Skip to content
Permalink
a36bd831cb
Switch branches/tags

Name already in use

A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?

mtb-example-btsdk-mesh-snip-onoff-server/mesh_onoff_server.c

Go to file
 
 
Cannot retrieve contributors at this time
497 lines (455 sloc) 27.1 KB
Raw Blame
/*
* Copyright 2016-2023, Cypress Semiconductor Corporation (an Infineon company) or
* an affiliate of Cypress Semiconductor Corporation. All rights reserved.
*
* This software, including source code, documentation and related
* materials ("Software") is owned by Cypress Semiconductor Corporation
* or one of its affiliates ("Cypress") and is protected by and subject to
* worldwide patent protection (United States and foreign),
* United States copyright laws and international treaty provisions.
* Therefore, you may use this Software only as provided in the license
* agreement accompanying the software package from which you
* obtained this Software ("EULA").
* If no EULA applies, Cypress hereby grants you a personal, non-exclusive,
* non-transferable license to copy, modify, and compile the Software
* source code solely for use in connection with Cypress's
* integrated circuit products. Any reproduction, modification, translation,
* compilation, or representation of this Software except as specified
* above is prohibited without the express written permission of Cypress.
*
* Disclaimer: THIS SOFTWARE IS PROVIDED AS-IS, WITH NO WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, NONINFRINGEMENT, IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress
* reserves the right to make changes to the Software without notice. Cypress
* does not assume any liability arising out of the application or use of the
* Software or any product or circuit described in the Software. Cypress does
* not authorize its products for use in any products where a malfunction or
* failure of the Cypress product may reasonably be expected to result in
* significant property damage, injury or death ("High Risk Product"). By
* including Cypress's product in a High Risk Product, the manufacturer
* of such system or application assumes all risk of such use and in doing
* so agrees to indemnify Cypress against all liability.
*/
/** @file
*
*
* This file shows how to create a device which implements onoff server.
*/
#include "wiced_bt_ble.h"
#include "wiced_bt_gatt.h"
#include "wiced_bt_mesh_models.h"
#ifdef MESH_DFU_SUPPORTED
#include "wiced_bt_mesh_dfu.h"
#endif
#include "wiced_bt_trace.h"
#include "wiced_bt_mesh_app.h"
#if ( defined(DIRECTED_FORWARDING_SERVER_SUPPORTED) || defined(NETWORK_FILTER_SERVER_SUPPORTED))
#include "wiced_bt_mesh_mdf.h"
#endif
#ifdef LARGE_COMPOSITION_DATA_SUPPORTED
#include "wiced_bt_mesh_lcd.h"
#include "wiced_bt_mesh_dfu.h"
#endif
#ifdef PRIVATE_PROXY_SUPPORTED
#include "wiced_bt_mesh_private_proxy.h"
#endif
#ifdef OPCODES_AGGREGATOR_SUPPORTED
#include "wiced_bt_mesh_agg.h"
#endif
#ifdef HCI_CONTROL
#include "wiced_transport.h"
#include "hci_control_api.h"
#endif
#include "wiced_bt_cfg.h"
extern wiced_bt_cfg_settings_t wiced_bt_cfg_settings;
#define NUM_ONOFF_SERVERS 1
#define TRANSITION_INTERVAL 100 // receive status notifications every 100ms during transition to new state
// Needed to pass some PTS tests which require vendor model
//#define MESH_VENDOR_TST_COMPANY_ID 0x131
//#define MESH_VENDOR_TST_MODEL_ID 1
/******************************************************
* Constants
******************************************************/
#define MESH_PID 0x3016
#define MESH_VID 0x0002
// Definitions for parameters of the wiced_bt_mesh_directed_forwarding_init():
#define MESH_DIRECTED_FORWARDING_DIRECTED_PROXY_SUPPORTED WICED_TRUE // WICED_TRUE if directed proxy is supported.
#define MESH_DIRECTED_FORWARDING_DIRECTED_FRIEND_SUPPORTED WICED_TRUE // WICED_TRUE if directed friend is supported.
#define MESH_DIRECTED_FORWARDING_DEFAULT_RSSI_THRESHOLD -120 // The value of the default_rssi_threshold is implementation specificand should be 10 dB above the receiver sensitivity.
#define MESH_DIRECTED_FORWARDING_MAX_DT_ENTRIES_CNT 2 // The maximum number of Discovery Table entries supported by the node in a given subnet.It shall be >= 2.
#define MESH_DIRECTED_FORWARDING_NODE_PATHS 20 // The minimum number of paths that the node supports when acting as a Path Origin or as a Path Target.It shall be >= 20.
#define MESH_DIRECTED_FORWARDING_RELAY_PATHS 20 // The minimum number of paths that the node supports when acting as an intermediate Directed Relay node.It shall be >= 20.
#define MESH_DIRECTED_FORWARDING_PROXY_PATHS 20 // The minimum number of paths that the node supports when acting as a Directed Proxy node. If directed proxy is supported, it shall be >= 20; otherwise it shall be 0.
#define MESH_DIRECTED_FORWARDING_FRIEND_PATHS 20 // The minimum number of paths that the node supports when acting as a Directed Friend node.
/******************************************************
* Structures
******************************************************/
typedef struct
{
uint8_t present_state;
uint8_t target_state;
} mesh_onoff_server_t;
/******************************************************
* Function Prototypes
******************************************************/
static void mesh_app_init(wiced_bool_t is_provisioned);
static uint32_t mesh_app_proc_rx_cmd(uint16_t opcode, uint8_t *p_data, uint32_t length);
static void mesh_onoff_server_message_handler(uint8_t element_idx, uint16_t event, void *p_data);
static void mesh_onoff_server_send_state_change(uint8_t element_idx, uint8_t onoff);
static void mesh_onoff_server_process_status(uint8_t element_idx, wiced_bt_mesh_onoff_status_data_t *p_data);
#ifdef HCI_CONTROL
static void mesh_onoff_hci_event_send_status(uint8_t element_idx, wiced_bt_mesh_onoff_status_data_t* p_data);
#endif
/******************************************************
* Variables Definitions
******************************************************/
uint8_t mesh_mfr_name[WICED_BT_MESH_PROPERTY_LEN_DEVICE_MANUFACTURER_NAME] = { 'C', 'y', 'p', 'r', 'e', 's', 's', 0 };
uint8_t mesh_model_num[WICED_BT_MESH_PROPERTY_LEN_DEVICE_MODEL_NUMBER] = { '1', '2', '3', '4', 0, 0, 0, 0 };
uint8_t mesh_system_id[8] = { 0xbb, 0xb8, 0xa1, 0x80, 0x5f, 0x9f, 0x91, 0x71 };
wiced_bt_mesh_core_config_model_t mesh_element1_models[] =
{
WICED_BT_MESH_DEVICE,
#ifdef LARGE_COMPOSITION_DATA_SUPPORTED
WICED_BT_MESH_MODEL_LARGE_COMPOS_DATA_SERVER,
#endif
#ifdef PRIVATE_PROXY_SUPPORTED
WICED_BT_MESH_MODEL_PRIVATE_PROXY_SERVER,
#endif
#ifdef DIRECTED_FORWARDING_SERVER_SUPPORTED
WICED_BT_MESH_DIRECTED_FORWARDING_SERVER,
#endif
#ifdef NETWORK_FILTER_SERVER_SUPPORTED
WICED_BT_MESH_NETWORK_FILTER_SERVER,
#endif
#ifdef REMOTE_PROVISION_SERVER_SUPPORTED
WICED_BT_MESH_MODEL_REMOTE_PROVISION_SERVER,
#endif
#ifdef OPCODES_AGGREGATOR_SUPPORTED
WICED_BT_MESH_MODEL_OPCODES_AGGREGATOR_SERVER,
#endif
#ifdef MESH_DFU_SUPPORTED
WICED_BT_MESH_MODEL_FW_DISTRIBUTOR_UPDATE_SERVER,
#endif
WICED_BT_MESH_MODEL_ONOFF_SERVER,
#ifdef MESH_VENDOR_TST_MODEL_ID
{ MESH_VENDOR_TST_COMPANY_ID, MESH_VENDOR_TST_MODEL_ID, NULL, NULL, NULL },
#endif
};
#if NUM_ONOFF_SERVERS > 1
wiced_bt_mesh_core_config_model_t mesh_element2_models[] =
{
WICED_BT_MESH_MODEL_ONOFF_SERVER,
};
#endif
#if NUM_ONOFF_SERVERS > 2
wiced_bt_mesh_core_config_model_t mesh_element3_models[] =
{
WICED_BT_MESH_MODEL_ONOFF_SERVER,
};
#endif
#if NUM_ONOFF_SERVERS > 3
wiced_bt_mesh_core_config_model_t mesh_element4_models[] =
{
WICED_BT_MESH_MODEL_ONOFF_SERVER,
};
#endif
#ifdef LARGE_COMPOSITION_DATA_SUPPORTED
wiced_bt_mesh_core_config_model_t mesh_element_x_models[] =
{
WICED_BT_MESH_MODEL_LIGHT_HSL_CTL_XYL_SERVER,
WICED_BT_MESH_MODEL_FW_DISTRIBUTOR_UPDATE_SERVER,
};
#define WICED_BT_MESH_LIGHT_XYL_ELEMENT \
{ \
.location = MESH_ELEM_LOC_MAIN, \
.default_transition_time = MESH_DEFAULT_TRANSITION_TIME_IN_MS, \
.onpowerup_state = WICED_BT_MESH_ON_POWER_UP_STATE_RESTORE, \
.default_level = 1, \
.range_min = 1, \
.range_max = 0xffff, \
.move_rollover = 0, \
.properties_num = 0, \
.properties = NULL, \
.sensors_num = 0, \
.sensors = NULL, \
.models_num = (sizeof(mesh_element_x_models) / sizeof(wiced_bt_mesh_core_config_model_t)), \
.models = mesh_element_x_models \
}
#endif
#define MESH_ONOFF_SERVER_ELEMENT_INDEX 0
wiced_bt_mesh_core_config_element_t mesh_elements[] =
{
{
.location = MESH_ELEM_LOC_MAIN, // location description as defined in the GATT Bluetooth Namespace Descriptors section of the Bluetooth SIG Assigned Numbers
.default_transition_time = MESH_DEFAULT_TRANSITION_TIME_IN_MS, // Default transition time for models of the element in milliseconds
.onpowerup_state = WICED_BT_MESH_ON_POWER_UP_STATE_RESTORE, // Default element behavior on power up
.default_level = 0, // Default value of the variable controlled on this element (for example power, lightness, temperature, hue...)
.range_min = 1, // Minimum value of the variable controlled on this element (for example power, lightness, temperature, hue...)
.range_max = 0xffff, // Maximum value of the variable controlled on this element (for example power, lightness, temperature, hue...)
.move_rollover = 0, // If true when level gets to range_max during move operation, it switches to min, otherwise move stops.
.properties_num = 0, // Number of properties in the array models
.properties = NULL, // Array of properties in the element.
.sensors_num = 0, // Number of sensors in the sensor array
.sensors = NULL, // Array of sensors of that element
.models_num = (sizeof(mesh_element1_models) / sizeof(wiced_bt_mesh_core_config_model_t)), // Number of models in the array models
.models = mesh_element1_models, // Array of models located in that element. Model data is defined by structure wiced_bt_mesh_core_config_model_t
},
#if NUM_ONOFF_SERVERS > 1
{
.location = MESH_ELEM_LOC_MAIN, // location description as defined in the GATT Bluetooth Namespace Descriptors section of the Bluetooth SIG Assigned Numbers
.default_transition_time = MESH_DEFAULT_TRANSITION_TIME_IN_MS, // Default transition time for models of the element in milliseconds
.onpowerup_state = WICED_BT_MESH_ON_POWER_UP_STATE_RESTORE, // Default element behavior on power up
.default_level = 0, // Default value of the variable controlled on this element (for example power, lightness, temperature, hue...)
.range_min = 1, // Minimum value of the variable controlled on this element (for example power, lightness, temperature, hue...)
.range_max = 0xffff, // Maximum value of the variable controlled on this element (for example power, lightness, temperature, hue...)
.move_rollover = 0, // If true when level gets to range_max during move operation, it switches to min, otherwise move stops.
.properties_num = 0, // Number of properties in the array models
.properties = NULL, // Array of properties in the element.
.sensors_num = 0, // Number of sensors in the sensor array
.sensors = NULL, // Array of sensors of that element
.models_num = (sizeof(mesh_element2_models) / sizeof(wiced_bt_mesh_core_config_model_t)), // Number of models in the array models
.models = mesh_element2_models, // Array of models located in that element. Model data is defined by structure wiced_bt_mesh_core_config_model_t
},
#endif
#if NUM_ONOFF_SERVERS > 2
{
.location = MESH_ELEM_LOC_MAIN, // location description as defined in the GATT Bluetooth Namespace Descriptors section of the Bluetooth SIG Assigned Numbers
.default_transition_time = MESH_DEFAULT_TRANSITION_TIME_IN_MS, // Default transition time for models of the element in milliseconds
.onpowerup_state = WICED_BT_MESH_ON_POWER_UP_STATE_RESTORE, // Default element behavior on power up
.default_level = 0, // Default value of the variable controlled on this element (for example power, lightness, temperature, hue...)
.range_min = 1, // Minimum value of the variable controlled on this element (for example power, lightness, temperature, hue...)
.range_max = 0xffff, // Maximum value of the variable controlled on this element (for example power, lightness, temperature, hue...)
.move_rollover = 0, // If true when level gets to range_max during move operation, it switches to min, otherwise move stops.
.properties_num = 0, // Number of properties in the array models
.properties = NULL, // Array of properties in the element.
.sensors_num = 0, // Number of sensors in the sensor array
.sensors = NULL, // Array of sensors of that element
.models_num = (sizeof(mesh_element3_models) / sizeof(wiced_bt_mesh_core_config_model_t)), // Number of models in the array models
.models = mesh_element3_models, // Array of models located in that element. Model data is defined by structure wiced_bt_mesh_core_config_model_t
},
#endif
#if NUM_ONOFF_SERVERS > 3
{
.location = MESH_ELEM_LOC_MAIN, // location description as defined in the GATT Bluetooth Namespace Descriptors section of the Bluetooth SIG Assigned Numbers
.default_transition_time = MESH_DEFAULT_TRANSITION_TIME_IN_MS, // Default transition time for models of the element in milliseconds
.onpowerup_state = WICED_BT_MESH_ON_POWER_UP_STATE_RESTORE, // Default element behavior on power up
.default_level = 0, // Default value of the variable controlled on this element (for example power, lightness, temperature, hue...)
.range_min = 1, // Minimum value of the variable controlled on this element (for example power, lightness, temperature, hue...)
.range_max = 0xffff, // Maximum value of the variable controlled on this element (for example power, lightness, temperature, hue...)
.move_rollover = 0, // If true when level gets to range_max during move operation, it switches to min, otherwise move stops.
.properties_num = 0, // Number of properties in the array models
.properties = NULL, // Array of properties in the element.
.sensors_num = 0, // Number of sensors in the sensor array
.sensors = NULL, // Array of sensors of that element
.models_num = (sizeof(mesh_element4_models) / sizeof(wiced_bt_mesh_core_config_model_t)), // Number of models in the array models
.models = mesh_element4_models, // Array of models located in that element. Model data is defined by structure wiced_bt_mesh_core_config_model_t
},
#endif
#ifdef LARGE_COMPOSITION_DATA_SUPPORTED
// Add enough elements to create a large composition data
// Note: total element number should not be more than 10
WICED_BT_MESH_LIGHT_XYL_ELEMENT, \
WICED_BT_MESH_LIGHT_XYL_ELEMENT, \
WICED_BT_MESH_LIGHT_XYL_ELEMENT, \
WICED_BT_MESH_LIGHT_XYL_ELEMENT, \
WICED_BT_MESH_LIGHT_XYL_ELEMENT, \
WICED_BT_MESH_LIGHT_XYL_ELEMENT, \
WICED_BT_MESH_LIGHT_XYL_ELEMENT, \
WICED_BT_MESH_LIGHT_XYL_ELEMENT, \
WICED_BT_MESH_LIGHT_XYL_ELEMENT,
#endif
};
wiced_bt_mesh_core_config_t mesh_config =
{
.company_id = MESH_COMPANY_ID_CYPRESS, // Company identifier assigned by the Bluetooth SIG
.product_id = MESH_PID, // Vendor-assigned product identifier
.vendor_id = MESH_VID, // Vendor-assigned product version identifier
#if defined(LOW_POWER_NODE) && (LOW_POWER_NODE == 1)
.features = WICED_BT_MESH_CORE_FEATURE_BIT_LOW_POWER, // A bit field indicating the device features. In Low Power mode no Relay, no Proxy and no Friend
.friend_cfg = // Empty Configuration of the Friend Feature
{
.receive_window = 0, // Receive Window value in milliseconds supported by the Friend node.
.cache_buf_len = 0, // Length of the buffer for the cache
.max_lpn_num = 0 // Max number of Low Power Nodes with established friendship. Must be > 0 if Friend feature is supported.
},
.low_power = // Configuration of the Low Power Feature
{
.rssi_factor = 2, // contribution of the RSSI measured by the Friend node used in Friend Offer Delay calculations.
.receive_window_factor = 2, // contribution of the supported Receive Window used in Friend Offer Delay calculations.
.min_cache_size_log = 3, // minimum number of messages that the Friend node can store in its Friend Cache.
.receive_delay = 100, // Receive delay in 1 ms units to be requested by the Low Power node.
.poll_timeout = 200 // Poll timeout in 100ms units to be requested by the Low Power node.
},
#else
.features = WICED_BT_MESH_CORE_FEATURE_BIT_FRIEND | WICED_BT_MESH_CORE_FEATURE_BIT_RELAY | WICED_BT_MESH_CORE_FEATURE_BIT_GATT_PROXY_SERVER, // Supports Friend, Relay and GATT Proxy
.friend_cfg = // Configuration of the Friend Feature(Receive Window in Ms, messages cache)
{
.receive_window = 20,
.cache_buf_len = 300, // Length of the buffer for the cache
.max_lpn_num = 4 // Max number of Low Power Nodes with established friendship. Must be > 0 if Friend feature is supported.
},
.low_power = // Configuration of the Low Power Feature
{
.rssi_factor = 0, // contribution of the RSSI measured by the Friend node used in Friend Offer Delay calculations.
.receive_window_factor = 0, // contribution of the supported Receive Window used in Friend Offer Delay calculations.
.min_cache_size_log = 0, // minimum number of messages that the Friend node can store in its Friend Cache.
.receive_delay = 0, // Receive delay in 1 ms units to be requested by the Low Power node.
.poll_timeout = 0 // Poll timeout in 100ms units to be requested by the Low Power node.
},
#endif
.gatt_client_only = WICED_FALSE, // Can connect to mesh over GATT or ADV
.elements_num = (uint8_t)(sizeof(mesh_elements) / sizeof(mesh_elements[0])), // number of elements on this device
.elements = mesh_elements // Array of elements for this device
};
/*
* Mesh application library will call into application functions if provided by the application.
*/
wiced_bt_mesh_app_func_table_t wiced_bt_mesh_app_func_table =
{
mesh_app_init, // application initialization
NULL, // Default SDK platform button processing
NULL, // GATT connection status
NULL, // attention processing
NULL, // notify period set
mesh_app_proc_rx_cmd, // WICED HCI command
NULL, // LPN sleep
NULL // factory reset
};
// Application state
mesh_onoff_server_t app_state;
/******************************************************
* Function Definitions
******************************************************/
void mesh_app_init(wiced_bool_t is_provisioned)
{
#if 0
// Set Debug trace level for mesh_models_lib and mesh_provisioner_lib
wiced_bt_mesh_models_set_trace_level(WICED_BT_MESH_CORE_TRACE_INFO);
#endif
#if 0
// Set Debug trace level for all modules but Info level for CORE_AES_CCM module
wiced_bt_mesh_core_set_trace_level(WICED_BT_MESH_CORE_TRACE_FID_ALL, WICED_BT_MESH_CORE_TRACE_DEBUG);
wiced_bt_mesh_core_set_trace_level(WICED_BT_MESH_CORE_TRACE_FID_CORE_AES_CCM, WICED_BT_MESH_CORE_TRACE_INFO);
#endif
wiced_bt_cfg_settings.device_name = (uint8_t *)"OnOff Server";
wiced_bt_cfg_settings.gatt_cfg.appearance = APPEARANCE_GENERIC_TAG;
// Adv Data is fixed. Spec allows to put URI, Name, Appearance and Tx Power in the Scan Response Data.
if (!is_provisioned)
{
wiced_bt_ble_advert_elem_t adv_elem[3];
uint8_t buf[2];
uint8_t num_elem = 0;
adv_elem[num_elem].advert_type = BTM_BLE_ADVERT_TYPE_NAME_COMPLETE;
adv_elem[num_elem].len = (uint16_t)strlen((const char*)wiced_bt_cfg_settings.device_name);
adv_elem[num_elem].p_data = wiced_bt_cfg_settings.device_name;
num_elem++;
adv_elem[num_elem].advert_type = BTM_BLE_ADVERT_TYPE_APPEARANCE;
adv_elem[num_elem].len = 2;
buf[0] = (uint8_t)wiced_bt_cfg_settings.gatt_cfg.appearance;
buf[1] = (uint8_t)(wiced_bt_cfg_settings.gatt_cfg.appearance >> 8);
adv_elem[num_elem].p_data = buf;
num_elem++;
wiced_bt_mesh_set_raw_scan_response_data(num_elem, adv_elem);
}
#ifdef DIRECTED_FORWARDING_SERVER_SUPPORTED
wiced_bt_mesh_directed_forwarding_init(
MESH_DIRECTED_FORWARDING_DIRECTED_PROXY_SUPPORTED,
MESH_DIRECTED_FORWARDING_DIRECTED_FRIEND_SUPPORTED,
MESH_DIRECTED_FORWARDING_DEFAULT_RSSI_THRESHOLD,
MESH_DIRECTED_FORWARDING_MAX_DT_ENTRIES_CNT,
MESH_DIRECTED_FORWARDING_NODE_PATHS,
MESH_DIRECTED_FORWARDING_RELAY_PATHS,
MESH_DIRECTED_FORWARDING_PROXY_PATHS,
MESH_DIRECTED_FORWARDING_FRIEND_PATHS);
#endif
#ifdef NETWORK_FILTER_SERVER_SUPPORTED
if (is_provisioned)
wiced_bt_mesh_network_filter_init();
#endif
memset (&app_state, 0, sizeof(app_state));
#if REMOTE_PROVISION_SERVER_SUPPORTED
wiced_bt_mesh_remote_provisioning_server_init();
#endif
wiced_bt_mesh_model_onoff_server_init(MESH_ONOFF_SERVER_ELEMENT_INDEX, mesh_onoff_server_message_handler, TRANSITION_INTERVAL, is_provisioned);
#ifdef MESH_DFU_SUPPORTED
wiced_bt_mesh_model_fw_distribution_server_init();
#endif
#if NUM_ONOFF_SERVERS > 1
wiced_bt_mesh_model_onoff_server_init(1, mesh_onoff_server_message_handler, TRANSITION_INTERVAL, is_provisioned);
#endif
#if NUM_ONOFF_SERVERS > 2
wiced_bt_mesh_model_onoff_server_init(2, mesh_onoff_server_message_handler, TRANSITION_INTERVAL, is_provisioned);
#endif
#if NUM_ONOFF_SERVERS > 3
wiced_bt_mesh_model_onoff_server_init(3, mesh_onoff_server_message_handler, TRANSITION_INTERVAL, is_provisioned);
#endif
}
/*
* Process event received from the OnOff Client.
