CYW989829M2EVB-01 BSP

Overview

The Infineon AIROC™ CYW89829 Bluetooth® LE evaluation board (CYW989829M2EVB-01) enables evaluation, prototyping, and development of a wide array of Industrial and Automotive IoT applications using the AIROC™ CYW89829, a low power and high performance Bluetooth® LE MCU.

To use code from the BSP, simply include a reference to cybsp.h.

Features

Kit Features:

AIROC™ CYW89829 Bluetooth® LE MCU in 77 pin BGA SIP package
Arduino compatible headers for hardware expansion
10-pin SWD connectors

Kit Contents:

CYW89829 evaluation board (CYW9BTM2AUAD+CYW989829SIPM2IPA1)
USB-UART cable
Quick start guide

BSP Configuration

The BSP has a few hooks that allow its behavior to be configured. Some of these items are enabled by default while others must be explicitly enabled. Items enabled by default are specified in the CYW989829M2EVB-01.mk file. The items that are enabled can be changed by creating a custom BSP or by editing the application makefile.

Components:

Device specific category reference (e.g.: CAT1) - This component, enabled by default, pulls in any device specific code for this board.

Defines:

CYBSP_WIFI_CAPABLE - This define, disabled by default, causes the BSP to initialize the interface to an onboard wireless chip if it has one.
CY_USING_HAL - This define, enabled by default, specifies that the HAL is intended to be used by the application. This will cause the BSP to include the applicable header file and to initialize the system level drivers.
CYBSP_CUSTOM_SYSCLK_PM_CALLBACK - This define, disabled by default, causes the BSP to skip registering its default SysClk Power Management callback, if any, and instead to invoke the application-defined function cybsp_register_custom_sysclk_pm_callback to register an application-specific callback.

Clock Configuration

Clock	Source	Output Frequency
FLL	IHO	96.0 MHz
CLK_HF0	CLK_PATH0	96 MHz
CLK_HF1	CLK_PATH0	96 MHz
CLK_HF2	CLK_PATH2	48 MHz
CLK_HF3	CLK_PATH1	24 MHz

Power Configuration

System Active Power Mode: LP
System Idle Power Mode: Deep Sleep
VDDA Voltage: 3300 mV
VDDD Voltage: 3300 mV

See the BSP Setttings for additional board specific configuration settings.

API Reference Manual

The CYW989829M2EVB-01 Board Support Package provides a set of APIs to configure, initialize and use the board resources.

See the BSP API Reference Manual for the complete list of the provided interfaces.

More information

© Cypress Semiconductor Corporation (an Infineon company) or an affiliate of Cypress Semiconductor Corporation, 2019-2024.

License

Infineon/TARGET_CYW989829M2EVB-01

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages