makefile

#
# Copyright 2016-2023, Cypress Semiconductor Corporation (an Infineon company) or
# an affiliate of Cypress Semiconductor Corporation.  All rights reserved.
#
# This software, including source code, documentation and related
# materials ("Software") is owned by Cypress Semiconductor Corporation
# or one of its affiliates ("Cypress") and is protected by and subject to
# worldwide patent protection (United States and foreign),
# United States copyright laws and international treaty provisions.
# Therefore, you may use this Software only as provided in the license
# agreement accompanying the software package from which you
# obtained this Software ("EULA").
# If no EULA applies, Cypress hereby grants you a personal, non-exclusive,
# non-transferable license to copy, modify, and compile the Software
# source code solely for use in connection with Cypress's
# integrated circuit products.  Any reproduction, modification, translation,
# compilation, or representation of this Software except as specified
# above is prohibited without the express written permission of Cypress.
#
# Disclaimer: THIS SOFTWARE IS PROVIDED AS-IS, WITH NO WARRANTY OF ANY KIND,
# EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, NONINFRINGEMENT, IMPLIED
# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress
# reserves the right to make changes to the Software without notice. Cypress
# does not assume any liability arising out of the application or use of the
# Software or any product or circuit described in the Software. Cypress does
# not authorize its products for use in any products where a malfunction or
# failure of the Cypress product may reasonably be expected to result in
# significant property damage, injury or death ("High Risk Product"). By
# including Cypress's product in a High Risk Product, the manufacturer
# of such system or application assumes all risk of such use and in doing
# so agrees to indemnify Cypress against all liability.
#

ifeq ($(WHICHFILE),true)
$(info Processing $(lastword $(MAKEFILE_LIST)))
endif

#
# Basic Configuration
#
APPNAME=BLE_HID_Mouse
TOOLCHAIN=GCC_ARM
CONFIG=Debug
VERBOSE=

# default target
TARGET=CYW920835M2EVB-01

SUPPORTED_TARGETS = \
  CYW920835M2EVB-01 \
  CYBLE-343072-EVAL-M2B \
  CYBLE-333074-EVAL-M2B

#  CYW955572BTEVK-01 \


#
# Advanced Configuration
#
SOURCES=
INCLUDES=
DEFINES=
VFP_SELECT=
CFLAGS=
CXXFLAGS=
ASFLAGS=
LDFLAGS=
LDLIBS=
LINKER_SCRIPT=
PREBUILD=
POSTBUILD=
FEATURES=

#
# Define basic library COMPONENTS
#
COMPONENTS += bsp_design_modus
COMPONENTS += hidd_lib2

#######################################################################################
# App compile flag defaults
#
# All flags can be defined in command line. When it is not defined, the following default value is used.
# Set to 1 to enable, 0 to disable.
#

####################################################
# To use ClientControl to control the device via HCI_UART port, TESTING_USING_HCI flag must be turned
TESTING_USING_HCI_DEFAULT=1

####################################################
# SLEEP_ALLOWED
#  SLEEP_ALLOWED=0  Disable sleep function
#  SLEEP_ALLOWED=1  Allow sleep without shutdown
#  SLEEP_ALLOWED=2  Allow sleep with shutdown
#
ifneq ($(filter CYW920835M2EVB-01 CYBLE-343072-EVAL-M2B CYBLE-333074-EVAL-M2B,$(TARGET)),)
 SLEEP_ALLOWED_DEFAULT=1
else
 SLEEP_ALLOWED_DEFAULT=2
endif

####################################################
# LED
#  LED=0  Disable LED functions (Good for power consumption measurement)
#  LED=1  Use LED for status indication
#
LED_SUPPORT_DEFAULT=1

####################################################
# Use OTA_FW_UPGRADE=1 to enable Over-the-air firmware upgrade functionality
# Use OTA_SEC_FW_UPGRADE=1 in the make target to use secure OTA procedure.
# OTA_SEC_FW_UPGRADE_DEFAULT takes effect only when OTA_FW_UPGRADE_DEFAULT=1
#
OTA_FW_UPGRADE_DEFAULT=0
OTA_SEC_FW_UPGRADE_DEFAULT=0

####################################################
# Link related flags

# Use LE_LOCAL_PRIVACY=1 to advertise with Resolvable Private Address (RPA)
LE_LOCAL_PRIVACY_DEFAULT=0

#######################################################################################
XIP?=xip
BT_DEVICE_ADDRESS?=default
UART?=AUTO
TESTING_USING_HCI ?= $(TESTING_USING_HCI_DEFAULT)
OTA_FW_UPGRADE ?= $(OTA_FW_UPGRADE_DEFAULT)
OTA_SEC_FW_UPGRADE ?= $(OTA_SEC_FW_UPGRADE_DEFAULT)
LE_LOCAL_PRIVACY ?= $(LE_LOCAL_PRIVACY_DEFAULT)
SLEEP_ALLOWED ?= $(SLEEP_ALLOWED_DEFAULT)
LED ?= $(LED_SUPPORT_DEFAULT)

