The CY8CKIT-062S2-AI PSoC™ 62S2 AI Evaluation Kit is a cost effective and small development kit providing the best of Infineon's solutions to drive adoption of Infineon's hardware, Imagimob Studio and Infineon's Software products.
To use code from the BSP, simply include a reference to cybsp.h
.
- Support of up to 512-Mb NOR flash
- Supports Full-Speed USB, a PDM-PCM digital microphone interface, a Quad-SPI interface, an I2C interface.
- Supports 6-axis motion sensor (BMI270)
- Supports magnetometer (BMM350)
- Supports barometric pressure sensor (DPS368)
- Supports RADAR sensor (BGT60TR13C)
- PSoC™ 62S2 AI Evaluation board
The BSP has a few hooks that allow its behavior to be configured. Some of these items are enabled by default while others must be explicitly enabled. Items enabled by default are specified in the CY8CKIT-062S2-AI.mk file. The items that are enabled can be changed by creating a custom BSP or by editing the application makefile.
Components:
- Device specific category reference (e.g.: CAT1) - This component, enabled by default, pulls in any device specific code for this board.
Defines:
- CYBSP_WIFI_CAPABLE - This define, disabled by default, causes the BSP to initialize the interface to an onboard wireless chip if it has one.
- CY_USING_HAL - This define, enabled by default, specifies that the HAL is intended to be used by the application. This will cause the BSP to include the applicable header file and to initialize the system level drivers.
- CYBSP_CUSTOM_SYSCLK_PM_CALLBACK - This define, disabled by default, causes the BSP to skip registering its default SysClk Power Management callback, if any, and instead to invoke the application-defined function
cybsp_register_custom_sysclk_pm_callback
to register an application-specific callback.
Clock | Source | Output Frequency |
---|---|---|
FLL | IMO | 100.0 MHz |
PLL | IMO | 48.0 MHz |
CLK_HF0 | CLK_PATH0 | 100 MHz |
- System Active Power Mode: LP
- System Idle Power Mode: Deep Sleep
- VDDA Voltage: 3300 mV
- VDDD Voltage: 3300 mV
See the BSP Setttings for additional board specific configuration settings.
The CY8CKIT-062S2-AI Board Support Package provides a set of APIs to configure, initialize and use the board resources.
See the BSP API Reference Manual for the complete list of the provided interfaces.
- CY8CKIT-062S2-AI BSP API Reference Manual
- CY8CKIT-062S2-AI Documentation
- Cypress Semiconductor, an Infineon Technologies Company
- Infineon GitHub
- ModusToolbox™
© Cypress Semiconductor Corporation (an Infineon company) or an affiliate of Cypress Semiconductor Corporation, 2019-2024.