
 * @brief Retry time which checking for OTA updates.
 *
 * This is used to restart the timer after failing to contact the server during an OTA update check.
 */
#define CY_OTA_RETRY_INTERVAL_SECS          (5)             /* 5 seconds between retries after an error. */

/**
 * @brief Length of time to check for downloads.
 *
 * The OTA Agent wakes up, connects to server, and waits this much time before disconnecting.
 * This allows the OTA Agent to be inactive for long periods of time, only checking for short periods.
 * Use 0x00 to continue checking once started.
 */
#define CY_OTA_CHECK_TIME_SECS              (10 * 60)       /* 10 minutes. */

/**
 * @brief Expected maximum download time between each OTA packet arrival.
 *
 * This is used to verify that the download occurs in a reasonable time frame.
 * Set to 0 to disable this check.
 */
#define CY_OTA_PACKET_INTERVAL_SECS         (0)             /* Default disabled. */

/**
 * @brief Length of time to check for getting Job document.
 *
 * The OTA Agent wakes up, connects to broker/server, and waits this much time before disconnecting.
 * This allows the OTA Agent to be inactive for long periods of time, only checking for short periods.
 * Use 0x00 to continue checking once started.
 */
#define CY_OTA_JOB_CHECK_TIME_SECS           (30)               /* 30 seconds. */

/**
 * @brief Length of time to check for getting the OTA image data.
 *
 * After getting the Job (or during a Direct download), this is the amount of time to wait before
 * canceling the download.
 * Use 0x00 to disable.
 */
#define CY_OTA_DATA_CHECK_TIME_SECS          (20 * 60)           /* 20 minutes. */

/**
 * @brief Number of retries when attempting an OTA update.
 *
 * This is used to determine # retries when attempting an OTA update.
 */
#define CY_OTA_RETRIES                      (3)             /* Retry entire process 3 times. */

/**
 * @brief Number of retries when attempting to contact the server.
 *
 * This is used to determine # retries when connecting to the server during an OTA update check.
 */
#define CY_OTA_CONNECT_RETRIES              (3)             /* 3 server connect retries  */

/**
 * @brief Number of OTA download retries
 *
 * Retry count for attempts at downloading the OTA Image
 */
#define CY_OTA_MAX_DOWNLOAD_TRIES           (3)             /* 3 download OTA Image retries */

/**
 * @brief HTTP timeout for sending messages
 *
 */
#define CY_OTA_HTTP_TIMEOUT_SEND            (3000)         /* 3 seconds send timeout (ms). */

/**
 * @brief HTTP timeout for receiving messages
 *
 */
#define CY_OTA_HTTP_TIMEOUT_RECEIVE         (3000)         /* 3 seconds receive timeout. */


/**********************************************************************
 * Message Defines
 **********************************************************************/

/**
 * @brief Last part of the topic to subscribe.
 *
 * Topic for the device to send a message to the Publisher:
 *  "COMPANY_TOPIC_PREPEND / BOARD_NAME / PUBLISHER_LISTEN_TOPIC"
 *  The combined topic must match the Publisher's subscribe topic.
 *
 * Override in cy_ota_config.h
 */
#define PUBLISHER_LISTEN_TOPIC              "publish_notify"

/**
 * @brief First part of the topic to subscribe / publish.
 *
 * Topic for the device to send a message to the Publisher:
 *  "COMPANY_TOPIC_PREPEND / BOARD_NAME / PUBLISHER_LISTEN_TOPIC"
 *  For testing, add [COMPANY_TOPIC_PREPEND=<uniquename>] to make build
 *  Add [-c <uniquename>] to python publisher.py
 */
#ifndef COMPANY_TOPIC_PREPEND
#define COMPANY_TOPIC_PREPEND               "OTAUpdate"
#endif

/**
 * @brief End of topic to send a message to the Publisher for Direct download.
 */
#define PUBLISHER_DIRECT_TOPIC               "OTAImage"

/**
 * @brief Update Successful message.
 *
 * Used with sprintf() to create the RESULT message to the Broker/server.
 */
#define CY_OTA_RESULT_SUCCESS               "Success"

/**
* @brief Update Failure message
*
* Used with sprintf() to create the RESULT message to the Broker/server.
*/
#define CY_OTA_RESULT_FAILURE               "Failure"

/**
 * @brief Default Job document name.
 *
 * Name of the update JSON file for HTTP.
 */
#ifndef CY_OTA_HTTP_JOB_FILE
#define CY_OTA_HTTP_JOB_FILE               "/ota_update.json"
#endif

/**
 * @brief Default OTA image file name.
 *
 * Name of the OTA image for HTTP.
 */
#ifndef CY_OTA_HTTP_DATA_FILE
#define CY_OTA_HTTP_DATA_FILE              "/ota-update.bin"
#endif

/**
 * @brief Device message to the Publisher to ask about updates.
 * Used with sprintf() to insert the current version and UniqueTopicName at runtime.
 * Override if desired by defining in cy_ota_config.h.
 */
#define CY_OTA_SUBSCRIBE_UPDATES_AVAIL \
"{\
\"Message\":\"Update Availability\", \
\"Manufacturer\": \"Express Widgits Corporation\", \
\"ManufacturerID\": \"EWCO\", \
\"ProductID\": \"Easy Widgit\", \
\"SerialNumber\": \"ABC213450001\", \
\"BoardName\": \"CY8CPROTO_062_4343W\", \
\"Version\": \"%d.%d.%d\", \
\"UniqueTopicName\": \"%s\"\
}"

