Skip to content
Permalink
bcafcf8fc3
Switch branches/tags

Name already in use

A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?
Go to file
 
 
Cannot retrieve contributors at this time
146 lines (125 sloc) 4.02 KB
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2018-2021 Damien P. George
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include "uart.h"
extern uint32_t _estack, _sidata, _sdata, _edata, _sbss, _ebss;
__attribute__((naked)) void Reset_Handler(void) {
// set stack pointer
__asm volatile ("ldr r0, =_estack");
__asm volatile ("mov sp, r0");
// copy .data section from flash to RAM
for (uint32_t *src = &_sidata, *dest = &_sdata; dest < &_edata;) {
*dest++ = *src++;
}
// zero out .bss section
for (uint32_t *dest = &_sbss; dest < &_ebss;) {
*dest++ = 0;
}
// jump to board initialisation
void _start(void);
_start();
}
void Default_Handler(void) {
for (;;) {
}
}
#if defined(__ARM_ARCH_ISA_ARM)
// ARM architecture with standard ARM ISA.
__attribute__((naked, section(".isr_vector"))) void isr_vector(void) {
__asm volatile (
"b Reset_Handler\n"
"b Default_Handler\n"
"b Default_Handler\n"
"b Default_Handler\n"
"b Default_Handler\n"
"nop\n"
"b Default_Handler\n"
"b Default_Handler\n"
);
}
#elif defined(__ARM_ARCH_ISA_THUMB)
// ARM architecture with Thumb-only ISA.
const uint32_t isr_vector[] __attribute__((section(".isr_vector"))) = {
(uint32_t)&_estack,
(uint32_t)&Reset_Handler,
(uint32_t)&Default_Handler, // NMI_Handler
(uint32_t)&Default_Handler, // HardFault_Handler
(uint32_t)&Default_Handler, // MemManage_Handler
(uint32_t)&Default_Handler, // BusFault_Handler
(uint32_t)&Default_Handler, // UsageFault_Handler
0,
0,
0,
0,
(uint32_t)&Default_Handler, // SVC_Handler
(uint32_t)&Default_Handler, // DebugMon_Handler
0,
(uint32_t)&Default_Handler, // PendSV_Handler
(uint32_t)&Default_Handler, // SysTick_Handler
};
#endif
void _start(void) {
// Enable the UART
uart_init();
// Now that we have a basic system up and running we can call main
extern int main();
main(0, 0);
// Finished
exit(0);
}
__attribute__((naked)) void exit(int status) {
// Force qemu to exit using ARM Semihosting
__asm volatile (
"mov r1, r0\n"
"cmp r1, #0\n"
"bne .notclean\n"
"ldr r1, =0x20026\n" // ADP_Stopped_ApplicationExit, a clean exit
".notclean:\n"
"movs r0, #0x18\n" // SYS_EXIT
#if defined(__ARM_ARCH_ISA_ARM)
"svc 0x00123456\n"
#elif defined(__ARM_ARCH_ISA_THUMB)
"bkpt 0xab\n"
#endif
);
for (;;) {
}
}
#ifndef NDEBUG
void __assert_func(const char *file, int line, const char *func, const char *expr) {
(void)func;
printf("Assertion '%s' failed, at file %s:%d\n", expr, file, line);
exit(1);
}
#endif
// The following are needed for tinytest
#include <stdio.h>
int setvbuf(FILE *stream, char *buf, int mode, size_t size) {
return 0;
}
struct _reent *_impure_ptr;