PSOC™ Control MCU: CORDIC

This code example demonstrates the use of the coordinate rotation digital computer (CORDIC) peripheral using Peripheral Driver Library (PDL) functions. By using this code example, the basic functions provided by the CORDIC peripheral can be evaluated through the UART terminal.

View this README on GitHub.

Provide feedback on this code example.

Requirements

ModusToolbox™ v3.3 or later (tested with v3.3)
Board support package (BSP) minimum required version: 1.0.3
Programming language: C
Associated parts: All PSOC™ Control C3 MCUs

Supported toolchains (make variable 'TOOLCHAIN')

GNU Arm® Embedded Compiler v11.3.1 (GCC_ARM) – Default value of TOOLCHAIN
Arm® Compiler v6.22 (ARM)
IAR C/C++ Compiler v9.50.2 (IAR)

Supported kits (make variable 'TARGET')

PSOC™ Control C3M5 Evaluation Kit (KIT_PSC3M5_EVK) – Default value of TARGET

Hardware setup

This example uses the board's default configuration. See the kit user guide to ensure that the board is configured correctly.

To verify the output, PSOC™ Control C3M5 Evaluation Kit KIT_PSC3M5_EVK is required.

MiniProg4 connection: Connect the USB cable provided along with the kit to the USB port of the evaluation kit (EVK).
- Program and debug interface: Use the onboard debug interface through the connected USB cable.
- UART interface for serial COM port: Use the UART connected to the onboard debug interface.

Software setup

See the ModusToolbox™ tools package installation guide for information about installing and configuring the tools package.

Install a terminal emulator if you don't have one. Instructions in this document use PuTTY.

Note: Use PuTTY terminal emulator for accuracy of the values.

Using the code example

Create the project

The ModusToolbox™ tools package provides the Project Creator as both a GUI tool and a command line tool.

Use Project Creator GUI

Open the Project Creator GUI tool.

There are several ways to do this, including launching it from the dashboard or from inside the Eclipse IDE. For more details, see the Project Creator user guide (locally available at {ModusToolbox™ install directory}/tools_{version}/project-creator/docs/project-creator.pdf).
On the Choose Board Support Package (BSP) page, select a kit supported by this code example. See Supported kits.

Note: To use this code example for a kit not listed here, you may need to update the source files. If the kit does not have the required resources, the application may not work.
On the Select Application page:

a. Select the Applications(s) Root Path and the Target IDE.

Note: Depending on how you open the Project Creator tool, these fields may be pre-selected for you.

b. Select this code example from the list by enabling its check box.

Note: You can narrow the list of displayed examples by typing in the filter box.

c. (Optional) Change the suggested New Application Name and New BSP Name.

d. Click Create to complete the application creation process.

Use Project Creator CLI

The 'project-creator-cli' tool can be used to create applications from a CLI terminal or from within batch files or shell scripts. This tool is available in the {ModusToolbox™ install directory}/tools_{version}/project-creator/ directory.

Use a CLI terminal to invoke the 'project-creator-cli' tool. On Windows, use the command-line 'modus-shell' program provided in the ModusToolbox™ installation instead of a standard Windows command-line application. This shell provides access to all ModusToolbox™ tools. You can access it by typing "modus-shell" in the search box in the Windows menu. In Linux and macOS, you can use any terminal application.

The following example clones the "PSOC™ Control MCU: CORDIC" application with the desired name "CORDIC" configured for the KIT_PSC3M5_EVK BSP into the specified working directory, C:/mtb_projects:

project-creator-cli --board-id KIT_PSC3M5_EVK --app-id mtb-example-ce239627-cordic --user-app-name CORDIC --target-dir "C:/mtb_projects"

The 'project-creator-cli' tool has the following arguments:

Argument	Description	Required/optional
`--board-id`	Defined in the field of the BSP manifest	Required
`--app-id`	Defined in the field of the CE manifest	Required
`--target-dir`	Specify the directory in which the application is to be created if you prefer not to use the default current working directory	Optional
`--user-app-name`	Specify the name of the application if you prefer to have a name other than the example's default name	Optional

Note: The project-creator-cli tool uses the git clone and make getlibs commands to fetch the repository and import the required libraries. For details, see the "Project creator tools" section of the ModusToolbox™ tools package user guide (locally available at {ModusToolbox™ install directory}/docs_{version}/mtb_user_guide.pdf).

Open the project

After the project has been created, you can open it in your preferred development environment.

Eclipse IDE

If you opened the Project Creator tool from the included Eclipse IDE, the project will open in Eclipse automatically.

For more details, see the Eclipse IDE for ModusToolbox™ user guide (locally available at {ModusToolbox™ install directory}/docs_{version}/mt_ide_user_guide.pdf).

Visual Studio (VS) Code

Launch VS Code manually, and then open the generated {project-name}.code-workspace file located in the project directory.

For more details, see the Visual Studio Code for ModusToolbox™ user guide (locally available at {ModusToolbox™ install directory}/docs_{version}/mt_vscode_user_guide.pdf).

Keil µVision

Double-click the generated {project-name}.cprj file to launch the Keil µVision IDE.

For more details, see the Keil µVision for ModusToolbox™ user guide (locally available at {ModusToolbox™ install directory}/docs_{version}/mt_uvision_user_guide.pdf).

IAR Embedded Workbench

Open IAR Embedded Workbench manually, and create a new project. Then select the generated {project-name}.ipcf file located in the project directory.

For more details, see the IAR Embedded Workbench for ModusToolbox™ user guide (locally available at {ModusToolbox™ install directory}/docs_{version}/mt_iar_user_guide.pdf).

Command line

If you prefer to use the CLI, open the appropriate terminal, and navigate to the project directory. On Windows, use the command-line 'modus-shell' program; on Linux and macOS, you can use any terminal application. From there, you can run various make commands.

For more details, see the ModusToolbox™ tools package user guide (locally available at {ModusToolbox™ install directory}/docs_{version}/mtb_user_guide.pdf).

Operation

Connect the board to your PC using the provided USB cable through the KitProg3 USB connector.
Open a terminal program and select the KitProg3 COM port. Set the serial port parameters to 8N1 and 115200 baud.
Program the board using one of the following:
Using Eclipse IDE
1. Select the application project in the Project Explorer.
2. In the Quick Panel, scroll down, and click <Application Name> Program (KitProg3_MiniProg4).
In other IDEs

Follow the instructions in your preferred IDE.
Using CLI

From the terminal, execute the make program command to build and program the application using the default toolchain to the default target. The default toolchain is specified in the application's Makefile but you can override this value manually:
```
make program TOOLCHAIN=<toolchain>
```
Example:
```
make program TOOLCHAIN=GCC_ARM
```
After programming, the application starts automatically. Confirm that the UART terminal displays the following.

Figure 1. Terminal output on program startup
Then start entering input according to the commands in the menu.

Debugging

You can debug the example to step through the code.

In Eclipse IDE

Use the <Application Name> Debug (KitProg3_MiniProg4) configuration in the Quick Panel. For details, see the "Program and debug" section in the Eclipse IDE for ModusToolbox™ user guide.

In other IDEs

Follow the instructions in your preferred IDE.

Design and implementation

This code example enables you to test the CORDIC peripheral by executing different mathematic operations that can be performed with it.

A debug UART is configured to communicate with the firmware. The code example will print the list of operations that can be tested using the code example through the UART. You can select the required operations by entering the number assigned to each operation.

Once the operation is selected, the code example will ask for the required data. After you enter the data, the code example performs the operation by using the CORDIC PDL APIs. The operation that is being performed by the CORDIC will also be performed by the Arm® Cortex®-M33 CPU by using the software library. After completing the operations, the results from both CORDIC and math library will be displayed on the UART terminal.

Resources and settings

Table 2. Application resources

Resource	Alias/object	Purpose
UART (PDL)	DEBUG_UART	UART used by Retarget-IO as the Debug UART port
CORDIC (PDL)	-	CORDIC peripheral for performing the operations

Related resources

Resources	Links
Application notes	AN238329 – Getting started with PSOC™ Control C3 MCU on ModusToolbox™ software
Code examples	Using ModusToolbox™ on GitHub
Device documentation	PSOC™ Control C3 MCU datasheet PSOC™ Control C3 technical reference manuals
Development kits	Select your kits from the Evaluation board finder.
Libraries on GitHub	mtb-pdl-cat1 – Peripheral Driver Library (PDL) mtb-hal-psc3 – Hardware Abstraction Layer (HAL) library retarget-io – Utility library to retarget STDIO messages to a UART port
Tools	ModusToolbox™ – ModusToolbox™ software is a collection of easy-to-use libraries and tools enabling rapid development with Infineon MCUs for applications ranging from wireless and cloud-connected systems, edge AI/ML, embedded sense and control, to wired USB connectivity using PSOC™ Industrial/IoT MCUs, AIROC™ Wi-Fi and Bluetooth® connectivity devices, XMC™ Industrial MCUs, and EZ-USB™/EZ-PD™ wired connectivity controllers. ModusToolbox™ incorporates a comprehensive set of BSPs, HAL, libraries, configuration tools, and provides support for industry-standard IDEs to fast-track your embedded application development.

Other resources

Infineon provides a wealth of data at www.infineon.com to help you select the right device, and quickly and effectively integrate it into your design.

Document history

Document title: CE239627 – PSOC™ Control MCU: CORDIC

Version	Description of change
1.0.0	New code example

All referenced product or service names and trademarks are the property of their respective owners.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Infineon is under license.

© Cypress Semiconductor Corporation, 2024. This document is the property of Cypress Semiconductor Corporation, an Infineon Technologies company, and its affiliates ("Cypress"). This document, including any software or firmware included or referenced in this document ("Software"), is owned by Cypress under the intellectual property laws and treaties of the United States and other countries worldwide. Cypress reserves all rights under such laws and treaties and does not, except as specifically stated in this paragraph, grant any license under its patents, copyrights, trademarks, or other intellectual property rights. If the Software is not accompanied by a license agreement and you do not otherwise have a written agreement with Cypress governing the use of the Software, then Cypress hereby grants you a personal, non-exclusive, nontransferable license (without the right to sublicense) (1) under its copyright rights in the Software (a) for Software provided in source code form, to modify and reproduce the Software solely for use with Cypress hardware products, only internally within your organization, and (b) to distribute the Software in binary code form externally to end users (either directly or indirectly through resellers and distributors), solely for use on Cypress hardware product units, and (2) under those claims of Cypress's patents that are infringed by the Software (as provided by Cypress, unmodified) to make, use, distribute, and import the Software solely for use with Cypress hardware products. Any other use, reproduction, modification, translation, or compilation of the Software is prohibited.
TO THE EXTENT PERMITTED BY APPLICABLE LAW, CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS DOCUMENT OR ANY SOFTWARE OR ACCOMPANYING HARDWARE, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. No computing device can be absolutely secure. Therefore, despite security measures implemented in Cypress hardware or software products, Cypress shall have no liability arising out of any security breach, such as unauthorized access to or use of a Cypress product. CYPRESS DOES NOT REPRESENT, WARRANT, OR GUARANTEE THAT CYPRESS PRODUCTS, OR SYSTEMS CREATED USING CYPRESS PRODUCTS, WILL BE FREE FROM CORRUPTION, ATTACK, VIRUSES, INTERFERENCE, HACKING, DATA LOSS OR THEFT, OR OTHER SECURITY INTRUSION (collectively, "Security Breach"). Cypress disclaims any liability relating to any Security Breach, and you shall and hereby do release Cypress from any claim, damage, or other liability arising from any Security Breach. In addition, the products described in these materials may contain design defects or errors known as errata which may cause the product to deviate from published specifications. To the extent permitted by applicable law, Cypress reserves the right to make changes to this document without further notice. Cypress does not assume any liability arising out of the application or use of any product or circuit described in this document. Any information provided in this document, including any sample design information or programming code, is provided only for reference purposes. It is the responsibility of the user of this document to properly design, program, and test the functionality and safety of any application made of this information and any resulting product. "High-Risk Device" means any device or system whose failure could cause personal injury, death, or property damage. Examples of High-Risk Devices are weapons, nuclear installations, surgical implants, and other medical devices. "Critical Component" means any component of a High-Risk Device whose failure to perform can be reasonably expected to cause, directly or indirectly, the failure of the High-Risk Device, or to affect its safety or effectiveness. Cypress is not liable, in whole or in part, and you shall and hereby do release Cypress from any claim, damage, or other liability arising from any use of a Cypress product as a Critical Component in a High-Risk Device. You shall indemnify and hold Cypress, including its affiliates, and its directors, officers, employees, agents, distributors, and assigns harmless from and against all claims, costs, damages, and expenses, arising out of any claim, including claims for product liability, personal injury or death, or property damage arising from any use of a Cypress product as a Critical Component in a High-Risk Device. Cypress products are not intended or authorized for use as a Critical Component in any High-Risk Device except to the limited extent that (i) Cypress's published data sheet for the product explicitly states Cypress has qualified the product for use in a specific High-Risk Device, or (ii) Cypress has given you advance written authorization to use the product as a Critical Component in the specific High-Risk Device and you have signed a separate indemnification agreement.
Cypress, the Cypress logo, and combinations thereof, ModusToolbox, PSoC, CAPSENSE, EZ-USB, F-RAM, and TRAVEO are trademarks or registered trademarks of Cypress or a subsidiary of Cypress in the United States or in other countries. For a more complete list of Cypress trademarks, visit www.infineon.com. Other names and brands may be claimed as property of their respective owners.

License

Infineon/mtb-example-ce239627-cordic

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages