Skip to content
Permalink
0935f0aa60
Switch branches/tags

Name already in use

A tag already exists with the provided branch name. Many Git commands accept both tag and branch names, so creating this branch may cause unexpected behavior. Are you sure you want to create this branch?
Go to file
 
 
Cannot retrieve contributors at this time

Wi-Fi Connection Manager (WCM)

What's included?

See the README.md for a complete description of the Wi-Fi Connection Manager.

Known issues

Problem Workaround
The cy_wcm_deinit API does not bring down the network stack because the default underlying lwIP stack does not have an implementation for deinit. Therefore, the expectation is that cy_wcm_init and cy_wcm_deinit APIs should be invoked only once. No workaround. Support will be added in a future release.
The cy_wcm_connect_ap API does not connect to AP if the MAC address is specified as a connection parameter. No workaround. This issue will be fixed in future release.
IAR 9.40.2 toolchain throws build errors on Debug mode if the application explicitly includes the iar_dlmalloc.h file Add '--advanced_heap' to LDFLAGS in the application Makefile.

Changelog

v3.6.0

  • Enabled 6G support

v3.5.0

  • Added support for CY8CEVAL-062S2-CYW955513SDM2WLIPA kit

v3.4.0

  • Added support for CYW955913EVK-01 kit

v3.3.1

  • Minor bug fixes

v3.3.0

  • WPS changes to support MBEDTLS version 3.4.0
  • Added support for CY8CEVAL-062S2-CYW43022CUB kit

v3.2.0

  • Added support for KIT_XMC72_EVK_MUR_43439M2 kit

v3.1.2

  • Minor bug fixes

v3.1.1

  • Updated documentation

v3.1.0

  • Enabled multi-core, virtual API support for the following WCM APIs:
    • cy_wcm_is_connected_to_ap
    • cy_wcm_register_event_callback
    • cy_wcm_deregister_event_callback
  • Enabled low power mode for 4390x devices
  • Updated documentation
  • Added support for new security type CY_WCM_SECURITY_WPA2_AES_PSK_SHA256
  • General bug fixes

v3.0.0

  • wifi-connection-manager updated to be network stack agnostic

  • Added support for CM0P core

  • Updated documentation

v2.3.0

  • Added support for WPA3-EXT SAE Supplicant

v2.2.0

  • Added support for the CY8CEVAL-062S2-MUR-43439M2 kit

v2.1.0

  • Added support for CYW943907AEVAL1F and CYW954907AEVAL1F kits

v2.0.4

  • Documentation updates
  • Minor updates and improvements added in connect to AP and WPS APIs
  • General bug fixes

v2.0.3

  • Added Coverity fixes

v2.0.2

  • Fixed passphrase length check for enterprise security auth types

v2.0.1

  • Minor fixes added in ping API, and in re-connection logic for statically assigned IP
  • WEP security support is disabled in connect AP API
  • Documentation updates

v2.0.0

  • Added support for SoftAP and concurrent (simultaneous SoftAP + STA) modes
  • Documentation updates

v1.1.0

  • Introduced APIs to get the following:
    • Connected AP information
    • WLAN interface statistics
    • IPv6 link-local address
    • Gateway IP address
    • Netmask IP address
    • Gateway MAC address
  • Introduced API to ping IPv4 address
  • Minor documentation updates

v1.0.1

  • Code snippets added to the documentation

v1.0.0

  • Initial release for Wi-Fi Connection Manager
  • Includes support for Wi-Fi Protected Setup (WPS) - Enrollee role
  • Exposes Wi-Fi APIs to scan, join, and leave a Wi-Fi network
  • Connection monitoring: Monitor active connections and link events. Provides a mechanism to register for event notification. Re-authenticates the connection with the AP in case of intermittent connection loss.

Supported software and tools

This version of the library was validated for compatibility with the following software and tools:

Software and tools Version
ModusToolbox™ software environment 3.2
ModusToolbox™ Device Configurator 4.20
GCC Compiler 11.3.1
IAR Compiler 9.40.2
Arm® Compiler 6 6.16