wiced_platform.h

/*
 * Copyright 2016-2024, Cypress Semiconductor Corporation (an Infineon company) or
 * an affiliate of Cypress Semiconductor Corporation.  All rights reserved.
 *
 * This software, including source code, documentation and related
 * materials ("Software") is owned by Cypress Semiconductor Corporation
 * or one of its affiliates ("Cypress") and is protected by and subject to
 * worldwide patent protection (United States and foreign),
 * United States copyright laws and international treaty provisions.
 * Therefore, you may use this Software only as provided in the license
 * agreement accompanying the software package from which you
 * obtained this Software ("EULA").
 * If no EULA applies, Cypress hereby grants you a personal, non-exclusive,
 * non-transferable license to copy, modify, and compile the Software
 * source code solely for use in connection with Cypress's
 * integrated circuit products.  Any reproduction, modification, translation,
 * compilation, or representation of this Software except as specified
 * above is prohibited without the express written permission of Cypress.
 *
 * Disclaimer: THIS SOFTWARE IS PROVIDED AS-IS, WITH NO WARRANTY OF ANY KIND,
 * EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, NONINFRINGEMENT, IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress
 * reserves the right to make changes to the Software without notice. Cypress
 * does not assume any liability arising out of the application or use of the
 * Software or any product or circuit described in the Software. Cypress does
 * not authorize its products for use in any products where a malfunction or
 * failure of the Cypress product may reasonably be expected to result in
 * significant property damage, injury or death ("High Risk Product"). By
 * including Cypress's product in a High Risk Product, the manufacturer
 * of such system or application assumes all risk of such use and in doing
 * so agrees to indemnify Cypress against all liability.
 */

#pragma once

#include <stddef.h>
#include "wiced.h"
#include "wiced_hal_gpio.h"

//! Number of LEDs available on the platform.
typedef enum
{
    WICED_PLATFORM_LED_1,  //!< LED 1
    WICED_PLATFORM_LED_2,  //!< LED 2
    WICED_PLATFORM_LED_MAX //!< Max LED for error check
} wiced_platform_led_number_t;

//! Number of Buttons available on the platform.
typedef enum
{
    WICED_PLATFORM_BUTTON_1,  //!< BUTTON 1
    WICED_PLATFORM_BUTTON_2,  //!< BUTTON 2
    WICED_PLATFORM_BUTTON_3,  //!< BUTTON 3
    WICED_PLATFORM_BUTTON_4,  //!< BUTTON 4
    WICED_PLATFORM_BUTTON_MAX //!< Max button for error check
} wiced_platform_button_number_t;

