Skip to content
Permalink
80272ab479
Switch branches/tags

Name already in use

A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?

TARGET_CYW920829M2EVK-02/README.md

Go to file
 
 
Cannot retrieve contributors at this time
CYW920829M2EVK-02 BSP Overview Features Kit Features: Kit Contents: BSP Configuration Clock Configuration Power Configuration API Reference Manual More information
76 lines (51 sloc) 3.47 KB
Raw Blame

CYW920829M2EVK-02 BSP

Overview

The Infineon AIROC™ CYW20829 Bluetooth® LE evaluation kit (CYW92089M2EVK-02) enables evaluation, prototyping, and development of a wide array of IoT applications using the AIROC™ CYW20829, a low power and high performance Bluetooth® LE MCU.

To use code from the BSP, simply include a reference to cybsp.h.

Features

Kit Features:

  • AIROC™ CYW20829 Bluetooth® LE MCU in 56 pin QFN package
  • Arduino compatible headers for hardware expansion
  • On-board sensors - 6-axis IMU, thermistor, Infineon analog microphone, and Infineon digital microphone
  • User switches, RGB LED and user LEDs
  • USB connector for power, programming and USB-UART bridge

Kit Contents:

  • CYW20829 evaluation board (CYW9BTM2BASE3+CYW920829M2IPA2)
  • USB Type-A to Micro-B cable
  • Six jumper wires (five inches each)
  • Quick start guide

BSP Configuration

The BSP has a few hooks that allow its behavior to be configured. Some of these items are enabled by default while others must be explicitly enabled. Items enabled by default are specified in the CYW920829M2EVK-02.mk file. The items that are enabled can be changed by creating a custom BSP or by editing the application makefile.

Components:

  • Device specific category reference (e.g.: CAT1) - This component, enabled by default, pulls in any device specific code for this board.

Defines:

  • CYBSP_WIFI_CAPABLE - This define, disabled by default, causes the BSP to initialize the interface to an onboard wireless chip if it has one.
  • CY_USING_HAL - This define, enabled by default, specifies that the HAL is intended to be used by the application. This will cause the BSP to include the applicable header file and to initialize the system level drivers.
  • CYBSP_CUSTOM_SYSCLK_PM_CALLBACK - This define, disabled by default, causes the BSP to skip registering its default SysClk Power Management callback, if any, and instead to invoke the application-defined function cybsp_register_custom_sysclk_pm_callback to register an application-specific callback.

Clock Configuration

Clock Source Output Frequency
FLL IHO 96.0 MHz
CLK_HF0 CLK_PATH0 96 MHz
CLK_HF1 CLK_PATH0 96 MHz
CLK_HF2 CLK_PATH2 48 MHz
CLK_HF3 CLK_PATH1 24 MHz

Power Configuration

  • System Active Power Mode: LP
  • System Idle Power Mode: Deep Sleep
  • VDDA Voltage: 3300 mV
  • VDDD Voltage: 3300 mV

See the BSP Setttings for additional board specific configuration settings.

API Reference Manual

The CYW920829M2EVK-02 Board Support Package provides a set of APIs to configure, initialize and use the board resources.

See the BSP API Reference Manual for the complete list of the provided interfaces.

More information

© Cypress Semiconductor Corporation (an Infineon company) or an affiliate of Cypress Semiconductor Corporation, 2019-2024.