PSOC™ 6 MCU: XENSIV™ microphone audio shield stereo

This code example demonstrates the usage of Infineon's XENSIV™ Audio Shield to connect up to two analog or digital microphones to a PC via USB. It is designed to evaluate the performance of XENSIV™ MEMS microphones in array applications and serves as a foundation for audio processing use cases. Host systems can use the device as a stereo channel audio input for development in environments, such as MATLAB®, Python, and others.

It offers a reference implementation for audio data acquisition, processing, and USB streaming using I2S and DMA, facilitating rapid prototyping and extension for advanced audio applications. The project is intended for research, prototyping, and product development in embedded audio and acoustics.

View this README on GitHub.

Provide feedback on this code example.

Requirements

ModusToolbox™ v3.5 or later (tested with v3.5)
Board support package (BSP) minimum required version: 4.0.0
Programming language: C
XENSIV™ Audio Shield
Two analog or two digital Infineon's XENSIV™ MEMS microphones on flex, such as:
- KIT-IM72D128V01-FLEX
- KIT-IM73A135V01-FLEX
Two Micro USB cables
Additional 12v DC Power supply(if required)
Audio software such as Audacity, Python, MATLAB®, or others
Associated parts: All PSOC™ 6 MCU parts

Supported toolchains (make variable 'TOOLCHAIN')

GNU Arm® Embedded Compiler v11.3.1 (GCC_ARM) – Default value of TOOLCHAIN
Arm® Compiler v6.22 (ARM)
IAR C/C++ Compiler v9.50.2 (IAR)

Supported kits (make variable 'TARGET')

PSOC™ 62S2 Evaluation Kit (CY8CEVAL-062S2) – Default value of TARGET
PSOC™ 62S2 Wi-Fi Bluetooth® Pioneer Kit (CY8CKIT-062S2-43012)

Features

USB Audio Class 2.0 compliant, supporting stereo channel microphone data at 48 kHz and 24-bit resolution
Compatible with Audacity and WASAPI for multi-channel recording
Efficient use of DMA to offload CPU, enabling real-time algorithms on PSOC™ 6 MCU
Modular firmware structure for easy extension and integration

Hardware setup

XENSIV™ Audio Shield with PSOC™ 62S2 Evaluation Kit

The XENSIV™ PSOC™ 62S2 Evaluation Kit enables you to evaluate and develop your applications using the PSOC™ 62 series MCU (hereafter called “PSOC™ 6 MCU”) and connectivity modules based on AIROC™ Wi-Fi & Bluetooth® combo chip.

PSOC™ 62S2 Evaluation Kit (CY8CEVAL-062S2)

Figure 1. PSOC™ 62S2 Evaluation Kit
XENSIV™ Audio Shield

Figure 2. Audio Shield
XENSIV™ Audio Shield + PSOC™ 62S2 Evaluation Kit

Figure 3. Audio Shield + PSOC™ 62S2 Evaluation Kit

Set up the kit:

Connect two XENSIV™ MEMS microphones to XENSIV™ Audio Shield
Ensure that XENSIV™ Audio Shield is mounted on the top of the CY8CEVAL-062S2 kit through the pin headers
Connect the PSOC™ 62S2 Evaluation Kit to your PC using two Micro USB cables to power the MCU and shield:
- Connect the first cable to the MCU USB port
- Connect the second cable to the KitProg USB port
Press the XRES reset pin

XENSIV™ Audio Shield with PSOC™ 62S2 Wi-Fi Bluetooth® Pioneer Kit (CY8CKIT-062S2-43012)

The XENSIV™ PSOC™ 62S2 Wi-Fi Bluetooth® Pioneer Kit (CY8CEVAL-062S2-43012) enables you to evaluate and develop your applications using the PSOC™ 6 MCU and AIROC™CYW43012 Wi-Fi & Bluetooth® combo device

PSOC™ 62S2 Wi-Fi Bluetooth® Pioneer Kit CY8CEVAL-062S2-43012(https://github.com/Infineon/TARGET_CY8CKIT-062S2-43012)

