Skip to content
Permalink
96a71fba8c
Switch branches/tags

Name already in use

A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?

mtb-example-btsdk-ble-hello-sensor/hello_sensor.h

Go to file
 
 
Cannot retrieve contributors at this time
186 lines (151 sloc) 8.01 KB
Raw Blame
/*
* Copyright 2016-2024, Cypress Semiconductor Corporation (an Infineon company) or
* an affiliate of Cypress Semiconductor Corporation. All rights reserved.
*
* This software, including source code, documentation and related
* materials ("Software") is owned by Cypress Semiconductor Corporation
* or one of its affiliates ("Cypress") and is protected by and subject to
* worldwide patent protection (United States and foreign),
* United States copyright laws and international treaty provisions.
* Therefore, you may use this Software only as provided in the license
* agreement accompanying the software package from which you
* obtained this Software ("EULA").
* If no EULA applies, Cypress hereby grants you a personal, non-exclusive,
* non-transferable license to copy, modify, and compile the Software
* source code solely for use in connection with Cypress's
* integrated circuit products. Any reproduction, modification, translation,
* compilation, or representation of this Software except as specified
* above is prohibited without the express written permission of Cypress.
*
* Disclaimer: THIS SOFTWARE IS PROVIDED AS-IS, WITH NO WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, NONINFRINGEMENT, IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress
* reserves the right to make changes to the Software without notice. Cypress
* does not assume any liability arising out of the application or use of the
* Software or any product or circuit described in the Software. Cypress does
* not authorize its products for use in any products where a malfunction or
* failure of the Cypress product may reasonably be expected to result in
* significant property damage, injury or death ("High Risk Product"). By
* including Cypress's product in a High Risk Product, the manufacturer
* of such system or application assumes all risk of such use and in doing
* so agrees to indemnify Cypress against all liability.
*/
/** @file
*
* LE Vendor Specific Device
*
* This file provides definitions and function prototypes for Hello Sensor
* device
*
*/
#ifndef _HELLO_SENSOR_H_
#define _HELLO_SENSOR_H_
#include "wiced_hal_nvram.h"
#if BTSTACK_VER >= 0x03000001
#include "wiced_memory.h"
#include "bt_types.h"
#define BT_STACK_HEAP_SIZE 1024 * 6
#define wiced_bt_gatt_send_notification(id, type, len, ptr) wiced_bt_gatt_server_send_notification(id, type, len, ptr, NULL)
#define wiced_bt_gatt_send_indication(id, type, len, ptr) wiced_bt_gatt_server_send_indication(id, type, len, ptr, NULL)
uint8_t *hello_sensor_alloc_buffer(uint16_t len);
void hello_sensor_free_buffer(uint8_t *p_data);
typedef void (*pfn_free_buffer_t)(uint8_t *);
#else // BTSTACK_VER
#include "wiced_gki.h"
#if !defined(CYW20835B1) && !defined(CYW20719B1) && !defined(CYW20721B1) && !defined(CYW20819A1) && !defined(CYW20719B2) && !defined(CYW20721B2) && !defined(CYW30739A0)
#include "wiced_bt_app_common.h"
#include "wiced_bt_app_hal_common.h"
#endif
extern const wiced_bt_cfg_buf_pool_t wiced_bt_cfg_buf_pools[];
#endif // BTSTACK_VER
extern const wiced_transport_cfg_t transport_cfg;
void hello_sensor_gatt_init();
extern const uint8_t hello_sensor_gatt_database[];
extern size_t hello_sensor_gatt_database_size;
#ifndef PACKED
#define PACKED
#endif
/******************************************************************************
* Constants
******************************************************************************/
#define HELLO_SENSOR_MAX_NUM_CLIENTS 1
/* Hello Sensor App Timer Timeout in seconds */
#define HELLO_SENSOR_APP_TIMEOUT_IN_SECONDS 1
/* Hello Sensor App Fine Timer Timeout in milli seconds */
