Skip to content
Permalink
6f0f394fa7
Switch branches/tags

Name already in use

A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?

bless/cy_ble_stack_host_error.h

Go to file
 
 
Cannot retrieve contributors at this time
303 lines (205 sloc) 11.3 KB
Raw Blame
/*******************************************************************************
* \file cy_ble_stack_host_error.h
* \version 3.60
*
* \brief
* This file contains all the spec defined error code in Core Spec 5.0, Vol2, Part D
*
* Related Document:
* BLE Standard Spec - CoreV5.0
*
********************************************************************************
* \copyright
* Copyright 2017-2021, Cypress Semiconductor Corporation. All rights reserved.
* You may use this file only in accordance with the license, terms, conditions,
* disclaimers, and limitations in the end user license agreement accompanying
* the software package with which this file was provided.
*******************************************************************************/
#ifndef CY_BLE_STACK_HOST_ERROR_H_
#define CY_BLE_STACK_HOST_ERROR_H_
/**
\addtogroup group_ble_common_macros_error
@{
*/
#ifdef __cplusplus
extern "C" {
#endif /* __cplusplus */
/***************************************
** Constants
***************************************/
/* HCI Status error code */
/** Success */
#define CY_BLE_HCI_SUCCESS (0x00u)
/** Unknown HCI Command */
#define CY_BLE_HCI_ERROR_UNKNOWN_HCI_COMMAND (0x01u)
/** Unknown Connection Identifier */
#define CY_BLE_HCI_ERROR_NO_CONNECTION (0x02u)
/** Hardware Failure */
#define CY_BLE_HCI_ERROR_HARDWARE_FAILURE (0x03u)
/** \cond IGNORE */
/** Page Timeout */
#define CY_BLE_HCI_ERROR_PAGE_TIMEOUT (0x04u)
/** Authentication Failure */
#define CY_BLE_HCI_ERROR_AUTHENTICATION_FAILURE (0x05u)
/** PIN or Key Missing */
#define CY_BLE_HCI_ERROR_KEY_MISSING (0x06u)
/** \endcond */
/** Memory Capacity Exceeded */
#define CY_BLE_HCI_ERROR_MEMORY_FULL (0x07u)
/** Connection Timeout */
#define CY_BLE_HCI_ERROR_CONNECTION_TIMEOUT (0x08u)
/** Connection Limit Exceeded*/
#define CY_BLE_HCI_ERROR_MAX_NUMBER_OF_CONNECTIONS (0x09u)
/** \cond IGNORE */
/** Synchronous Connection Limit To A Device Exceeded */
#define CY_BLE_HCI_ERROR_MAX_NUMBER_OF_SCO_CONNECTIONS (0x0Au)
/** \endcond */
/** ACL Connection Already Exists */
#define CY_BLE_HCI_ERROR_ACL_CONNECTION_ALREADY_EXISTS (0x0Bu)
/** Command Disallowed */
#define CY_BLE_HCI_ERROR_COMMAND_DISALLOWED (0x0Cu)
/** \cond IGNORE */
/** Connection Rejected due to Limited Resources */
#define CY_BLE_HCI_ERROR_HOST_REJECTED_LIMITED_RESOURCES (0x0Du)
/** Connection Rejected Due To Security Reasons */
#define CY_BLE_HCI_ERROR_HOST_REJECTED_SECURITY_REASONS (0x0Eu)
/** Connection Rejected due to Unacceptable BD_ADDR */
#define CY_BLE_HCI_ERROR_HOST_REJECTED_PERSONAL_DEVICE (0x0Fu)
/** Connection Accept Timeout Exceeded */
#define CY_BLE_HCI_ERROR_HOST_TIMEOUT (0x10u)
/** Unsupported Feature or Parameter Value */
#define CY_BLE_HCI_ERROR_UNSUPPORTED_FEATURE_OR_PARAMETER (0x11u)
/** \endcond */
/** Invalid HCI Command Parameters */