Figure 4. Evaluation Kit PSOC™ 62S2 Wi-Fi Bluetooth® Pioneer Kit
XENSIV™ Audio Shield

Figure 5. XENSIV™ Audio Shield
XENSIV™ Audio Shield + PSOC™ 62S2 Wi-Fi Bluetooth® Pioneer Kit

Figure 6. XENSIV™ Audio Shield + PSOC™ 62S2 Wi-Fi Bluetooth® Pioneer Kit

Set up the kit:

Connect two XENSIV™ MEMS microphones to XENSIV™ Audio Shield
Ensure that XENSIV™ Audio Shield is mounted on the top of the CY8CEVAL-062S2-43012 kit through the pin headers
Connect the PSOC™ 62S2 Evaluation Kit to your PC using two micro USB cables to power the MCU and shield:
- Connect the first cable to the MCU USB port
- Connect the second cable to the KitProg USB port
Press the XRES reset pin

Note:

When connecting the Audio Shield to the evaluation kit, follow this connection sequence to prevent power issues:
a. Connect the MCU USB (or Device USB) and then connect the KitProg USB
b. Press the XRES button to reset the board and ensure the power LED is on

At times it was also seen that the power supplied from the USB port is not sufficient to power both evaluation board and shield.In that case please use the additional DC Power supply as follows
a. First connect the evaluation kit using the kitprog USB and program the kit (once programmed please remove the kitprog USB).
b. Then, connect the DC power supply to the J5 jack on the evaluation board.
c. Connect the USB cable to the "MCU USB" port.

The PSOC™ 6 Bluetooth® LE Pioneer Kit (CY8CKIT-062-BLE) and the PSOC™ 6 Wi-Fi Bluetooth® Pioneer Kit (CY8CKIT-062-WIFI-BT) ship with KitProg2 installed. ModusToolbox™ requires KitProg3. Before using this code example, make sure that the board is upgraded to KitProg3. The tool and instructions are available in the Firmware Loader GitHub repository. If you do not upgrade, you will see an error like "unable to find CMSIS-DAP device" or "KitProg firmware is out of date"

Software setup

See the ModusToolbox™ tools package installation guide for information about installing and configuring the tools package.

Install software for recording audio through USB. For instance, this code example uses Audacity and follows the High-quality audio recording in Windows with Audiohub Nano document.

This example requires no additional software or tools.

Using the code example

Create the project

The ModusToolbox™ tools package provides the Project Creator as both a GUI tool and a command line tool.

Use Project Creator GUI

Open the Project Creator GUI tool

There are several ways to do this, including launching it from the dashboard or from inside the Eclipse IDE. For more details, see the Project Creator user guide (locally available at {ModusToolbox™ install directory}/tools_{version}/project-creator/docs/project-creator.pdf)
On the Choose Board Support Package (BSP) page, select a kit supported by this code example. See Supported kits

Note: To use this code example for a kit not listed here, you may need to update the source files. If the kit does not have the required resources, the application may not work
On the Select Application page:

a. Select the Applications(s) Root Path and the Target IDE

Note: Depending on how you open the Project Creator tool, these fields may be pre-selected for you

b. Select this code example from the list by enabling its check box

Note: You can narrow the list of displayed examples by typing in the filter box

c. (Optional) Change the suggested New Application Name and New BSP Name

d. Click Create to complete the application creation process

Use Project Creator CLI

The 'project-creator-cli' tool can be used to create applications from a CLI terminal or from within batch files or shell scripts. This tool is available in the {ModusToolbox™ install directory}/tools_{version}/project-creator/ directory.

Use a CLI terminal to invoke the 'project-creator-cli' tool. On Windows, use the command-line 'modus-shell' program provided in the ModusToolbox™ installation instead of a standard Windows command-line application. This shell provides access to all ModusToolbox™ tools. You can access it by typing "modus-shell" in the search box in the Windows menu. In Linux and macOS, you can use any terminal application.

