KIT_PSoC4-HVMS-128K_LITE is a lite kit for the PSoC™ high-voltage (HV) mixed signal (MS) microcontrollers, a fully integrated programmable embedded systems for several automotive human machine interface (HMI), body and powertrain applications.
To use code from the BSP, simply include a reference to cybsp.h.
- On-board Programmer and Debugger
- Ready-to-Use CAPSENSE™ Buttons
- A 12-bit SAR ADC
- Fifth-generation multi-sense converter (MSC) block supporting capacitive sensing (CAPSENSE™)
- Digital peripherals, such as PWMs
- Serial communication interfaces along with a LIN/CXPI interface with integrated PHY
- High-voltage subsystem to operate directly off the 12-V car battery
- KIT_PSoC4-HVMS-128K_LITE Board
- USB Type-A to Micro-B cable
- Quick Start Guide
The BSP has a few hooks that allow its behavior to be configured. Some of these items are enabled by default while others must be explicitly enabled. Items enabled by default are specified in the KIT_PSoC4-HVMS-128K_LITE.mk file. The items that are enabled can be changed by creating a custom BSP or by editing the application makefile.
Components:
- Device specific category reference (e.g.: CAT1) - This component, enabled by default, pulls in any device specific code for this board.
Defines:
- CYBSP_WIFI_CAPABLE - This define, disabled by default, causes the BSP to initialize the interface to an onboard wireless chip if it has one.
- CY_USING_HAL - This define, enabled by default, specifies that the HAL is intended to be used by the application. This will cause the BSP to include the applicable header file and to initialize the system level drivers.
- CYBSP_CUSTOM_SYSCLK_PM_CALLBACK - This define, disabled by default, causes the BSP to skip registering its default SysClk Power Management callback, if any, and instead to invoke the application-defined function
cybsp_register_custom_sysclk_pm_callbackto register an application-specific callback.
| Clock | Source | Output Frequency |
|---|---|---|
| CLK_HF | CLK_IMO | 24 MHz |
- System Idle Power Mode: Active
- VDDA Voltage: 5000 mV
- VDDD Voltage: 5000 mV
See the BSP Setttings for additional board specific configuration settings.
The KIT_PSoC4-HVMS-128K_LITE Board Support Package provides a set of APIs to configure, initialize and use the board resources.
See the BSP API Reference Manual for the complete list of the provided interfaces.
- KIT_PSoC4-HVMS-128K_LITE BSP API Reference Manual
- KIT_PSoC4-HVMS-128K_LITE Documentation
- Cypress Semiconductor, an Infineon Technologies Company
- Infineon GitHub
- ModusToolbox™
© Cypress Semiconductor Corporation (an Infineon company) or an affiliate of Cypress Semiconductor Corporation, 2019-2024.