/**
 * @brief Device message to the Publisher to ask for a full download.
 * *
 * Used with sprintf() to insert values at runtime.
 *   Current Application Version
 *   UniqueTopicName
 *   Size
 * Override if desired by defining in cy_ota_config.h.
 */
#define CY_OTA_DOWNLOAD_REQUEST \
"{\
\"Message\":\"Request Update\", \
\"Manufacturer\": \"Express Widgits Corporation\", \
\"ManufacturerID\": \"EWCO\", \
\"ProductID\": \"Easy Widgit\", \
\"SerialNumber\": \"ABC213450001\", \
\"BoardName\": \"CY8CPROTO_062_4343W\", \
\"Version\": \"%d.%d.%d\", \
\"UniqueTopicName\": \"%s\"\
}"

/**
 * @brief Device message to the Publisher to ask for a chunk of data.
 * *
 * Used with sprintf() to insert values at runtime.
 *   Current Application Version
 *   UniqueTopicName
 *   FileName
 *   Offset
 *   Size
 * Override if desired by defining in cy_ota_config.h.
 */
#define CY_OTA_DOWNLOAD_CHUNK_REQUEST \
"{\
\"Message\":\"Request Data Chunk\", \
\"Manufacturer\": \"Express Widgits Corporation\", \
\"ManufacturerID\": \"EWCO\", \
\"ProductID\": \"Easy Widgit\", \
\"SerialNumber\": \"ABC213450001\", \
\"BoardName\": \"CY8CPROTO_062_4343W\", \
\"Version\": \"%d.%d.%d\", \
\"UniqueTopicName\": \"%s\", \
\"Filename\": \"%s\", \
\"Offset\": \"%ld\", \
\"Size\": \"%ld\"\
}"

/**
 * @brief Device JSON document to respond to the MQTT Publisher.
 *
 * Used with sprintf() to create the JSON message.
 * Override if desired by defining in cy_ota_config.h.
 */
#define CY_OTA_MQTT_RESULT_JSON \
"{\
\"Message\":\"%s\", \
\"UniqueTopicName\": \"%s\"\
}"

/**
 * @brief Device JSON document to respond to the HTTP server.
 *
 * Used with sprintf() to create the JSON message.
 * Override if desired by defining in cy_ota_config.h.
 */
#define CY_OTA_HTTP_RESULT_JSON \
"{\
\"Message\":\"%s\", \
\"File\":\"%s\" \
}"

/**
 * @brief HTTP GET template.
 *
 * Used with sprintf() to create the GET request for the HTTP server.
 */
#ifndef CY_OTA_HTTP_GET_TEMPLATE
#define CY_OTA_HTTP_GET_TEMPLATE \
    "GET %s HTTP/1.1\r\n" \
    "Host: %s:%d \r\n" \
    "\r\n"
#endif

/**
 * @brief HTTP GET Range template.
 *
 * Used with sprintf() to create the GET request for the HTTP server
 * when requesting a range of data.
 */
#ifndef CY_OTA_HTTP_GET_RANGE_TEMPLATE
#define CY_OTA_HTTP_GET_RANGE_TEMPLATE \
    "GET %s HTTP/1.1\r\n" \
    "Host: %s:%d \r\n" \
    "Range: bytes=%ld-%ld \r\n" \
    "\r\n"
#endif

/**
 * @brief HTTP POST template.
 *
 * Used with sprintf() to create the POST message for the HTTP server.
 */
#ifndef CY_OTA_HTTP_POST_TEMPLATE
#define CY_OTA_HTTP_POST_TEMPLATE \
    "POST %s HTTP/1.1\r\n" \
    "Content-Length:%ld \r\n" \
    "\r\n%s"
#endif

/**********************************************************************
 * MQTT Defines
 **********************************************************************/

/**
 * @brief The keepalive interval for MQTT.
 * @brief Maximum number of MQTT Topics.
 *
 * An MQTT ping request will be sent periodically at this interval.
 * The maximum number of Topics for subscribing.
 */
#define CY_OTA_MQTT_KEEP_ALIVE_SECONDS          (60)                /* 60 second keepalive. */

/**
 * @brief Maximum number of MQTT Topics.
 *
 * The maximum number of Topics for subscribing.
 */
#define CY_OTA_MQTT_MAX_TOPICS                  (2)

/**
 * @brief TOPIC prefix
 *
 * Used as prefix for "Will" and "Acknowledgement" messages.
 */
#define CY_OTA_MQTT_TOPIC_PREFIX                "cy_ota_device"

/**
 * @brief The first characters in the client identifier.
 *
 * A timestamp is appended to this prefix to create a unique
 *   client identifer for each connection.
 */
#define CY_OTA_MQTT_CLIENT_ID_PREFIX            "cy_device"


/** \} group_ota_config */

#ifdef __cplusplus
    }
#endif

#endif /* CY_OTA_CONFIG_H__ */

/** \} group_cy_ota */