#define WICED_PLATFORM_BUTTON_MAX_DEF     4   //define for preprocessor

//! Number of GPIO available on the platform.
// Configurable via SuperMux
typedef enum
{
    WICED_PLATFORM_GPIO_1,  //!< GPIO 1
    WICED_PLATFORM_GPIO_2,  //!< GPIO 2
    WICED_PLATFORM_GPIO_3,  //!< GPIO 3
    WICED_PLATFORM_GPIO_4,  //!< GPIO 4
    WICED_PLATFORM_GPIO_5,  //!< GPIO 5
    WICED_PLATFORM_GPIO_6,  //!< GPIO 6
    WICED_PLATFORM_GPIO_7,  //!< GPIO 7
    WICED_PLATFORM_GPIO_8,  //!< GPIO 8
    WICED_PLATFORM_GPIO_9,  //!< GPIO 9
    WICED_PLATFORM_GPIO_10,  //!< GPIO 10
    WICED_PLATFORM_GPIO_11,  //!< GPIO 11
    WICED_PLATFORM_GPIO_12,  //!< GPIO 12
    WICED_PLATFORM_GPIO_13,  //!< GPIO 13
    WICED_PLATFORM_GPIO_14,  //!< GPIO 14
    WICED_PLATFORM_GPIO_15,  //!< GPIO 15
    WICED_PLATFORM_GPIO_16,  //!< GPIO 16
    WICED_PLATFORM_GPIO_17,  //!< GPIO 17
    WICED_PLATFORM_GPIO_18,  //!< GPIO 18
    WICED_PLATFORM_GPIO_19,  //!< GPIO 19
    WICED_PLATFORM_GPIO_20,  //!< GPIO 20
    WICED_PLATFORM_GPIO_21,  //!< GPIO 21
    WICED_PLATFORM_GPIO_22,  //!< GPIO 22
    WICED_PLATFORM_GPIO_23,  //!< GPIO 23
    WICED_PLATFORM_GPIO_24,  //!< GPIO 24
    WICED_PLATFORM_GPIO_25,  //!< GPIO 25
    WICED_PLATFORM_GPIO_26,  //!< GPIO 26
    WICED_PLATFORM_GPIO_27,  //!< GPIO 27
    WICED_PLATFORM_GPIO_28,  //!< GPIO 28
    WICED_PLATFORM_GPIO_29,  //!< GPIO 29
    WICED_PLATFORM_GPIO_30,  //!< GPIO 30
    WICED_PLATFORM_GPIO_31,  //!< GPIO 31
    WICED_PLATFORM_GPIO_32,  //!< GPIO 32
    WICED_PLATFORM_GPIO_33,  //!< GPIO 33
    WICED_PLATFORM_GPIO_34,  //!< GPIO 34
    WICED_PLATFORM_GPIO_35,  //!< GPIO 35
    WICED_PLATFORM_GPIO_36,  //!< GPIO 36
    WICED_PLATFORM_GPIO_37,  //!< GPIO 37
    WICED_PLATFORM_GPIO_38,  //!< GPIO 38
    WICED_PLATFORM_GPIO_39,  //!< GPIO 39
    WICED_PLATFORM_GPIO_40,  //!< GPIO 40
    WICED_PLATFORM_GPIO_41,  //!< GPIO 41
    WICED_PLATFORM_GPIO_42,  //!< GPIO 42
    WICED_PLATFORM_GPIO_43,  //!< GPIO 43
    WICED_PLATFORM_GPIO_44,  //!< GPIO 44
    WICED_PLATFORM_GPIO_45,  //!< GPIO 45
    WICED_PLATFORM_GPIO_MAX //!< Max GPIO for error check
} wiced_platform_gpio_number_t;

//! Possible interrupt configuration for platform buttons
typedef enum
{
    WICED_PLATFORM_BUTTON_BOTH_EDGE = GPIO_EN_INT_BOTH_EDGE,   //!< indicates that app. should receive interrupt on both edges
    WICED_PLATFORM_BUTTON_RISING_EDGE = GPIO_EN_INT_RISING_EDGE, //!< indicates that app. should receive interrupt only for rising edge
    WICED_PLATFORM_BUTTON_FALLING_EDGE = GPIO_EN_INT_FALLING_EDGE,//!< indicates that app. should receive interrupt only for falling edge
} wiced_platform_button_interrupt_edge_t;

//! List of pins available on the platform
enum wiced_platform_pins
{
    PLATFORM_GPIO_0,
    PLATFORM_GPIO_1,
    PLATFORM_GPIO_2,
    PLATFORM_GPIO_3,
    PLATFORM_GPIO_4,
    PLATFORM_GPIO_5,
    PLATFORM_GPIO_6,
    PLATFORM_GPIO_7,
    PLATFORM_GPIO_8,
    PLATFORM_GPIO_9,
    PLATFORM_GPIO_10,
    PLATFORM_GPIO_11,
    PLATFORM_GPIO_12,
    PLATFORM_GPIO_13,
    PLATFORM_GPIO_14,
    PLATFORM_GPIO_15,
    PLATFORM_GPIO_16,
    PLATFORM_GPIO_17,
    PLATFORM_GPIO_18,
    PLATFORM_GPIO_19,
    PLATFORM_GPIO_20,
    PLATFORM_GPIO_21,
    PLATFORM_GPIO_22,
    PLATFORM_GPIO_23,
    PLATFORM_GPIO_24,
    PLATFORM_GPIO_25,
    PLATFORM_GPIO_26,
    PLATFORM_GPIO_27,
    PLATFORM_GPIO_28,
    PLATFORM_GPIO_29,
    PLATFORM_GPIO_30,
    PLATFORM_GPIO_31,
    PLATFORM_GPIO_32,
    PLATFORM_GPIO_33,
    PLATFORM_GPIO_34,
    PLATFORM_GPIO_35,
    PLATFORM_GPIO_36,
    PLATFORM_GPIO_37,
    PLATFORM_GPIO_38,
    PLATFORM_GPIO_39,
    PLATFORM_GPIO_40,
    PLATFORM_GPIO_41,
    PLATFORM_GPIO_42,
    PLATFORM_GPIO_43,
    PLATFORM_GPIO_44,
    PLATFORM_GPIO_45,
    PLATFORM_GPIO_MAX_PINS
};

