Skip to content
Permalink
bcafcf8fc3
Switch branches/tags

Name already in use

A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?
Go to file
 
 
Cannot retrieve contributors at this time
106 lines (89 sloc) 4.06 KB
/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2020-2021 Damien P. George
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "py/mphal.h"
#include "py/runtime.h"
#include "drivers/dht/dht.h"
#include "modrp2.h"
#include "pico/stdlib.h"
#include "hardware/gpio.h"
#include "hardware/sync.h"
#include "hardware/structs/ioqspi.h"
#include "hardware/structs/sio.h"
#if MICROPY_PY_NETWORK_CYW43
#include "extmod/modnetwork.h"
#endif
#if MICROPY_PY_NETWORK_CYW43
MP_DECLARE_CONST_FUN_OBJ_VAR_BETWEEN(mod_network_country_obj);
#endif
// Improved version of
// https://github.com/raspberrypi/pico-examples/blob/master/picoboard/button/button.c
static bool __no_inline_not_in_flash_func(bootsel_button)(void) {
const uint CS_PIN_INDEX = 1;
// Disable interrupts and the other core since they might be
// executing code from flash and we are about to temporarily
// disable flash access.
mp_uint_t atomic_state = MICROPY_BEGIN_ATOMIC_SECTION();
// Set the CS pin to high impedance.
hw_write_masked(&ioqspi_hw->io[CS_PIN_INDEX].ctrl,
(GPIO_OVERRIDE_LOW << IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_LSB),
IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_BITS);
// Delay without calling any functions in flash.
uint32_t start = timer_hw->timerawl;
while ((uint32_t)(timer_hw->timerawl - start) <= MICROPY_HW_BOOTSEL_DELAY_US) {
;
}
// The HI GPIO registers in SIO can observe and control the 6 QSPI pins.
// The button pulls the QSPI_SS pin *low* when pressed.
bool button_state = !(sio_hw->gpio_hi_in & (1 << CS_PIN_INDEX));
// Restore the QSPI_SS pin so we can use flash again.
hw_write_masked(&ioqspi_hw->io[CS_PIN_INDEX].ctrl,
(GPIO_OVERRIDE_NORMAL << IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_LSB),
IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_BITS);
MICROPY_END_ATOMIC_SECTION(atomic_state);
return button_state;
}
static mp_obj_t rp2_bootsel_button(void) {
return MP_OBJ_NEW_SMALL_INT(bootsel_button());
}
MP_DEFINE_CONST_FUN_OBJ_0(rp2_bootsel_button_obj, rp2_bootsel_button);
static const mp_rom_map_elem_t rp2_module_globals_table[] = {
{ MP_ROM_QSTR(MP_QSTR___name__), MP_ROM_QSTR(MP_QSTR_rp2) },
{ MP_ROM_QSTR(MP_QSTR_Flash), MP_ROM_PTR(&rp2_flash_type) },
{ MP_ROM_QSTR(MP_QSTR_PIO), MP_ROM_PTR(&rp2_pio_type) },
{ MP_ROM_QSTR(MP_QSTR_StateMachine), MP_ROM_PTR(&rp2_state_machine_type) },
{ MP_ROM_QSTR(MP_QSTR_DMA), MP_ROM_PTR(&rp2_dma_type) },
{ MP_ROM_QSTR(MP_QSTR_bootsel_button), MP_ROM_PTR(&rp2_bootsel_button_obj) },
#if MICROPY_PY_NETWORK_CYW43
// Deprecated (use network.country instead).
{ MP_ROM_QSTR(MP_QSTR_country), MP_ROM_PTR(&mod_network_country_obj) },
#endif
};
static MP_DEFINE_CONST_DICT(rp2_module_globals, rp2_module_globals_table);
const mp_obj_module_t mp_module_rp2 = {
.base = { &mp_type_module },
.globals = (mp_obj_dict_t *)&rp2_module_globals,
};
MP_REGISTER_MODULE(MP_QSTR__rp2, mp_module_rp2);