#define HELLO_SENSOR_APP_FINE_TIMEOUT_IN_MS 1
/* Hello Sensor Connection Idle Timeout in milli seconds */
#define HELLO_SENSOR_CONN_IDLE_TIMEOUT_IN_SECONDS 3
#define HELLO_SENSOR_VS_ID WICED_NVRAM_VSID_START
#define HELLO_SENSOR_LOCAL_KEYS_VS_ID ( WICED_NVRAM_VSID_START + 1 )
#define HELLO_SENSOR_PAIRED_KEYS_VS_ID ( WICED_NVRAM_VSID_START + 2 )
#ifdef CYW20706A2
#define HELLO_SENSOR_GPIO_BUTTON_SETTINGS WICED_GPIO_BUTTON_SETTINGS( GPIO_EN_INT_RISING_EDGE )
#define HELLO_SENSOR_GPIO_BUTTON_PRESSED_VALUE WICED_GPIO_BUTTON_DEFAULT_STATE
#define HELLO_SENSOR_LED_GPIO platform_led[hello_sensor_led_pin].led_gpio
#endif
#if defined(CYW20835B1) || defined(CYW20719B1) || defined(CYW20719B2) || defined(CYW20721B1) || defined(CYW20721B2) || defined(CYW20819A1) || defined(CYW30739A0) || defined(CYW55572) || defined(CYW43022C1)
#define HELLO_SENSOR_LED_GPIO (uint32_t)*platform_led[hello_sensor_led_pin].gpio
#endif
/******************************************************************************
* Type Definitions
******************************************************************************/
typedef enum
{
HANDLE_HSENS_GATT_SERVICE = 0x1, // service handle
HANDLE_HSENS_GAP_SERVICE = 0x14, // service handle
HANDLE_HSENS_GAP_SERVICE_CHAR_DEV_NAME, // characteristic handl
HANDLE_HSENS_GAP_SERVICE_CHAR_DEV_NAME_VAL, // char value handle
HANDLE_HSENS_GAP_SERVICE_CHAR_DEV_APPEARANCE, // characteristic handl
HANDLE_HSENS_GAP_SERVICE_CHAR_DEV_APPEARANCE_VAL,// char value handle
HANDLE_HSENS_SERVICE = 0x28,
HANDLE_HSENS_SERVICE_CHAR_NOTIFY, // characteristic handl
HANDLE_HSENS_SERVICE_CHAR_NOTIFY_VAL, // char value handle
HANDLE_HSENS_SERVICE_CHAR_CFG_DESC, // charconfig desc handl
HANDLE_HSENS_SERVICE_CHAR_BLINK, // characteristic handl
HANDLE_HSENS_SERVICE_CHAR_BLINK_VAL, // char value handle
HANDLE_HSENS_SERVICE_CHAR_LONG_MSG, // characteristic handl
HANDLE_HSENS_SERVICE_CHAR_LONG_MSG_VAL, //long char value handl......
HANDLE_HSENS_DEV_INFO_SERVICE = 0x40,
HANDLE_HSENS_DEV_INFO_SERVICE_CHAR_MFR_NAME, // characteristic handle
HANDLE_HSENS_DEV_INFO_SERVICE_CHAR_MFR_NAME_VAL,// char value handle
HANDLE_HSENS_DEV_INFO_SERVICE_CHAR_MODEL_NUM, // characteristic handl
HANDLE_HSENS_DEV_INFO_SERVICE_CHAR_MODEL_NUM_VAL,// char value handle
HANDLE_HSENS_DEV_INFO_SERVICE_CHAR_SYSTEM_ID, // characteristic handl
HANDLE_HSENS_DEV_INFO_SERVICE_CHAR_SYSTEM_ID_VAL,// char value handle
HANDLE_HSENS_BATTERY_SERVICE = 0x60, // service handle
HANDLE_HSENS_BATTERY_SERVICE_CHAR_LEVEL, // characteristic handl
HANDLE_HSENS_BATTERY_SERVICE_CHAR_LEVEL_VAL, // char value andle
// Client Configuration
HDLD_CURRENT_TIME_SERVICE_CURRENT_TIME_CLIENT_CONFIGURATION,
}hello_sensor_db_tags;
/******************************************************************************
* Structures
******************************************************************************/
typedef struct
{
BD_ADDR remote_addr; // remote peer device address
uint32_t timer_count; // timer count
uint32_t fine_timer_count; // fine timer count
uint16_t conn_id; // connection ID referenced by the stack
uint16_t peer_mtu; // peer MTU
uint8_t num_to_write; // num msgs to send, incr on each button intr
uint8_t flag_indication_sent; // indicates waiting for ack/cfm
uint8_t flag_stay_connected; // stay connected or disconnect after all messages are sent
uint8_t battery_level; // dummy battery level
} hello_sensor_state_t;
#pragma pack(1)
/* Host information saved in NVRAM */
typedef PACKED struct
{
BD_ADDR bdaddr; /* BD address of the bonded host */
uint16_t characteristic_client_configuration; /* Current value of the client configuration descriptor */
uint8_t number_of_blinks; /* Sensor config, number of times to blink the LEd when button is pushed. */
} host_info_t;
#pragma pack()
typedef struct
{
uint16_t handle;
uint16_t attr_len;
void *p_attr;
} attribute_t;
#endif // _HELLO_SENSOR_H_