The following example clones the "Audio Shield two-channel microphone" application with the desired name "2ChannelMic" configured for the CY8CEVAL-062S2 BSP into the specified working directory, C:/mtb_projects:

project-creator-cli --board-id CY8CEVAL-062S2 --app-id mtb-mtb-example-ce242117-xensiv-microphone-audioshield-stereo --user-app-name 2ChannelMic--target-dir "C:/mtb_projects"

The 'project-creator-cli' tool has the following arguments:

Argument	Description	Required/optional
`--board-id`	Defined in the field of the BSP manifest	Required
`--app-id`	Defined in the field of the CE manifest	Required
`--target-dir`	Specify the directory in which the application is to be created if you prefer not to use the default current working directory	Optional
`--user-app-name`	Specify the name of the application if you prefer to have a name other than the example's default name	Optional

Note: The project-creator-cli tool uses the git clone and make getlibs commands to fetch the repository and import the required libraries. For details, see the "Project creator tools" section of the ModusToolbox™ tools package user guide (locally available at {ModusToolbox™ install directory}/docs_{version}/mtb_user_guide.pdf).

Open the project

After the project has been created, you can open it in your preferred development environment.

Eclipse IDE

If you opened the Project Creator tool from the included Eclipse IDE, the project will open in Eclipse automatically.

For more details, see the Eclipse IDE for ModusToolbox™ user guide (locally available at {ModusToolbox™ install directory}/docs_{version}/mt_ide_user_guide.pdf).

Visual Studio (VS) Code

Launch VS Code manually, and then open the generated {project-name}.code-workspace file located in the project directory.

For more details, see the Visual Studio Code for ModusToolbox™ user guide (locally available at {ModusToolbox™ install directory}/docs_{version}/mt_vscode_user_guide.pdf).

Arm® Keil® µVision®

Double-click the generated {project-name}.cprj file to launch the Keil® µVision® IDE.

For more details, see the Arm® Keil® µVision® for ModusToolbox™ user guide (locally available at {ModusToolbox™ install directory}/docs_{version}/mt_uvision_user_guide.pdf).

IAR Embedded Workbench

Open IAR Embedded Workbench manually, and create a new project. Then select the generated {project-name}.ipcf file located in the project directory.

For more details, see the IAR Embedded Workbench for ModusToolbox™ user guide (locally available at {ModusToolbox™ install directory}/docs_{version}/mt_iar_user_guide.pdf).

Command line

If you prefer to use the CLI, open the appropriate terminal, and navigate to the project directory. On Windows, use the command-line 'modus-shell' program; on Linux and macOS, you can use any terminal application. From there, you can run various make commands.

For more details, see the ModusToolbox™ tools package user guide (locally available at {ModusToolbox™ install directory}/docs_{version}/mtb_user_guide.pdf).

Operation

XENSIV™Microphone Audio Shield Stereo

Open the Makefile
Select the microphone type (digital or analog):
- DEFINES+=DIGITAL_BOARD for two digital microphones
- DEFINES+=ANALOG_BOARD for two analog microphones
- DEFINES+=ENABLE_HEADPHONES to enable headphone output
Save the file and close
Program the board using one of the following:
Using Eclipse IDE
1. Select the application project in the Project Explorer
2. In the Quick Panel, scroll down, and click <Application Name> Program (KitProg3_MiniProg4)
In other IDEs

Follow the instructions in your preferred IDE.
Using CLI

From the terminal, execute the make program command to build and program the application using the default toolchain to the default target. The default toolchain is specified in the application's Makefile but you can override this value manually:
```
make program TOOLCHAIN=<toolchain>
```
Example:
```
make program TOOLCHAIN=GCC_ARM
```
Open any audio recorder or editor. For instance, you can either use any Python scripts or software such as Audacity. For testing this code example, Audacity is used. Use the High-quality audio recording in Windows with Audiohub Nano document to get more insights on how to use the software

Note:
a. For testing we have used Audacity 3.7.5
b. Kindly note the actual device name will be different to what has been shown in the application note.The actual name of the shield is XENSIV Audioshield and will be displayed in audicity as follows