*/
void mesh_onoff_server_message_handler(uint8_t element_idx, uint16_t event, void *p_data)
{
switch (event)
{
case WICED_BT_MESH_ONOFF_STATUS:
mesh_onoff_server_process_status(element_idx, (wiced_bt_mesh_onoff_status_data_t *)p_data);
break;
default:
WICED_BT_TRACE("unknown\n");
}
}
/*
* In 2 chip solutions MCU can send a command that On/Off state has changed.
*/
uint32_t mesh_app_proc_rx_cmd(uint16_t opcode, uint8_t *p_data, uint32_t length)
{
uint8_t element_idx;
WICED_BT_TRACE("onoff rx cmd_opcode 0x%02x\n", opcode);
switch (opcode)
{
#ifdef HCI_CONTROL
case HCI_CONTROL_MESH_COMMAND_ONOFF_SET:
element_idx = wiced_bt_mesh_get_element_idx_from_wiced_hci(&p_data, &length);
mesh_onoff_server_send_state_change(element_idx, *p_data);
break;
#endif
default:
WICED_BT_TRACE("unknown\n");
return WICED_FALSE;
}
return WICED_TRUE;
}
/*
* This function is called when command to change state is received over mesh.
*/
void mesh_onoff_server_process_status(uint8_t element_idx, wiced_bt_mesh_onoff_status_data_t *p_status)
{
WICED_BT_TRACE("onoff srv set onoff: present:%d target:%d remaining:%d\n", p_status->present_onoff, p_status->target_onoff, p_status->remaining_time);
#if defined HCI_CONTROL
mesh_onoff_hci_event_send_status(element_idx, p_status);
#endif
}
/*
* This function shall be called when On/Off state has been changed locally
*/
void mesh_onoff_server_send_state_change(uint8_t element_idx, uint8_t onoff)
{
wiced_bt_mesh_model_onoff_changed(element_idx, onoff);
}
#ifdef HCI_CONTROL
/*
* Send OnOff Status event over transport
*/
void mesh_onoff_hci_event_send_status(uint8_t element_idx, wiced_bt_mesh_onoff_status_data_t *p_data)
{
wiced_bt_mesh_hci_event_t *p_hci_event = wiced_bt_mesh_alloc_hci_event(element_idx);
if (p_hci_event)
{
uint8_t *p = p_hci_event->data;
UINT8_TO_STREAM(p, p_data->present_onoff);
UINT8_TO_STREAM(p, p_data->target_onoff);
UINT32_TO_STREAM(p, p_data->remaining_time);
mesh_transport_send_data(HCI_CONTROL_MESH_EVENT_ONOFF_STATUS, (uint8_t *)p_hci_event, (uint16_t)(p - (uint8_t *)p_hci_event));
}
}
#endif