#define CY_BLE_HCI_ERROR_INVALID_HCI_COMMAND_PARAMETERS (0x12u)
/** Remote User Terminated Connection */
#define CY_BLE_HCI_ERROR_OTHER_END_TERMINATED_USER (0x13u)
/** Remote Device Terminated Connection due to Low Resources */
#define CY_BLE_HCI_ERROR_OTHER_END_TERMINATED_LOW_RESOURCES (0x14u)
/** Remote Device Terminated Connection due to Power Off */
#define CY_BLE_HCI_ERROR_OTHER_END_TERMINATED_POWER_OFF (0x15u)
/** Connection Terminated By Local Host */
#define CY_BLE_HCI_ERROR_CONNECTION_TERMINATED_BY_LOCAL_HOST (0x16u)
/** Repeated Attempts */
#define CY_BLE_HCI_ERROR_REPEATED_ATTEMPTS (0x17u)
/** \cond IGNORE */
/** Pairing Not Allowed */
#define CY_BLE_HCI_ERROR_PAIRING_NOT_ALLOWED (0x18u)
/** Unknown LMP PDU */
#define CY_BLE_HCI_ERROR_UNKNOWN_LMP_PDU (0x19u)
/** Unsupported Remote Feature / Unsupported LMP Feature */
#define CY_BLE_HCI_ERROR_UNSUPPORTED_REMOTE_FEATURE (0x1Au)
/** SCO Offset Rejected */
#define CY_BLE_HCI_ERROR_SCO_OFFSET_REJECTED (0x1Bu)
/** SCO Interval Rejected */
#define CY_BLE_HCI_ERROR_SCO_INTERVAL_REJECTED (0x1Cu)
/** SCO Air Mode Rejected */
#define CY_BLE_HCI_ERROR_SCO_AIR_MODE_REJECTED (0x1Du)
/** Invalid LMP Parameters / Invalid LL Parameters */
#define CY_BLE_HCI_ERROR_INVALID_LMP_PARAMETERS (0x1Eu)
/** Unspecified Error */
#define CY_BLE_HCI_ERROR_UNSPECIFIED_ERROR (0x1Fu)
/** Unsupported LMP Parameter Value / Unsupported LL Parameter Value */
#define CY_BLE_HCI_ERROR_UNSUPPORTED_LMP_PARAMETER_VALUE (0x20u)
/** Role Change Not Allowed */
#define CY_BLE_HCI_ERROR_ROLE_CHANGE_NOT_ALLOWED (0x21u)
/** LMP Response Timeout / LL Response Timeout */
#define CY_BLE_HCI_ERROR_LMP_RESPONSE_TIMEOUT (0x22u)
/** LMP Error Transaction Collision / LL Procedure Collision */
#define CY_BLE_HCI_ERROR_LMP_ERROR_TRANSACTION_COLLISION (0x23u)
/** LMP PDU Not Allowed */
#define CY_BLE_HCI_ERROR_LMP_PDU_NOT_ALLOWED (0x24u)
/** Encryption Mode Not Acceptable */
#define CY_BLE_HCI_ERROR_ENCRYPTION_MODE_NOT_ACCEPTABLE (0x25u)
/** Link Key cannot be Changed */
#define CY_BLE_HCI_ERROR_LINK_KEY_CANNOT_BE_USED (0x26u)
/** Requested QoS Not Supported */
#define CY_BLE_HCI_ERROR_QOS_IS_NOT_SUPPORTED (0x27u)
/** Instant Passed */
#define CY_BLE_HCI_ERROR_INSTANT_PASSED (0x28u)
/** Pairing With Unit Key Not Supported */
#define CY_BLE_HCI_ERROR_PAIRING_WITH_UNIT_KEY_NOT_SUPPORTED (0x29u)
/** Different Transaction Collision */
#define CY_BLE_HCI_ERROR_DIFFERENT_TRANSACTION_COLLISION (0x2Au)
/* 0x2B Reserved for Future Use [E6305] */
/** QoS Unacceptable Parameter */
#define CY_BLE_HCI_ERROR_QOS_UNACCEPTABLE_PARAMETER (0x2Cu)
/** QoS Rejected */
#define CY_BLE_HCI_ERROR_QOS_REJECTED (0x2Du)
/** Channel Classification Not Supported */
#define CY_BLE_HCI_ERROR_CHANNEL_CLASSIFICATION_NOT_SUPPORTED (0x2Eu)
/** Insufficient Security */
#define CY_BLE_HCI_ERROR_INSUFFICIENT_SECURITY (0x2Fu)
/** Parameter Out Of Mandatory Range */
#define CY_BLE_HCI_ERROR_PARAMETER_OUT_OF_MANDATORY_RANGE (0x30u)
/* 0x31 Reserved for Future Use */
/** Role Switch Pending */
#define CY_BLE_HCI_ERROR_ROLE_SWITCH_PENDING (0x32u)