#
# App defines
#
CY_APP_DEFINES = \
  -DBATTERY_REPORT_SUPPORT \
  -DMOUSE_REPORT_SUPPORT \
  -DBLE_SUPPORT \
  -DWICED_BT_TRACE_ENABLE \
  -DLED_SUPPORT=$(LED) \
  -DSLEEP_ALLOWED=$(SLEEP_ALLOWED)

ifneq ($(TARGET), CYW955572BTEVK-01)
CY_APP_PATCH_LIBS += wiced_hidd_lib.a
endif

ifeq ($(TARGET), CYW920820REF-MS-01)
 CY_APP_DEFINES += -DMOUSE_PLATFORM
 CY_APP_DEFINES += -DCLICK_USE_KEYSCAN
 CY_APP_DEFINES += -DUSE_COMBO_PAIRING
 CY_APP_DEFINES += -DMOTION_SUPPORT
 CY_APP_DEFINES += -DCLICK_SUPPORT
 CY_APP_DEFINES += -DSCROLL_SUPPORT
else
 CY_APP_DEFINES += -DMOTION_SUPPORT
 CY_APP_DEFINES += -DCLICK_SUPPORT
 CY_APP_DEFINES += -DCLICK_USE_BUTTON       #Use Buttons for click
 CY_APP_DEFINES += -DUSE_LSM9DS1
endif

ifeq ($(FASTPAIR_ENABLE),1)
 CY_APP_DEFINES += -DFASTPAIR_ENABLE -DFASTPAIR_ACCOUNT_KEY_NUM=5
 COMPONENTS += gfps_provider
endif

ifeq ($(hci_dump), 1)
 CY_APP_DEFINES += -DHCI_TRACES_ENABLED
else
 ifeq ($(TESTING_USING_HCI),1)
  CY_APP_DEFINES += -DTESTING_USING_HCI
  # key report is for Client Control test only
  CY_APP_DEFINES += -DKEY_REPORT_SUPPORT
 endif
endif

ifeq ($(BREDR),1)
 CY_APP_DEFINES += -DBR_EDR_SUPPORT
endif

ifeq ($(LE_LOCAL_PRIVACY),1)
 CY_APP_DEFINES += -DLE_LOCAL_PRIVACY_SUPPORT
endif

ifeq ($(OTA_FW_UPGRADE),1)
 # DEFINES
 CY_APP_DEFINES += -DOTA_FIRMWARE_UPGRADE
 CY_APP_DEFINES += -DDISABLED_PERIPHERAL_LATENCY_ONLY
 CY_APP_DEFINES += -DOTA_SKIP_CONN_PARAM_UPDATE
 ifeq ($(OTA_SEC_FW_UPGRADE), 1)
  CY_APP_DEFINES += -DOTA_SECURE_FIRMWARE_UPGRADE
 endif # OTA_SEC_FW_UPGRADE
 # COMPONENTS
 COMPONENTS += fw_upgrade_lib
else
 ifeq ($(OTA_SEC_FW_UPGRADE),1)
  $(error setting OTA_SEC_FW_UPGRADE=1 requires OTA_FW_UPGRADE also set to 1)
 endif # OTA_SEC_FW_UPGRADE
endif # OTA_FW_UPGRADE

################################################################################
# Paths
################################################################################

# Path (absolute or relative) to the project
CY_APP_PATH=.

# Relative path to the shared repo location.
#
# All .mtb files have the format, <URI><COMMIT><LOCATION>. If the <LOCATION> field
# begins with $$ASSET_REPO$$, then the repo is deposited in the path specified by
# the CY_GETLIBS_SHARED_PATH variable. The default location is one directory level
# above the current app directory.
# This is used with CY_GETLIBS_SHARED_NAME variable, which specifies the directory name.
CY_GETLIBS_SHARED_PATH=../

# Directory name of the shared repo location.
#
CY_GETLIBS_SHARED_NAME=mtb_shared

# Absolute path to the compiler (Default: GCC in the tools)
CY_COMPILER_PATH=

# Locate ModusToolbox IDE helper tools folders in default installation
# locations for Windows, Linux, and macOS.
CY_WIN_HOME=$(subst \,/,$(USERPROFILE))
CY_TOOLS_PATHS ?= $(wildcard \
    $(CY_WIN_HOME)/ModusToolbox/tools_* \
    $(HOME)/ModusToolbox/tools_* \
    /Applications/ModusToolbox/tools_* \
    $(CY_IDE_TOOLS_DIR))

# If you install ModusToolbox IDE in a custom location, add the path to its
# "tools_X.Y" folder (where X and Y are the version number of the tools
# folder).
CY_TOOLS_PATHS+=

# Default to the newest installed tools folder, or the users override (if it's
# found).
CY_TOOLS_DIR=$(lastword $(sort $(wildcard $(CY_TOOLS_PATHS))))

ifeq ($(CY_TOOLS_DIR),)
$(error Unable to find any of the available CY_TOOLS_PATHS -- $(CY_TOOLS_PATHS))
endif

# tools that can be launched with "make open CY_OPEN_TYPE=<tool>
CY_BT_APP_TOOLS=BTSpy ClientControl

-include internal.mk
ifeq ($(filter $(TARGET),$(SUPPORTED_TARGETS)),)
$(error TARGET $(TARGET) not supported for this application. Edit SUPPORTED_TARGETS in the code example makefile to add new BSPs)
endif
include $(CY_TOOLS_DIR)/make/start.mk