Figure 7. Audacity

To achieve low latency and high sample frequencies in Audacity, it is recommended to use drivers, such as WASAPI or ASIO. When selecting WASAPI, ensure to set up all four available channels to optimize your audio setup and take full advantage of the driver's capabilities

Design and implementation

Details

This project is organized into modular components:

periph_i2s.c: Configures and manages I2S peripherals and DMA for audio data transfer
usb_audio.c: Implements the USB audio endpoints and streaming logic
audioShield.c: Initializes the XENSIV™ Audio Shield via I2C and supports additional hardware features
rtos: Coordinates real-time tasks and event handling
usb_comm.c: Handles general USB requests and device enumeration
main.c: Initializes the board, creates RTOS tasks, and starts the scheduler
Makefile: Selects voltage and codec settings for digital or analog microphones

For further details, see the Audio Shield user guide and mtb-example-ce242117-xensiv-microphone-audioshield-stereo > doc > dataflow_draft.pptx.

USB audio flow

Microphones are connected via codec and I2S bus to PSOC™ 6 MCU
I2S is handled via PSOC™ I2S Rx peripheral and triggers DMA to copy data from the I2S Rx FIFO into the software buffer
If no active USB audio recording is running, the microphone data is forwarded to headphones via the I2S Tx peripheral
I2S Rx and Tx share the same clock
This is USB Audio 2 compliant
Headphone audio data frame is processed within ISR
See comments in src > periph_i2s.c file for an overview of interleaved audio data alignment
For further processing, it is recommended to reduce the ISR load and move data processing into a dedicated RTOS task

System overview

Figure 7. System overview

USB audio data flow

Figure 8. USB audio data flow

Related resources

Resources	Links
Application notes	AN228571 – Getting started with PSOC™ 6 MCU on ModusToolbox™ AN215656 – PSOC™ 6 MCU: Dual-CPU system design AN091404 – High-quality audio recording in Windows with Audiohub Nano
User guide	UG095149 – Audiohub Nano Digital
Code examples	Using ModusToolbox™ on GitHub
Device documentation	PSOC™ 6 MCU datasheets PSOC™ 6 technical reference manuals
Development kits	Select your kits from the Evaluation board finder
Libraries on GitHub	mtb-pdl-cat1 – PSOC™ 6 Peripheral Driver Library (PDL) mtb-hal-cat1 – Hardware Abstraction Layer (HAL) library retarget-io – Utility library to retarget STDIO messages to a UART port
Middleware on GitHub	psoc6-middleware – Links to all PSOC™ 6 MCU middleware
Tools	ModusToolbox™ – ModusToolbox™ software is a collection of easy-to-use libraries and tools enabling rapid development with Infineon MCUs for applications ranging from wireless and cloud-connected systems, edge AI/ML, embedded sense and control, to wired USB connectivity using PSOC™ Industrial/IoT MCUs, AIROC™ Wi-Fi and Bluetooth® connectivity devices, XMC™ Industrial MCUs, and EZ-USB™/EZ-PD™ wired connectivity controllers. ModusToolbox™ incorporates a comprehensive set of BSPs, HAL, libraries, configuration tools, and provides support for industry-standard IDEs to fast-track your embedded application development

Other resources

Infineon provides a wealth of data at www.infineon.com to help you select the right device, and quickly and effectively integrate it into your design.

For more information about connected sensor kits, see IoT sensor platform.

Document history

Document title: CE241889 – PSOC™ 6 MCU: XENSIV™ microphone audio shield stereo

Version	Description of change
1.0.0	New code example

All referenced product or service names and trademarks are the property of their respective owners.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Infineon is under license.

PSOC™, formerly known as PSoC™, is a trademark of Infineon Technologies. Any references to PSoC™ in this document or others shall be deemed to refer to PSOC™.

© Cypress Semiconductor Corporation, 2025. This document is the property of Cypress Semiconductor Corporation, an Infineon Technologies company, and its affiliates ("Cypress"). This document, including any software or firmware included or referenced in this document ("Software"), is owned by Cypress under the intellectual property laws and treaties of the United States and other countries worldwide. Cypress reserves all rights under such laws and treaties and does not, except as specifically stated in this paragraph, grant any license under its patents, copyrights, trademarks, or other intellectual property rights. If the Software is not accompanied by a license agreement and you do not otherwise have a written agreement with Cypress governing the use of the Software, then Cypress hereby grants you a personal, non-exclusive, nontransferable license (without the right to sublicense) (1) under its copyright rights in the Software (a) for Software provided in source code form, to modify and reproduce the Software solely for use with Cypress hardware products, only internally within your organization, and (b) to distribute the Software in binary code form externally to end users (either directly or indirectly through resellers and distributors), solely for use on Cypress hardware product units, and (2) under those claims of Cypress's patents that are infringed by the Software (as provided by Cypress, unmodified) to make, use, distribute, and import the Software solely for use with Cypress hardware products. Any other use, reproduction, modification, translation, or compilation of the Software is prohibited.
TO THE EXTENT PERMITTED BY APPLICABLE LAW, CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS DOCUMENT OR ANY SOFTWARE OR ACCOMPANYING HARDWARE, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. No computing device can be absolutely secure. Therefore, despite security measures implemented in Cypress hardware or software products, Cypress shall have no liability arising out of any security breach, such as unauthorized access to or use of a Cypress product. CYPRESS DOES NOT REPRESENT, WARRANT, OR GUARANTEE THAT CYPRESS PRODUCTS, OR SYSTEMS CREATED USING CYPRESS PRODUCTS, WILL BE FREE FROM CORRUPTION, ATTACK, VIRUSES, INTERFERENCE, HACKING, DATA LOSS OR THEFT, OR OTHER SECURITY INTRUSION (collectively, "Security Breach"). Cypress disclaims any liability relating to any Security Breach, and you shall and hereby do release Cypress from any claim, damage, or other liability arising from any Security Breach. In addition, the products described in these materials may contain design defects or errors known as errata which may cause the product to deviate from published specifications. To the extent permitted by applicable law, Cypress reserves the right to make changes to this document without further notice. Cypress does not assume any liability arising out of the application or use of any product or circuit described in this document. Any information provided in this document, including any sample design information or programming code, is provided only for reference purposes. It is the responsibility of the user of this document to properly design, program, and test the functionality and safety of any application made of this information and any resulting product. "High-Risk Device" means any device or system whose failure could cause personal injury, death, or property damage. Examples of High-Risk Devices are weapons, nuclear installations, surgical implants, and other medical devices. "Critical Component" means any component of a High-Risk Device whose failure to perform can be reasonably expected to cause, directly or indirectly, the failure of the High-Risk Device, or to affect its safety or effectiveness. Cypress is not liable, in whole or in part, and you shall and hereby do release Cypress from any claim, damage, or other liability arising from any use of a Cypress product as a Critical Component in a High-Risk Device. You shall indemnify and hold Cypress, including its affiliates, and its directors, officers, employees, agents, distributors, and assigns harmless from and against all claims, costs, damages, and expenses, arising out of any claim, including claims for product liability, personal injury or death, or property damage arising from any use of a Cypress product as a Critical Component in a High-Risk Device. Cypress products are not intended or authorized for use as a Critical Component in any High-Risk Device except to the limited extent that (i) Cypress's published data sheet for the product explicitly states Cypress has qualified the product for use in a specific High-Risk Device, or (ii) Cypress has given you advance written authorization to use the product as a Critical Component in the specific High-Risk Device and you have signed a separate indemnification agreement.
Cypress, the Cypress logo, and combinations thereof, ModusToolbox, PSoC, CAPSENSE, EZ-USB, F-RAM, and TRAVEO are trademarks or registered trademarks of Cypress or a subsidiary of Cypress in the United States or in other countries. For a more complete list of Cypress trademarks, visit www.infineon.com. Other names and brands may be claimed as property of their respective owners.

License

Infineon/mtb-example-ce242117-xensiv-microphone-audioshield-stereo

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages