Skip to content
Permalink
bb01f1a82e
Switch branches/tags

Name already in use

A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?

TARGET_CYSBSYSKIT-DEV-01/README.md

Go to file
 
 
Cannot retrieve contributors at this time
CYSBSYSKIT-DEV-01 BSP Overview Features Kit Features: Kit Contents: BSP Configuration Clock Configuration Power Configuration API Reference Manual More information
78 lines (54 sloc) 3.78 KB
Raw Blame

CYSBSYSKIT-DEV-01 BSP

Overview

The CYSBSYSKIT-DEV-01 Rapid IoT Connect Developer Kit allows for evaluation of the CYSBSYS-RP01 Rapid IoT Connect module on a standard Feather form factor. The CYSBSYS-RP01 Rapid IoT Connect module is a turnkey module that enables secure, scalable, and reliable compute and connect.

To use code from the BSP, simply include a reference to cybsp.h.

Features

Kit Features:

  • CYSBSYS-RP01 module
  • Free application processor (150-MHz Arm® Cortex®-M4) and secondary processor (100-MHz Arm® Cortex®-M0+)
  • Support of up to 2MB Flash and 1MB SRAM
  • 512-Mbit external Quad SPI NOR Flash that provides a fast, expandable memory for data and code
  • KitProg3 on-board SWD programmer/debugger, USB-UART, and USB-I2C bridge functionality
  • A user LED, a user button, and a reset button
  • Battery connector, charging IC, and charging indicator LED
  • One KitProg3 mode button, one KitProg3 status LED, and one KitProg3 power LED
  • OPTIGA Trust M advanced security controller for secure data storage
  • Thermistor for sensing the ambient temperature
  • Feather compatible pin header

Kit Contents:

  • CYSBSYSKIT-DEV-01 Rapid IoT Connect Developer Edition Kit

BSP Configuration

The BSP has a few hooks that allow its behavior to be configured. Some of these items are enabled by default while others must be explicitly enabled. Items enabled by default are specified in the CYSBSYSKIT-DEV-01.mk file. The items that are enabled can be changed by creating a custom BSP or by editing the application makefile.

Components:

  • Device specific category reference (e.g.: CAT1) - This component, enabled by default, pulls in any device specific code for this board.

Defines:

  • CYBSP_WIFI_CAPABLE - This define, disabled by default, causes the BSP to initialize the interface to an onboard wireless chip if it has one.
  • CY_USING_HAL - This define, enabled by default, specifies that the HAL is intended to be used by the application. This will cause the BSP to include the applicable header file and to initialize the system level drivers.
  • CYBSP_CUSTOM_SYSCLK_PM_CALLBACK - This define, disabled by default, causes the BSP to skip registering its default SysClk Power Management callback, if any, and instead to invoke the application-defined function cybsp_register_custom_sysclk_pm_callback to register an application-specific callback.

Clock Configuration

Clock Source Output Frequency
FLL IMO 100.0 MHz
PLL IMO 48.0 MHz
CLK_HF0 CLK_PATH0 100 MHz
CLK_HF2 CLK_PATH0 100 MHz

Power Configuration

  • System Active Power Mode: LP
  • System Idle Power Mode: Deep Sleep
  • VDDA Voltage: 3300 mV
  • VDDD Voltage: 1800 mV

See the BSP Setttings for additional board specific configuration settings.

API Reference Manual

The CYSBSYSKIT-DEV-01 Board Support Package provides a set of APIs to configure, initialize and use the board resources.

See the BSP API Reference Manual for the complete list of the provided interfaces.

More information

© Cypress Semiconductor Corporation (an Infineon company) or an affiliate of Cypress Semiconductor Corporation, 2019-2022.