/* 0x33 Reserved for Future Use */
/** Reserved Slot Violation */
#define CY_BLE_HCI_ERROR_RESERVED_SLOT_VIOLATION (0x34u)
/** Role Switch Failed */
#define CY_BLE_HCI_ERROR_ROLE_SWITCH_FAILED (0x35u)
/** Extended Inquiry Response Too Large */
#define CY_BLE_HCI_ERROR_ENTENDED_INQUIRY_RESPONSE_TOO_LARGE (0x36u)
/** Secure Simple Pairing Not Supported By Host */
#define CY_BLE_HCI_ERROR_SECURE_SIMPLE_PAIRING_NOT_SUPPORTED_BY_HOST (0x37u)
/** Host Busy - Pairing */
#define CY_BLE_HCI_ERROR_HOST_BUSY_PAIRING (0x38u)
/** Connection Rejected due to No Suitable Channel Found */
#define CY_BLE_HCI_ERROR_CONNECTION_REJETED_DUE_TO_NO_SUITABLE_SCHANNEL_FOUND (0x39u)
/** \endcond */
/** Controller Busy */
#define CY_BLE_HCI_ERROR_CONTROLLER_BUSY (0x3Au)
/** Unacceptable Connection Parameters */
#define CY_BLE_HCI_ERROR_UNACCEPTEBALE_CONNECTION_INTERVAL (0x3Bu)
/** Directed Advertising Timeout */
#define CY_BLE_HCI_ERROR_DIRECTED_ADVERTISING_TIMEOUT (0x3Cu)
/** Connection Terminated due to MIC Failure */
#define CY_BLE_HCI_ERROR_CONNECTION_TREMINATED_DUE_TO_MIC_FAILURE (0x3Du)
/** Connection Failed to be Established */
#define CY_BLE_HCI_ERROR_CONNECTION_FAILED_TO_BE_ESTABLISHED (0x3Eu)
/** MAC Connection Failed */
#define CY_BLE_HCI_ERROR_MAC_CONNECTION_FAILED (0x3Fu)
/** Coarse Clock Adjustment Rejected but Will Try to Adjust Using Clock Dragging */
#define CY_BLE_HCI_ERROR_COARSE_CLK_ADJUSTMENT (0x40u)
/** Type0 Submap Not Defined */
#define CY_BLE_HCI_ERROR_TYPE0_SUBMAP_NOT_DEFINED (0x41u)
/** Unknown Advertising Identifier */
#define CY_BLE_HCI_ERROR_UNKNOWN_ADV_IDENTIFIER (0x42u)
/** Limit Reached */
#define CY_BLE_HCI_ERROR_LIMIT_REACHED (0x43u)
/** Operation Cancelled by Host */
#define CY_BLE_HCI_ERROR_OPERATION_CANCELLED_BY_HOST (0x44u)
/* Hardware Error event - Error Codes */
/** HCI transport sync lost error */
#define CY_BLE_HW_ERR_SYNC_LOST 0x01
/** HCI transport unknown pkt */
#define CY_BLE_HW_ERR_UNKNOWN_PKT 0x02
/** HCI transport pkt length exceeded */
#define CY_BLE_HW_ERR_LEN_EXCEEDED 0x03
/** HCI transport no cmd pkt buffer available */
#define CY_BLE_HW_ERR_CMD_NO_BUFFER 0X04
/** HCI transport no acl pkt buffer available */
#define CY_BLE_HW_ERR_ACL_NO_BUFFER 0X05
/** HCI transport no sync pkt buffer available */
#define CY_BLE_HW_ERR_SYNC_NO_BUFFER 0X06
/** HCI transport cmd pkt length exceeded */
#define CY_BLE_HW_ERR_CMD_LEN_EXCEEDED 0X07
/** HCI transport acl pkt length exceeded */
#define CY_BLE_HW_ERR_ACL_LEN_EXCEEDED 0X08
/** HCI transport sync pkt length exceeded */
#define CY_BLE_HW_ERR_SYNC_LEN_EXCEEDED 0X09
/** HCI transport wrong parameter for acl pkt */
#define CY_BLE_HW_ERR_WRNG_ACL_DATA_PARAM 0x0A
/** HCI transport wrong parameter for sync pkt */
#define CY_BLE_HW_ERR_WRNG_SYNC_DATA_PARAM 0X0B
/** HW init failure */
#define CY_BLE_HW_ERR_HW_INIT_FAILURE 0x0C
/** HCI_ERR_HW_PILO_CALIB_FAILURE PILO(LFCLK) Calibration failed */
#define CY_BLE_HW_ERR_PILO_CALIB_FAILURE 0x0D
#ifdef __cplusplus
}
#endif /* __cplusplus */
/** @} */
#endif /* CY_BLE_STACK_HOST_ERROR_H_ */