Skip to content
Permalink
bcafcf8fc3
Switch branches/tags

Name already in use

A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?

micropython/ports/psoc6/README.md

Go to file
 
 
Cannot retrieve contributors at this time
PSoC6 port Pre-requisites Building and running Linux version Run micropython
48 lines (24 sloc) 1.43 KB
Raw Blame

PSoC6 port

This port is intended to run on Infineon PSoC™ 6 microcontrollers.

Pre-requisites

The following port is using Infineon ModusToolbox™ to resolve the specific PSoC™ board resources and building flags. Before working with micropython:

  1. Install ModusToolbox. Minimum version required is 3.0.

  2. Run the following script from MicroPython repository root to add the required tools to the system PATH, and install the udev rules:

    source tools/psoc6/dev-setup.sh && toolchain_setup

If the ModusToolbox™ has not been installed in the default path (~/ModusToolbox), add the path as positional argument of the toolchain_setup function:

source tools/psoc6/dev-setup.sh && toolchain_setup [mtb_path]

Building and running Linux version

As we are working on the ports-psoc6-main branch (for now), first checkout that branch after cloning this repo:

git checkout --track origin/ports-psoc6-main

Then initialize the ModusToolbox™ environment:

make mtb_init BOARD=<board-name>

Retrieve submodules:

make submodules

Build the firmware:

make

To build and program the device:

make program

Find more information about the available makefile targets:

make help

Run micropython

Use any serial terminal (putty, minicom..) and establish a session with your device with 115200 bauds and 8-N-1 configuration.