Skip to content
Permalink
e6473ccc7f
Switch branches/tags

Name already in use

A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?

TARGET_CYW954907AEVAL1F/README.md

Go to file
 
 
Cannot retrieve contributors at this time
CYW954907AEVAL1F BSP Overview Features Kit Features: Kit Contents: BSP Configuration API Reference Manual More information
63 lines (41 sloc) 3.27 KB
Raw Blame

CYW954907AEVAL1F BSP

Overview

The CYW954907AEVAL1F Evaluation kit enables you to evaluate and develop single-chip Wi-Fi applications using CYW54907 devices. The kit uses a module based on CYW54907 device. CYW54907 is a single-chip 802.11n dual-band (2.4 GHz and 5 GHz) Wi-Fi SoC that features 320-MHz Arm® Cortex®-R4 MCU for application subsystem and various on-chip interfaces like Ethernet (RMII/MII), UART, SPI/QSPI and I2C that in totality offers a very small-footprint IoT solution.

To use code from the BSP, simply include a reference to cybsp.h.

Features

Kit Features:

  • CYW54907 based module
  • On-board PCB antenna with an option to connect external antenna
  • Arduino compatible headers for hardware expansion
  • Custom header to bring out additional GPIOs (WICED header)
  • User switches and LEDs
  • On-board programmer and debugger using USB interface and USB-UART bridge
  • RJ45 connector for Ethernet
  • 5 V to 12 V input using USB connector or power jack

Kit Contents:

  • CYW954907AEVAL1F Evaluation board
  • USB Standard-A to Micro-B cable
  • Quick Start Guide

BSP Configuration

The BSP has a few hooks that allow its behavior to be configured. Some of these items are enabled by default while others must be explicitly enabled. Items enabled by default are specified in the CYW954907AEVAL1F.mk file. The items that are enabled can be changed by creating a custom BSP or by editing the application makefile.

Components:

  • Device specific category reference (e.g.: CAT1) - This component, enabled by default, pulls in any device specific code for this board.

Defines:

  • CYBSP_WIFI_CAPABLE - This define, disabled by default, causes the BSP to initialize the interface to an onboard wireless chip if it has one.
  • CY_USING_HAL - This define, enabled by default, specifies that the HAL is intended to be used by the application. This will cause the BSP to include the applicable header file and to initialize the system level drivers.
  • CYBSP_CUSTOM_SYSCLK_PM_CALLBACK - This define, disabled by default, causes the BSP to skip registering its default SysClk Power Management callback, if any, and instead to invoke the application-defined function cybsp_register_custom_sysclk_pm_callback to register an application-specific callback.

See the BSP Setttings for additional board specific configuration settings.

API Reference Manual

The CYW954907AEVAL1F Board Support Package provides a set of APIs to configure, initialize and use the board resources.

See the BSP API Reference Manual for the complete list of the provided interfaces.

More information

© Cypress Semiconductor Corporation (an Infineon company) or an affiliate of Cypress Semiconductor Corporation, 2019-2022.