The CY7111 EZ-PD PMG1-S1 Prototyping Kit is a low cost prototyping platform which enables design and development of EZ- PD PMG1-S1 (CYPM1111-40LQXIT) based embedded applications with USB PD Sink capability.
To use code from the BSP, simply include a reference to cybsp.h
.
- USB PD 3.0 compliant Sink which can support up to 100W (20V, 5A) of power consumption.
- USB bus powered operation.
- KitProg3 based programming and debug interface.
- Access to the pins of PMG1-S1 silicon (CYPM1111-40LQXIT) in hardware and support for BSP, HAL, PDL and Middleware in Modus Toolbox.
- EZ-PD CYPM1111-40LQXIT based board
- Quick Start Guide
The BSP has a few hooks that allow its behavior to be configured. Some of these items are enabled by default while others must be explicitly enabled. Items enabled by default are specified in the PMG1-CY7111.mk file. The items that are enabled can be changed by creating a custom BSP or by editing the application makefile.
Components:
- Device specific category reference (e.g.: CAT1) - This component, enabled by default, pulls in any device specific code for this board.
Defines:
- CYBSP_WIFI_CAPABLE - This define, disabled by default, causes the BSP to initialize the interface to an onboard wireless chip if it has one.
- CY_USING_HAL - This define, enabled by default, specifies that the HAL is intended to be used by the application. This will cause the BSP to include the applicable header file and to initialize the system level drivers.
- CYBSP_CUSTOM_SYSCLK_PM_CALLBACK - This define, disabled by default, causes the BSP to skip registering its default SysClk Power Management callback, if any, and instead to invoke the application-defined function
cybsp_register_custom_sysclk_pm_callback
to register an application-specific callback.
Clock | Source | Output Frequency |
---|---|---|
CLK_HF | CLK_IMO | 48 MHz |
- System Idle Power Mode: Deep Sleep
- VDDA Voltage: 3300 mV
- VDDD Voltage: 3300 mV
See the BSP Setttings for additional board specific configuration settings.
The PMG1-CY7111 Board Support Package provides a set of APIs to configure, initialize and use the board resources.
See the BSP API Reference Manual for the complete list of the provided interfaces.
- PMG1-CY7111 BSP API Reference Manual
- PMG1-CY7111 Documentation
- Cypress Semiconductor, an Infineon Technologies Company
- Infineon GitHub
- ModusToolbox™
© Cypress Semiconductor Corporation (an Infineon company) or an affiliate of Cypress Semiconductor Corporation, 2019-2022.