/**
 * configuration for the platform GPIOs
 */
typedef struct
{
    wiced_bt_gpio_numbers_t gpio_pin; /**< WICED GPIO pin */
    wiced_bt_gpio_function_t functionality; /**< chosen functionality for the pin */
}
wiced_platform_gpio_t;

/**
 * Configuration for platform LEDs
 */
typedef struct
{
    wiced_bt_gpio_numbers_t* gpio; /**< WICED GPIO pin */
    uint32_t config; /**< configuration like GPIO_PULL_DOWN,GPIO_PULL_UP etc., */
    uint32_t default_state; /**< GPIO_PIN_OUTPUT_HIGH/GPIO_PIN_OUTPUT_LOW */
}
wiced_platform_led_config_t;

/**
 * Configuration for platform Buttons
 */
typedef struct
{
    wiced_bt_gpio_numbers_t* gpio; /**< WICED GPIO pin */
    uint32_t config; /**< configuration like GPIO_PULL_DOWN,GPIO_PULL_UP etc., interrupt is configured through wiced_platform_register_button_callback(...) */
    uint32_t default_state; /**< GPIO_PIN_OUTPUT_HIGH/GPIO_PIN_OUTPUT_LOW */
    uint32_t button_pressed_value; /**< Button pressed value */
}
wiced_platform_button_config_t;

/**
 * Configuration for platform GPIOs
 */
typedef struct
{
    wiced_bt_gpio_numbers_t* gpio; /**< WICED GPIO pin */
    uint32_t config; /**< configuration like GPIO_PULL_DOWN,GPIO_PULL_UP etc., interrupt is configured through wiced_platform_register_button_callback(...) */
    uint32_t default_state; /**< GPIO_PIN_OUTPUT_HIGH/GPIO_PIN_OUTPUT_LOW */
}
wiced_platform_gpio_config_t;

/*! pin for button 1 */
#define WICED_GPIO_PIN_BUTTON_1       WICED_P00
#define WICED_GPIO_PIN_BUTTON         WICED_GPIO_PIN_BUTTON_1

/*! configuration settings for button, x can be GPIO_EN_INT_RISING_EDGE or GPIO_EN_INT_FALLING_EDGE or GPIO_EN_INT_BOTH_EDGE */
#define WICED_GPIO_BUTTON_SETTINGS(x)                       ( GPIO_INPUT_ENABLE | GPIO_PULL_UP | x )

/*! pin for LED 1 */
#define WICED_GPIO_PIN_LED_1     WICED_P26
/*! pin for LED 2 */
#define WICED_GPIO_PIN_LED_2     WICED_P27

#define WICED_PUART_TXD          WICED_P32
#define WICED_PUART_RXD          WICED_P33

#define WICED_BUTTON1 (WICED_P00)
#define WICED_BUTTON2 (WICED_P38)
#define WICED_BUTTON3 (WICED_P34)
#define WICED_BUTTON4 (WICED_P17)
#define WICED_RESET_PIN WICED_P21

/*! Pin state for the LED on. */
#ifndef LED_STATE_ON
#define LED_STATE_ON          (GPIO_PIN_OUTPUT_LOW)
#endif
/*! Pin state for the LED off. */
#ifndef LED_STATE_OFF
#define LED_STATE_OFF         (GPIO_PIN_OUTPUT_HIGH)
#endif

/*! Pin state for when a button is pressed. */
#ifndef BTN_PRESSED
#define BTN_PRESSED           (GPIO_PIN_OUTPUT_LOW)
#endif
/*! Pin state for when a button is released. */
#ifndef BTN_OFF
#define BTN_OFF               (GPIO_PIN_OUTPUT_HIGH)
#endif

/* Platform function */
void     wiced_platform_init(void);
uint32_t wiced_platform_get_button_pressed_value(wiced_platform_button_number_t button);
wiced_bool_t wiced_platform_transport_init(void *p_rx_data_handler);

/* utility functions */
void     wiced_platform_register_button_callback(wiced_platform_button_number_t button, void (*userfn)(void*, uint8_t), void* userdata, wiced_platform_button_interrupt_edge_t trigger_edge);