README.md

# XMC™ MCU: CCU8 PWM complementary

This code example demonstrates generating two complementary pulse width modulated (PWM) waves using the Capture and Compare Unit 8 (CCU8 module) available in XMC™ MCU.

One CCU8 slice is configured to generate complementary PWM signals in the project. This example also shows how dead-time insertion is done between generated PWM signals.

## Requirements

- [ModusToolbox™ software](https://www.infineon.com/products/modustoolbox-software-environment) v3.0
- [SEGGER J-Link software](https://www.segger.com/downloads/jlink/#J-LinkSoftwareAndDocumentationPack)
- Programming language: C
- Associated parts: All [XMC4000 MCU](https://www.infineon.com/cms/en/product/microcontroller/32-bit-industrial-microcontroller-based-on-arm-cortex-m/32-bit-xmc4000-industrial-microcontroller-arm-cortex-m4/) parts

## Supported toolchains (make variable 'TOOLCHAIN')

- GNU Arm® embedded compiler v10.3.1 (`GCC_ARM`) - Default value of `TOOLCHAIN`

## Supported kits (make variable 'TARGET')

- [XMC1300 boot kit](https://www.infineon.com/cms/en/product/evaluation-boards/kit_xmc13_boot_001/) (`KIT_XMC13_BOOT_001`)
- [XMC1400 boot kit](https://www.infineon.com/cms/en/product/evaluation-boards/kit_xmc14_boot_001/) (`KIT_XMC14_BOOT_001`) - Default
 value of `TARGET`
- [XMC4200 Platform2Go kit](https://www.infineon.com/cms/en/product/evaluation-boards/kit_xmc_plt2go_xmc4200/) (`KIT_XMC_PLT2GO_XMC4
200`)
- [XMC4300 relax EtherCAT kit](https://www.infineon.com/cms/en/product/evaluation-boards/kit_xmc43_relax_ecat_v1/) (`KIT_XMC43_RELAX
_ECAT_V1`)
- [XMC4400 Platform2Go kit](https://www.infineon.com/cms/en/product/evaluation-boards/kit_xmc_plt2go_xmc4400/) (`KIT_XMC_PLT2GO_XMC4
400`)
- [XMC4500 relax kit](https://www.infineon.com/cms/en/product/evaluation-boards/kit_xmc45_relax_v1/) (`KIT_XMC45_RELAX_V1`)
- [XMC4700 relax kit](https://www.infineon.com/cms/en/product/evaluation-boards/kit_xmc47_relax_v1/) (`KIT_XMC47_RELAX_V1`)
- [XMC4800 relax EtherCAT kit](https://www.infineon.com/cms/en/product/evaluation-boards/kit_xmc48_relax_ecat_v1/) (`KIT_XMC48_RELAX_ECAT_V1`)

## Hardware setup

This example uses the board's default configuration. See the kit user guide to ensure that the board is configured correctly.

## Software setup

This example requires no additional software or tools.

## Using the code example

Create the project and open it using one of the following:

<details open><summary><b>In Eclipse IDE for ModusToolbox&trade; software</b></summary>

1. Click the **New Application** link in the **Quick Panel** (or, use **File** > **New** > **ModusToolbox Application**). This launches the [Project Creator](https://www.infineon.com/ModusToolboxProjectCreator) tool.

2. Pick a kit supported by the code example from the list shown in the **Project Creator - Choose Board Support Package (BSP)** dialog.

   When you select a supported kit, the example is reconfigured automatically to work with the kit. To work with a different supported kit later, use the [Library Manager](https://www.infineon.com/ModusToolboxLibraryManager) to choose the BSP for the supported kit. You can use the Library Manager to select or update the BSP and firmware libraries used in this application. To access the Library Manager, click the link from the **Quick Panel**.

   You can also just start the application creation process again and select a different kit.

   If you want to use the application for a kit not listed here, you may need to update the source files. If the kit does not have the required resources, the application may not work.

3. In the **Project Creator - Select Application** dialog, choose the example by enabling the checkbox.

4. (Optional) Change the suggested **New Application Name**.

5. The **Application(s) Root Path** defaults to the Eclipse workspace which is usually the desired location for the application. If you want to store the application in a different location, you can change the *Application(s) Root Path* value. Applications that share libraries should be in the same root path.

6. Click **Create** to complete the application creation process.

For more details, see the [Eclipse IDE for ModusToolbox&trade; software user guide](https://www.infineon.com/MTBEclipseIDEUserGuide) (locally available at *{ModusToolbox&trade; software install directory}/ide_{version}/docs/mt_ide_user_guide.pdf*).

</details>

<details open><summary><b>In command-line interface (CLI)</b></summary>

ModusToolbox&trade; software provides the Project Creator as both a GUI tool and the command-line tool, "project-creator-cli". The CLI tool can be used to create applications from a CLI terminal or from within batch files or shell scripts. This tool is available in the *{ModusToolbox&trade; software install directory}/tools_{version}/project-creator/* directory.

Use a CLI terminal to invoke the "project-creator-cli" tool. On Windows, use the command line "modus-shell" program provided in the ModusToolbox&trade; software installation instead of a standard Windows command-line application. This shell provides access to all ModusToolbox&trade; software tools. You can access it by typing `modus-shell` in the search box in the Windows menu. In Linux and macOS, you can use any terminal application.

This tool has the following arguments:

Argument | Description | Required/optional
---------|-------------|------------------
`--board-id` | Defined in the `<id>` field of the [BSP](https://github.com/Infineon?q=bsp-manifest&type=&language=&sort=) manifest | Required
`--app-id`   | Defined in the `<id>` field of the [CE](https://github.com/Infineon?q=ce-manifest&type=&language=&sort=) manifest | Required
`--target-dir`| Specify the directory in which the application is to be created if you prefer not to use the default current working directory | Optional
`--user-app-name`| Specify the name of the application if you prefer to have a name other than the example's default name | Optional

<br>

The following example will clone the "[CCU8 PWM Complementary](https://github.com/Infineon/mtb-example-xmc-ccu8-pwm-complementary)" application with the desired name "Ccu8PWmCompliementary" configured for the *KIT_XMC47_RELAX_V1* BSP into the specified working directory, *C:/mtb_projects*:

   ```
   project-creator-cli --board-id KIT_XMC47_RELAX_V1 --app-id mtb-example-xmc-ccu8-pwm-complementary --user-app-name FceCrc --target-dir "C:/mtb_projects"
   ```

**Note:** The project-creator-cli tool uses the `git clone` and `make getlibs` commands to fetch the repository and import the required libraries. For details, see the "Project creator tools" section of the [ModusToolbox&trade; software user guide](https://www.infineon.com/ModusToolboxUserGuide) (locally available at *{ModusToolbox&trade; software install directory}/docs_{version}/mtb_user_guide.pdf*).

</details>

<details open><summary><b>In Third-party IDEs</b></summary>

**Note:** Only VS Code is supported.

1. Follow the instructions from the **In command-line interface (CLI)** section to create the application, and import the libraries using the `make getlibs` command.

2. Export the application to a supported IDE using the `make <ide>` command.

   For a list of supported IDEs and more details, see the "Exporting to IDEs" section of the [ModusToolbox&trade; software user guide](https://www.infineon.com/ModusToolboxUserGuide) (locally available at *{ModusToolbox&trade; software install directory}/docs_{version}/mtb_user_guide.pdf*).

3. Follow the instructions displayed in the terminal to create or import the application as an IDE project.

</details>

## Operation

1. Connect the board to your PC using a micro-USB cable through the debug USB connector.

2. Program the board using Eclipse IDE for ModusToolbox&trade; software:

   1. Select the application project in Project Explorer.

   2. In the **Quick Panel**, scroll down, and click **\<Application Name> Program (JLink)**.

3. Observe the CCU8 slice direct and inverted outputs on an oscilloscope. See the dead-time inserted between transitions (Figure 1).

   Output pins:
   - XMC4300 EtherCAT kit P2.9 (DIR),  P1.5 (INV)
   - All other XMC4000 kits P0.3 (DIR),  P0.0 (INV)
   - XMC1000 Kits  P0.0 (DIR),  P0.1 (INV)

   **Figure 1. Complementary PWM signals generated with dead-time**

   ![](images/pwm_comp_waveform.jpg)


## Debugging

You can debug the example to step through the code. In the IDE, use the **\<Application Name> Debug (JLink)** configuration in the **Quick Panel**. For more details, see the "Program and debug" section in the [Eclipse IDE for ModusToolbox&trade; user guide](https://www.infineon.com/MTBEclipseIDEUserGuide).

## Design and implementation

This example shows how the CCU8 peripheral of the XMC&trade; MCU works. The code does the following:

1. Defines two GPIOs for complementary PWM output. The GPIO's ports and pins are configured by the preprocessor depending on the selected MCU.

2. Configures the CCU8 slice as a timer in 'Edge Aligned' mode. To ensure that both PWM outputs are not HIGH at the same time, dead-time is configured and saved in the `dt_config` structure. Afterwards, the timer is initialized with the `PWM_PERIOD` period value and  `PWM_COMPARE`compare value using `XMC_CCU8_SLICE_SetTimerPeriodMatch` and `XMC_CCU8_SLICE_SetTimerCompareMatch()` functions.

3. Starts the timer. Both pins will be complementary and will be set HIGH and LOW depending on the dead-time, period, and compare values defined.

## Related resources

Resources  | Links
-----------|----------------------------------
Code examples  | [Using ModusToolbox&trade; software](https://github.com/Infineon/Code-Examples-for-ModusToolbox-Software) on GitHub
Device documentation | [XMC4000 family datasheets](https://www.infineon.com/cms/en/product/microcontroller/32-bit-industrial-microcontroller-based-on-arm-cortex-m/32-bit-xmc4000-industrial-microcontroller-arm-cortex-m4/#document-group-myInfineon-49) <br> [XMC4000 family technical reference manuals](https://www.infineon.com/cms/en/product/microcontroller/32-bit-industrial-microcontroller-based-on-arm-cortex-m/32-bit-xmc4000-industrial-microcontroller-arm-cortex-m4/#document-group-myInfineon-44) <br> [XMC1000 family datasheets](https://www.infineon.com/cms/en/product/microcontroller/32-bit-industrial-microcontroller-based-on-arm-cortex-m/32-bit-xmc1000-industrial-microcontroller-arm-cortex-m0/#document-group-myInfineon-49) <br> [XMC1000 family technical reference manuals](https://www.infineon.com/cms/en/product/microcontroller/32-bit-industrial-microcontroller-based-on-arm-cortex-m/32-bit-xmc1000-industrial-microcontroller-arm-cortex-m0/#document-group-myInfineon-44)
Development kits | [XMC&trade; eval boards](https://www.infineon.com/cms/en/product/microcontroller/32-bit-industrial-microcontroller-based-on-arm-cortex-m/#boards)
Libraries on GitHub  | [mtb-xmclib-cat3](https://github.com/Infineon/mtb-xmclib-cat3) – XMC&trade; peripheral driver library (XMCLib)
Tools  | [Eclipse IDE for ModusToolbox&trade; software](https://www.infineon.com/modustoolbox) – ModusToolbox&trade; software is a collection of easy-to-use software and tools enabling rapid development with Infineon MCUs, covering applications from embedded sense and control to wireless and cloud-connected systems using AIROC&trade; Wi-Fi and Bluetooth® connectivity devices.

## Other resources

Infineon provides a wealth of data at www.infineon.com to help you select the right device, and quickly and effectively integrate it into your design.

For XMC&trade; MCU devices, see [32-bit XMC™ industrial microcontroller based on Arm® Cortex®-M](https://www.infineon.com/cms/en/product/microcontroller/32-bit-industrial-microcontroller-based-on-arm-cortex-m/).

## Document history

Document title: *CE232581* – *XMC&trade; MCU: CCU8 PWM complementary*

| Version | Description of change               |
| ------- | ----------------------------------- |
| 1.0.0   | New code example                    |
| 1.0.1   | Updated README                      |
| 1.1.0   | Added support for new kits          |
| 2.0.0   | Updated to support ModusToolbox&trade; software v3.0; CE will not be backwards compatible with previous versions of ModusToolbox™ software |
| 2.1.0   | Added support for CCU8 personality and new Kits |
| 2.1.1   | Updated README        |
------

All other trademarks or registered trademarks referenced herein are the property of their respective owners.

© 2022 Infineon Technologies AG

All Rights Reserved.

### Legal disclaimer

The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party.

### Information

For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com).

### Warnings

Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office.

Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.

-------------------------------------------------------------------------------